Dissolved Oxygen Sensors
1W-10068709-1111
VisiTrace Optical DO 120 mm VP for low ppb ranges (standalone
4-20 mA 2-wire device); replaced 1W-243560
1W-237150
Oxysens;Maint.free sensor with 5M integral cable for immersion application must also purchase 237158
1W-237395
OXYGOLD G 120 VP (For Power-Plant ppb DO applications)
1W-237540
OXYFERM FDA VP 120
(Replaces 1W-237400)
1W-243650
VisiWater Optical DO 120mm with 10M integral cable for wastewater apps. Standalone 4-20mA device.
2
Electrode Cables
1W-355109
3 meter Variopin cable; (REQUIRED for VP sensor)
1W-355110
5 meter Variopin cable; (REQUIRED for VP sensor)
1W-355111
10 meter Variopin cable; (REQUIRED for VP sensor)
1W-355218
3 Meter VP8 Cable for use with VIsiFerm
1W-355219
5 Meter VP8 Cable for use with VIsiFerm
1W-355220
10 Meter VP8 Cable for use with VIsiFerm
1W-355283
M12 Sensor Cable 3M for VisiTrace
1W-355284
M12 Sensor Cable 5Mfor VisiTrace
1W-355285
M12 Sensor Cable 10M for VisiTrace
Alternate Fittings
1W-237158
Immersion Set for use with 237150
1W-237331-25
FLEXIFIT BIO-25 (25mm Port / Ingold Port fitting; 25mm seal point)
1W-237341
FLEXIFIT TC 150-33 (1.5" Tri-Clamp fitting)
K1598AC
Flow Fitting; 316 SS 1/4" x 1/4" x 3/4" (/FF option) (for -AD mounting option only) (Replaced the K1598AB)
M1263LP
Stainless Steel adapter to convert to 3/4" NPT to be used with K1598AC flow thru holder (Equivalent to K1523JD; replaced S200468G1)
Accessories for Optical DO
1W-242411
USB-ModBus RS485 Converter used for VisiWater Calibrations. External 24 VDC (i.e. AAK Corp CM24.1) power must be used to power the sensor.
1W-243490-01
ARC Calibration USB and Power Cable device for VP Arc Sensors (VisiFerm).
1W-243499
Wireless ARC Calibration USB Converter with Blue Tooth for use with VisiTrace; Also need 1W-355288 M12 Power Cable
1W-243505
VisiFerm H2 cap with additional PTFE layer and hygenic design for rather demanding applications
(replaced 1W-243510)
1W-243515
VisiFerm Standard Sensor Replacement H0 Cap
(replaces 1W-242427 P0 Cap)
1W-243530
VisiTrace Replacement ODO Cap L0
1W-243575
Calibration Stand for Optical Do sensors. Allows for connection of gases to do Zero (air) and span
1W-355288
M12 Calibration Cable with Power for use with VisiTrace; Also need 1W-243499 for calibration
Accessories for Polargraphic DO Sensors
1W-237118
OXYLYTE ELECTROLYTE (For OXYFERM) (30 ml bottle)(Due to new HAZCOM rules the volume was changed from 50 ml to 30ml)
1W-237123
OXYFERM MEMBRANE KIT (KIT OF 3)(No electrolyte is included)
1W-237135
OXYGOLD G MEMBRANE KIT (KIT OF 3)(No electrolyte is included)
1W-237139
OXYLYTE G ELECTROLYTE (For OXYGOLD G) (30 ml bottle)(Due to new HAZCOM rules the volume was changed from 50 ml to 30ml)
1W-237350
Polarization Module for OXYFERM VP and OXYGOLD G
1W-237427
OXYGOLD G CATHODE
Loading...