Loading...Type at least 2 characters to begin search.
No records found.
- Model: R/820M Manual Retractable
- Model: PH18 DIFFERENTIAL pH SENSOR
- Model: FLXA202 2-WIRE LOOPED POWER ANALYZER
- Model: ZR22S Explosionproof Oxygen Analyzer Detector
- Model: ZR202S Explosion proof Oxygen Analyzer Detector
- Model: AV550G Averaging Zirconia Oxygen Converter
- Model: DO71 Optical Dissolved Oxygen Sensor
- Model: DO72 Optical Dissolved Oxygen Sensor
- Model: FU20 Universal pH/ORP Sensor
- Model: SC42 CONDUCTIVITY SENSOR Pt 1000 Temperature Element
- Model: ISC40FF FLOW THROUGH FITTING
- Model: FU24 Universal pH/ORP Sensor for Harsh Applications
- Model: AWF10 Extension Cable, Multi-Core, Shielded for Low Voltage, High Impedance
- Model: ISC40FS FLOW SUB-ASSEMBLY
- Model: ZR802S Ex-proof Zirconia Oxygen converter
- Model: PH21 Wide Body sensor for water and wastewater - pH Only no Liquid Earth
- Model: BA11 Active Junction Box
- Model: PR10 Retractable pH/ORP Assembly
- Model: SC72 PORTABLE CONDUCTIVITY METER (NO SENSOR, select below); Only available until 10/31/24 if still in stock.
- Model: ZR802G Zirconia Oxygen/Humidity Analyzer
- Model: PG400 Pulse generator for clean unit
- Model: FLXA402T Liquid Analyzer for Turbidity and Chlori
- Model: PB350G Slant Type Float Holder
- Model: ZR22P High Temperature Probe Adapter
- Model: GDW Two Core, Double Shielded cable, both ends finished with cable pins
- Model: IAC24 Integral Auto Calibration Unit
- Model: AV55CM Channel Card
- Model: IB100 Interface box for SENCOM
- Model: WU11 SENCOM Cable
- Model: WU10 Variopin cable
- Model: R/340 Static Sensor Holder
- Model: WE10 Generic cable
- Model: R/810M Manual Retractable Holder
- Model: SC25V Combination pH, Reference, Temperature and solution ground 12mm Electrode
- Model: R/AC1 Single Channel Auto Calibration
- Model: MC1 Single Channel Manual Calibration
- Model: AC4 4 Channel Auto Calibration System
- Model: AC8 8 Channel Auto Calibration System
- Model: GD40G General Purpose Detector
- Model: GD40T FM Certified Dectector
- Model: GD40V CSA Certified Detector
- Model: ISC40FD IMMERSION FITTING (For ISC40 *G Sensors Only)
- Model: FF40 CONDUCTIVITY FLOW ASSEMBLY (For Large Bore Sensors)
- Model: SR20 Reference Electrodes Only
- Model: ISC40G General Purpose Inductive Conductivity Sensor
- Model: ISC40S Intrinsically Safe Inductive Conductivity Sensor
- Model: AFD20 IMMERSION pH/ORP SENSOR
- Model: SM21 pH Measuring Electrodes Only
- Model: SM60 Temperature Electrodes (only to be used with pH/ORP electrode measurement setups)
- Model: WU40 Conductivity Sensor Cable
- Model: UM33A Digital Indicator with alarms (retransmission outputs or 15 VDC loop power supply, 2DI, 3DO)
- Model: PH87 TITANIUM RETRACTABLE pH ASSEMBLY WITH JUNCTION BOX
- Model: WU20 Cables for use with the SM21, SR20, SM60, SM29 Electrodes
- Model: TB820D Right Angle Scattering Turbidity Detector
- Model: FC800D Non-reagent Type Free Chlorine Sensor
- Model: SX42 HIGH PRESSURE/ TEMP CONDUCTIVITY SENSOR (Pt1000 RTD)
- Model: ZR22G Zirconia Oxygen/Humidity Analyzer Detector
- Model: ZR202G Integral Type Zirconia Oxygen/Humidity Analyzer
- Model: AFF20 FLOW THROUGH pH/ORP SENSOR
- Model: SA11 SENCOM Smart Adapter
- Model: SC4A CONDUCTIVITY SENSOR
- Model: DO30G Dissolved Oxygen Sensor
- Model: DOX8HS Submersion Type Holder
- Model: GD402G General Purpose Converter
- Model: GD402T FM Certified Converter
- Model: FLXA402 4-Wire Converter
- Model: ZR202A ZR202 Heater Strut
- Model: ZR22A ZR22 Heater Strut
- Model: OX400 Extractive Low Concentration Oxygen Analzyer
- Model: AFS20 ON-LINE pH/ORP SENSOR
- Model: ZR22R Low Temperature Probe Protector
- Model: ZR22V Low Temperature Probe Support
-
Model: R/SC42 SMALL BORE CONDUCTIVITY SENSOR (2-ELECTRODE) PT1000 TEMP SENSOR
- Configuration Page For: MODEL SC42 Conductivity 2-Electrode SMALL-BORE CONDUCTIVITY SENSORS CONDUCTIVITY
- Configuration Page For: MODEL SC42 Tri-Clover 2-Electrode SMALL-BORE CONDUCTIVITY SENSORS CONDUCTIVITY
- Configuration Page For: MODEL SC42 HIGH PRESSURE, HIGH TEMPERATURE SMALL-BORE CONDUCTIVITY SENSORS CONDUCTIVITY
- Model: WZ High Temp Cable (FEP Jacket (Up to 390ºF)(200ºC))
- Model: FS40 CONDUCTIVITY FLOW ASSEMBLY (For Large Bore Sensors)
- Part/Accessory: 1W-242428-1112 POLILYTE PLUS VP (Replaced 1W-242428)
- Part/Accessory: 1W-242428-3111 CLARYTRODE 120 VP (with integral Pt100 RTD) (for HF applications) (Replaced 1W-238831)
- Part/Accessory: 1W-242428-3131 CLARYTRODE 225 VP (with integral Pt100 RTD) (for HF applications)
- Part/Accessory: 1W-242428-3213 CLARYTRODE 120 (for HF applications) (Replaced 1W-238821)
- Part/Accessory: 1W-243632-2111 EasyFerm Food 120 VP (Replaced 1W-243632)
- Part/Accessory: 1W-355109 3 meter Variopin cable; (REQUIRED for VP sensor)
- Part/Accessory: 1W-355110 5 meter Variopin cable; (REQUIRED for VP sensor)
- Part/Accessory: 1W-355111 10 meter Variopin cable; (REQUIRED for VP sensor)
- Part/Accessory: 1W-237331-25 FLEXIFIT BIO-25 (25mm Port / Ingold Port fitting; 25mm seal point)
- Part/Accessory: 1W-237341 FLEXIFIT TC 150-33 (1.5" Tri-Clamp fitting)
- Part/Accessory: 1W-238227 ORP 475 mV Standard Solution 500 ml
- Part/Accessory: 1W-238228 ORP 271 mV Standard Solution 500 ml
- Part/Accessory: 1W-238359 INCHTRODE N75PC10 (for Submersion applications) 10M Integral Cable
- Part/Accessory: 1W-238633-1111 EASYFERM PLUS 120 VP (with integral Pt100 RTD) (Replaced 1W-238633)
- Part/Accessory: 1W-238633-1112 EasyFerm Plus VP 120 PT1000 (pH ONLY)
- Part/Accessory: 1W-238633-1142 EasyFerm Plus VP 225 PT1000 (pH ONLY)
-
Part/Accessory: K1520JN PG13.5 adaptor for F*20 (PP) (-SN option)
- Part/Accessories List For: PHARMACEUTICAL pH SENSORS MANUFACTURED BY HAMILTON pH
- Part/Accessories List For: pH/ORP ELECTRODES FOR FF20, FS20, AND FD20 CODE DESCRIPTIONS pH
- Part/Accessories List For: MODEL DO71 OPTICAL DISSOLVED OXYGEN SENSOR DISSOLVED OXYGEN
- Part/Accessories List For: MODEL DO72 OPTICAL DISSOLVED OXYGEN SENSOR DISSOLVED OXYGEN
- Part/Accessories List For: ANALYTICAL SPARE PARTS - pH SPARE PARTS - pH
- Part/Accessories List For: MODEL SC25V 12mm COMBINATION ELECTRODE pH
-
Part/Accessory: K1598AC Flow Fitting; 316 SS 1/4" x 1/4" x 3/4" (/FF option) (for -AD mounting option only) (Replaced the K1598AB)
- Part/Accessories List For: PHARMACEUTICAL pH SENSORS MANUFACTURED BY HAMILTON pH
- Part/Accessories List For: MODEL SC25V 12mm COMBINATION ELECTRODE pH
- Part/Accessories List For: DISSOLVED OXYGEN SENSORS MANUFACTURED BY HAMILTON DISSOLVED OXYGEN
- Part/Accessories List For: MODEL SC4A 19 mm CONDUCTIVITY SENSORS CONDUCTIVITY
-
Part/Accessory: M1263LP Stainless Steel adapter to convert to 3/4" NPT to be used with K1598AC flow thru holder (Equivalent to K1523JD; replaced S200468G1)
- Part/Accessories List For: PHARMACEUTICAL pH SENSORS MANUFACTURED BY HAMILTON pH
- Part/Accessories List For: MODEL DO72 OPTICAL DISSOLVED OXYGEN SENSOR DISSOLVED OXYGEN
- Part/Accessories List For: ANALYTICAL SPARE PARTS - pH SPARE PARTS - pH
- Part/Accessories List For: MODEL SC25V 12mm COMBINATION ELECTRODE pH
- Part/Accessories List For: DISSOLVED OXYGEN SENSORS MANUFACTURED BY HAMILTON DISSOLVED OXYGEN
- Part/Accessory: 1W-242428-1122 PH ONLY Measurement: Polilyte Plus pH Probe 225 mm, 130C for use in harsh application (Replaced 1W-242429)
- Part/Accessory: 1W-2-075-03-005 Manual Drive unit- 225mm Sensor Length
- Part/Accessory: 1W-2-086-23-001 Set blind plug G1/8 PVDF for cleaning chamber
- Part/Accessory: 1W-2-123-40-001 Sealing Set EPDM
- Part/Accessory: 1W-2-123-41-001 Sealing Set Viton
- Part/Accessory: 1W-2-123-42-001 Sealing Set FFKM (Kalrez)
- Part/Accessory: 1W-238634 EasyFerm Plus VP pH ONLY 225 mm 0-135˚C) For Food& Bev, Pharma applications)
- Part/Accessory: 1W-238999-3069 EasyFerm Plus VP pH/Rx 225
- Part/Accessory: 1W-238999-3224 EasyFerm Plus VP Rx 225
- Part/Accessory: 1W-238999-5271 PH AND ORP MEASUREMENT: Polilyte Plus H Probe 225 mm, 130C for use in harsh application to measure both pH and ORP at the same time
-
Part/Accessory: M1100EU (500ml of each 4.01,6.86 and 9.18)
- Part/Accessories List For: MODEL 820M EXtract Manual Retractable Holder pH
- Part/Accessories List For: MODEL FU20 pH/ORP SENSOR pH
- Part/Accessories List For: MODEL FU24 pH/ORP SENSOR pH
- Part/Accessories List For: MODEL PR10 PR10 Retractable pH/ORP Assembly pH
- Part/Accessories List For: ANALYTICAL SPARE PARTS - pH SPARE PARTS - pH
- Part/Accessories List For: MODEL 810M EXtract Manual Retractable Holder pH
- Part/Accessories List For: MODEL SC25V 12mm COMBINATION ELECTRODE pH
- Part/Accessories List For: MODEL AFD20 Matrix IMMERSION pH/ORP SENSOR pH
- Part/Accessories List For: MODEL PH72 PORTABLE pH / ORP METER pH & ORP Hand held
- Part/Accessories List For: MODEL AFF20 Matrix FLOW THROUGH pH/ORP SENSOR pH
- Part/Accessories List For: MODEL AFS20 Matrix ON-LINE pH/ORP SENSOR pH
-
Part/Accessory: M1100UTX Certificate of Conformance (This is a statement that our products conform to our general specifications)
- Part/Accessories List For: MODEL 820M EXtract Manual Retractable Holder pH
- Part/Accessories List For: ANALYTICAL SPARE PARTS - MISC SPARE PARTS - MISC
- Part/Accessories List For: MODEL WF10 EXTENSION CABLE FOR pH SC ISC DO pH
- Part/Accessories List For: MODEL 810M EXtract Manual Retractable Holder pH
- Part/Accessories List For: MODEL SR20 REFERENCE ELECTRODES pH
- Part/Accessories List For: MODEL SM21 pH MEASURING ELECTRODES pH
- Part/Accessories List For: MODEL SM60 TEMPERATURE ELECTRODES pH
- Part/Accessories List For: MODEL WU40 CONDUCTIVITY CABLE CONDUCTIVITY
- Part/Accessories List For: MODEL AFF20 Matrix FLOW THROUGH pH/ORP SENSOR pH
-
Part/Accessory: M1202JHCD3DAN001 Analytical 3D Drawing
- Part/Accessories List For: MODEL 820M EXtract Manual Retractable Holder pH
- Part/Accessories List For: ANALYTICAL SPARE PARTS - MISC SPARE PARTS - MISC
- Part/Accessories List For: MODEL ZR22S EXPLOSIONPROOF OXYGEN DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR202S EXPLOSIONPROOF OXYGEN ANALYZER DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL AV550G AVERAGING CONVERTER OXYGEN HUMIDITY
- Part/Accessories List For: MODEL WF10 EXTENSION CABLE FOR pH SC ISC DO pH
- Part/Accessories List For: MODEL ZR22P HIGH TEMPERATURE PROBE ADAPTER OXYGEN HUMIDITY
- Part/Accessories List For: MODEL GDW DETECTOR CABLE / SAMPLE CONDITIONER DENSITY
- Part/Accessories List For: MODEL IAC24 INTEGRAL AUTOCAL UNIT OXYGEN HUMIDITY
- Part/Accessories List For: Model AV55CM Replacement Channel Cards for AV550G DIRECT INSERTION TYPE ZIRCONIA OXYGEN ANALYZER OXYGEN HUMIDITY
- Part/Accessories List For: MODEL 810M EXtract Manual Retractable Holder pH
- Part/Accessories List For: Model AC1 Automatic Calibration Unit REMOTE AUTO CALIBRATION OXYGEN HUMIDITY
- Part/Accessories List For: Model MC1 Manual Calibration Unit MANUAL CALIBRATION OXYGEN HUMIDITY
- Part/Accessories List For: MODEL AC4/AC8 Automatic Calibration Unit AUTOMATIC CALIBRATION FOR AV550 OXYGEN HUMIDITY
- Part/Accessories List For: MODEL GD40G/GD40T/GD40V GAS DENSITY DETECTOR DENSITY
- Part/Accessories List For: MODEL SR20 REFERENCE ELECTRODES pH
- Part/Accessories List For: MODEL SM21 pH MEASURING ELECTRODES pH
- Part/Accessories List For: MODEL SM60 TEMPERATURE ELECTRODES pH
- Part/Accessories List For: MODEL WU40 CONDUCTIVITY CABLE CONDUCTIVITY
- Part/Accessories List For: MODEL ZR22G ZIRCONIA OXYGEN HUMIDITY ANALYZER DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR202G INTEGRAL TYPE OXYGEN/HUMIDITY ANALYZER OXYGEN HUMIDITY
- Part/Accessories List For: MODEL AFF20 Matrix FLOW THROUGH pH/ORP SENSOR pH
- Part/Accessories List For: MODEL GD402G/GD402T/GD402V GAS DENSITY CONVERTER DENSITY
- Part/Accessories List For: Model ZR22A Replacement Heater Struts FOR ZR22 OR ZR202 DETECTORS OXYGEN HUMIDITY
- Part/Accessories List For: MODEL OX400 Extractive Oxygen Analyzer OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR22R LOW TEMPERATURE PROBE PROTECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR22V LOW TEMPERATURE PROBE SUPPORT OXYGEN HUMIDITY
- Part/Accessories List For: MODEL WZ Cable for ZR22G/S WIRING AND CABLING OXYGEN HUMIDITY
-
Part/Accessory: M1202JHCDAN001 Certified Dimensional Drawing
- Part/Accessories List For: MODEL 820M EXtract Manual Retractable Holder pH
- Part/Accessories List For: ANALYTICAL SPARE PARTS - MISC SPARE PARTS - MISC
- Part/Accessories List For: MODEL ZR22S EXPLOSIONPROOF OXYGEN DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR202S EXPLOSIONPROOF OXYGEN ANALYZER DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL AV550G AVERAGING CONVERTER OXYGEN HUMIDITY
- Part/Accessories List For: MODEL WF10 EXTENSION CABLE FOR pH SC ISC DO pH
- Part/Accessories List For: MODEL ZR22P HIGH TEMPERATURE PROBE ADAPTER OXYGEN HUMIDITY
- Part/Accessories List For: MODEL GDW DETECTOR CABLE / SAMPLE CONDITIONER DENSITY
- Part/Accessories List For: MODEL IAC24 INTEGRAL AUTOCAL UNIT OXYGEN HUMIDITY
- Part/Accessories List For: Model AV55CM Replacement Channel Cards for AV550G DIRECT INSERTION TYPE ZIRCONIA OXYGEN ANALYZER OXYGEN HUMIDITY
- Part/Accessories List For: MODEL 810M EXtract Manual Retractable Holder pH
- Part/Accessories List For: Model AC1 Automatic Calibration Unit REMOTE AUTO CALIBRATION OXYGEN HUMIDITY
- Part/Accessories List For: Model MC1 Manual Calibration Unit MANUAL CALIBRATION OXYGEN HUMIDITY
- Part/Accessories List For: MODEL AC4/AC8 Automatic Calibration Unit AUTOMATIC CALIBRATION FOR AV550 OXYGEN HUMIDITY
- Part/Accessories List For: MODEL GD40G/GD40T/GD40V GAS DENSITY DETECTOR DENSITY
- Part/Accessories List For: MODEL SR20 REFERENCE ELECTRODES pH
- Part/Accessories List For: MODEL SM21 pH MEASURING ELECTRODES pH
- Part/Accessories List For: MODEL SM60 TEMPERATURE ELECTRODES pH
- Part/Accessories List For: MODEL WU40 CONDUCTIVITY CABLE CONDUCTIVITY
- Part/Accessories List For: MODEL ZR22G ZIRCONIA OXYGEN HUMIDITY ANALYZER DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR202G INTEGRAL TYPE OXYGEN/HUMIDITY ANALYZER OXYGEN HUMIDITY
- Part/Accessories List For: MODEL AFF20 Matrix FLOW THROUGH pH/ORP SENSOR pH
- Part/Accessories List For: MODEL GD402G/GD402T/GD402V GAS DENSITY CONVERTER DENSITY
- Part/Accessories List For: Model ZR22A Replacement Heater Struts FOR ZR22 OR ZR202 DETECTORS OXYGEN HUMIDITY
- Part/Accessories List For: MODEL OX400 Extractive Oxygen Analyzer OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR22R LOW TEMPERATURE PROBE PROTECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR22V LOW TEMPERATURE PROBE SUPPORT OXYGEN HUMIDITY
- Part/Accessories List For: MODEL WZ Cable for ZR22G/S WIRING AND CABLING OXYGEN HUMIDITY
-
Part/Accessory: M1202JHCDAN002 Custom Certified Drawing: this would be anything that causes a change to our standard drawing, Price depends on what is on the drawing (Example: System Wiring)
- Part/Accessories List For: MODEL 820M EXtract Manual Retractable Holder pH
- Part/Accessories List For: ANALYTICAL SPARE PARTS - MISC SPARE PARTS - MISC
- Part/Accessories List For: MODEL ZR22S EXPLOSIONPROOF OXYGEN DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR202S EXPLOSIONPROOF OXYGEN ANALYZER DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL AV550G AVERAGING CONVERTER OXYGEN HUMIDITY
- Part/Accessories List For: MODEL WF10 EXTENSION CABLE FOR pH SC ISC DO pH
- Part/Accessories List For: MODEL ZR22P HIGH TEMPERATURE PROBE ADAPTER OXYGEN HUMIDITY
- Part/Accessories List For: MODEL GDW DETECTOR CABLE / SAMPLE CONDITIONER DENSITY
- Part/Accessories List For: MODEL IAC24 INTEGRAL AUTOCAL UNIT OXYGEN HUMIDITY
- Part/Accessories List For: Model AV55CM Replacement Channel Cards for AV550G DIRECT INSERTION TYPE ZIRCONIA OXYGEN ANALYZER OXYGEN HUMIDITY
- Part/Accessories List For: MODEL 810M EXtract Manual Retractable Holder pH
- Part/Accessories List For: Model AC1 Automatic Calibration Unit REMOTE AUTO CALIBRATION OXYGEN HUMIDITY
- Part/Accessories List For: Model MC1 Manual Calibration Unit MANUAL CALIBRATION OXYGEN HUMIDITY
- Part/Accessories List For: MODEL AC4/AC8 Automatic Calibration Unit AUTOMATIC CALIBRATION FOR AV550 OXYGEN HUMIDITY
- Part/Accessories List For: MODEL GD40G/GD40T/GD40V GAS DENSITY DETECTOR DENSITY
- Part/Accessories List For: MODEL SR20 REFERENCE ELECTRODES pH
- Part/Accessories List For: MODEL SM21 pH MEASURING ELECTRODES pH
- Part/Accessories List For: MODEL SM60 TEMPERATURE ELECTRODES pH
- Part/Accessories List For: MODEL WU40 CONDUCTIVITY CABLE CONDUCTIVITY
- Part/Accessories List For: MODEL ZR22G ZIRCONIA OXYGEN HUMIDITY ANALYZER DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR202G INTEGRAL TYPE OXYGEN/HUMIDITY ANALYZER OXYGEN HUMIDITY
- Part/Accessories List For: MODEL AFF20 Matrix FLOW THROUGH pH/ORP SENSOR pH
- Part/Accessories List For: MODEL GD402G/GD402T/GD402V GAS DENSITY CONVERTER DENSITY
- Part/Accessories List For: Model ZR22A Replacement Heater Struts FOR ZR22 OR ZR202 DETECTORS OXYGEN HUMIDITY
- Part/Accessories List For: MODEL OX400 Extractive Oxygen Analyzer OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR22R LOW TEMPERATURE PROBE PROTECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR22V LOW TEMPERATURE PROBE SUPPORT OXYGEN HUMIDITY
- Part/Accessories List For: MODEL WZ Cable for ZR22G/S WIRING AND CABLING OXYGEN HUMIDITY
-
Part/Accessory: M1202JHCDAN003 Analytical 2D CAD Drawings (.dwg file format)
- Part/Accessories List For: MODEL 820M EXtract Manual Retractable Holder pH
- Part/Accessories List For: ANALYTICAL SPARE PARTS - MISC SPARE PARTS - MISC
- Part/Accessories List For: MODEL ZR22S EXPLOSIONPROOF OXYGEN DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR202S EXPLOSIONPROOF OXYGEN ANALYZER DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL AV550G AVERAGING CONVERTER OXYGEN HUMIDITY
- Part/Accessories List For: MODEL WF10 EXTENSION CABLE FOR pH SC ISC DO pH
- Part/Accessories List For: MODEL ZR22P HIGH TEMPERATURE PROBE ADAPTER OXYGEN HUMIDITY
- Part/Accessories List For: MODEL GDW DETECTOR CABLE / SAMPLE CONDITIONER DENSITY
- Part/Accessories List For: MODEL IAC24 INTEGRAL AUTOCAL UNIT OXYGEN HUMIDITY
- Part/Accessories List For: Model AV55CM Replacement Channel Cards for AV550G DIRECT INSERTION TYPE ZIRCONIA OXYGEN ANALYZER OXYGEN HUMIDITY
- Part/Accessories List For: MODEL 810M EXtract Manual Retractable Holder pH
- Part/Accessories List For: Model AC1 Automatic Calibration Unit REMOTE AUTO CALIBRATION OXYGEN HUMIDITY
- Part/Accessories List For: Model MC1 Manual Calibration Unit MANUAL CALIBRATION OXYGEN HUMIDITY
- Part/Accessories List For: MODEL AC4/AC8 Automatic Calibration Unit AUTOMATIC CALIBRATION FOR AV550 OXYGEN HUMIDITY
- Part/Accessories List For: MODEL GD40G/GD40T/GD40V GAS DENSITY DETECTOR DENSITY
- Part/Accessories List For: MODEL SR20 REFERENCE ELECTRODES pH
- Part/Accessories List For: MODEL SM21 pH MEASURING ELECTRODES pH
- Part/Accessories List For: MODEL SM60 TEMPERATURE ELECTRODES pH
- Part/Accessories List For: MODEL WU40 CONDUCTIVITY CABLE CONDUCTIVITY
- Part/Accessories List For: MODEL ZR22G ZIRCONIA OXYGEN HUMIDITY ANALYZER DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR202G INTEGRAL TYPE OXYGEN/HUMIDITY ANALYZER OXYGEN HUMIDITY
- Part/Accessories List For: MODEL AFF20 Matrix FLOW THROUGH pH/ORP SENSOR pH
- Part/Accessories List For: MODEL GD402G/GD402T/GD402V GAS DENSITY CONVERTER DENSITY
- Part/Accessories List For: Model ZR22A Replacement Heater Struts FOR ZR22 OR ZR202 DETECTORS OXYGEN HUMIDITY
- Part/Accessories List For: MODEL OX400 Extractive Oxygen Analyzer OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR22R LOW TEMPERATURE PROBE PROTECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR22V LOW TEMPERATURE PROBE SUPPORT OXYGEN HUMIDITY
- Part/Accessories List For: MODEL WZ Cable for ZR22G/S WIRING AND CABLING OXYGEN HUMIDITY
-
Part/Accessory: M1202JHDBAN001 Analytical Project Data Book (Price per book)
- Part/Accessories List For: MODEL 820M EXtract Manual Retractable Holder pH
- Part/Accessories List For: ANALYTICAL SPARE PARTS - MISC SPARE PARTS - MISC
- Part/Accessories List For: MODEL ZR22S EXPLOSIONPROOF OXYGEN DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR202S EXPLOSIONPROOF OXYGEN ANALYZER DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL AV550G AVERAGING CONVERTER OXYGEN HUMIDITY
- Part/Accessories List For: MODEL WF10 EXTENSION CABLE FOR pH SC ISC DO pH
- Part/Accessories List For: MODEL ZR22P HIGH TEMPERATURE PROBE ADAPTER OXYGEN HUMIDITY
- Part/Accessories List For: MODEL GDW DETECTOR CABLE / SAMPLE CONDITIONER DENSITY
- Part/Accessories List For: MODEL IAC24 INTEGRAL AUTOCAL UNIT OXYGEN HUMIDITY
- Part/Accessories List For: Model AV55CM Replacement Channel Cards for AV550G DIRECT INSERTION TYPE ZIRCONIA OXYGEN ANALYZER OXYGEN HUMIDITY
- Part/Accessories List For: MODEL 810M EXtract Manual Retractable Holder pH
- Part/Accessories List For: Model AC1 Automatic Calibration Unit REMOTE AUTO CALIBRATION OXYGEN HUMIDITY
- Part/Accessories List For: Model MC1 Manual Calibration Unit MANUAL CALIBRATION OXYGEN HUMIDITY
- Part/Accessories List For: MODEL AC4/AC8 Automatic Calibration Unit AUTOMATIC CALIBRATION FOR AV550 OXYGEN HUMIDITY
- Part/Accessories List For: MODEL GD40G/GD40T/GD40V GAS DENSITY DETECTOR DENSITY
- Part/Accessories List For: MODEL SR20 REFERENCE ELECTRODES pH
- Part/Accessories List For: MODEL SM21 pH MEASURING ELECTRODES pH
- Part/Accessories List For: MODEL SM60 TEMPERATURE ELECTRODES pH
- Part/Accessories List For: MODEL WU40 CONDUCTIVITY CABLE CONDUCTIVITY
- Part/Accessories List For: MODEL ZR22G ZIRCONIA OXYGEN HUMIDITY ANALYZER DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR202G INTEGRAL TYPE OXYGEN/HUMIDITY ANALYZER OXYGEN HUMIDITY
- Part/Accessories List For: MODEL AFF20 Matrix FLOW THROUGH pH/ORP SENSOR pH
- Part/Accessories List For: MODEL GD402G/GD402T/GD402V GAS DENSITY CONVERTER DENSITY
- Part/Accessories List For: Model ZR22A Replacement Heater Struts FOR ZR22 OR ZR202 DETECTORS OXYGEN HUMIDITY
- Part/Accessories List For: MODEL OX400 Extractive Oxygen Analyzer OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR22R LOW TEMPERATURE PROBE PROTECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR22V LOW TEMPERATURE PROBE SUPPORT OXYGEN HUMIDITY
- Part/Accessories List For: MODEL WZ Cable for ZR22G/S WIRING AND CABLING OXYGEN HUMIDITY
- Part/Accessory: 1W-237230 /BSA1 = 316 Stainless Steel Blind Plug with mounting nut (replaced K1522MV and K1500BT-which was the mounting nut only)
- Part/Accessory: K1520EJ Straight Weld-In Adapter 316 Stainless Steel without mounting nut (replaces K1522ER)
- Part/Accessory: K1520EK Angled weld in 25 mm Adapter without mounting nut (replacement for /SWA option K1522EQ)
- Part/Accessory: K1542FA Straight weld in 25 mm Adapter with mounting nut
- Part/Accessory: M1263XY Complete PH18 O-ring Kit (QTY 1 O-ring of each size)
- Part/Accessory: M1289GX /SNS = 1.0 inch NPT Adapter 316 Stainless Steel (replaced K1522ES)
-
Part/Accessory: R/M1293SK Stainless steel tag shipped along with analyzer (shorter lead-time)
- Part/Accessories List For: MODEL PH18 DIFFERENTIAL PH SENSOR pH
- Part/Accessories List For: MODEL FLXA202 2-WIRE TRANSMITTER 2-Wire Analyzer
- Part/Accessories List For: MODEL FU20 pH/ORP SENSOR pH
- Part/Accessories List For: MODEL SC42 LARGE BORE CONDUCTIVITY SENSORS CONDUCTIVITY
- Part/Accessories List For: MODEL ISC40FF INDUCTIVE CONDUCTIVITY FLOW FITTINGS INDUCTIVE CONDUCTIVITY
- Part/Accessories List For: MODEL ISC40FS INDUCTIVE CONDUCTIVITY FLOW SUB-ASSEMBLY INDUCTIVE CONDUCTIVITY
- Part/Accessories List For: Model ZR802S EXPLOSIONPROOF ZIRCONIA OXYGEN/HUMIDITY ANALYZER Oxygen Humidity
- Part/Accessories List For: MODEL PR10 PR10 Retractable pH/ORP Assembly pH
- Part/Accessories List For: MODEL PR10 PR10 RETRACTABLE ASSEMBLY INDUCTIVE CONDUCTIVITY
- Part/Accessories List For: Model ZR802G ZIRCONIA OXYGEN/HUMIDITY ANALYZER OXYGEN HUMIDITY
- Part/Accessories List For: Pulse Generator PG400 PG400
- Part/Accessories List For: MODEL FLXA402T Turbidity and Chlorine Analyzer Liquid Analyzer
- Part/Accessories List For: MODEL ISC40FD INDUCTIVE CONDUCTIVITY IMMERSION FITTING INDUCTIVE CONDUCTIVITY
- Part/Accessories List For: MODEL FF40 CONDUCTIVITY FLOW ASSEMBLY CONDUCTIVITY
- Part/Accessories List For: MODEL ISC40G/ISC40S INDUCTIVE CONDUCTIVITY SENSOR INDUCTIVE CONDUCTIVITY
- Part/Accessories List For: MODEL PH87 / PH97 RETRACTABLE pH ASSEMBLY AND SENSOR pH
- Part/Accessories List For: MODEL TB820D Turbidity Analyzer Turbidity
- Part/Accessories List For: MODEL FC800D Free Chlorine Analyzer Chlorine
- Part/Accessories List For: MODEL SX42 HIGH PRESS./ TEMP. LARGE BORE CONDUCTIVITY SENSORS CONDUCTIVITY
- Part/Accessories List For: MODEL SC4A 19 mm CONDUCTIVITY SENSORS CONDUCTIVITY
- Part/Accessories List For: MODEL PR10 PR10 Retractable Assembly CONDUCTIVITY
- Part/Accessories List For: MODEL DO30G DISSOLVED OXYGEN SENSOR DISSOLVED OXYGEN
- Part/Accessories List For: MODEL FLXA402 4-Wire Analyzer 4-Wire Analyzer
- Part/Accessories List For: MODEL SC42 Conductivity 2-Electrode SMALL-BORE CONDUCTIVITY SENSORS CONDUCTIVITY
- Part/Accessories List For: MODEL FS40 CONDUCTIVITY FLOW SUB ASSEMBLY CONDUCTIVITY
- Part/Accessories List For: MODEL SC42 Tri-Clover 2-Electrode SMALL-BORE CONDUCTIVITY SENSORS CONDUCTIVITY
- Part/Accessories List For: MODEL SC42 HIGH PRESSURE, HIGH TEMPERATURE SMALL-BORE CONDUCTIVITY SENSORS CONDUCTIVITY
- Part/Accessory: 1W-KFD2-HLC-EX1.D HART Converter (PEPPERL+FUCHS KFD2-HLC-EX1.D)
- Part/Accessory: BA10 Junction Box (General Purpose)
- Part/Accessory: K9699WG 4 pieces of 1/2" NPT Conduit Adapters (/CD4 option) (THIS ITEM IS NOT STOCK AND HAS LONGER LEAD TIME CONSULT FACTORY) Can only be used with -A* & -C* versions of analyzer
- Part/Accessory: K9698WH Hood, Stainless Steel + EPOXY Coating (/H8 option)
- Part/Accessory: M1100ULX Traceable Loop Calibration between Analayzer/Sensor/Cable done thru the service department(Certificate included). MUST SPECIFY ITEMS TO BE INCLUDED IN LOOP CAL IN THE ITEM NOTES.
- Part/Accessory: M1289LV Mounting Bracket with 110VAC power convert to 24VDC and P&F Hart Splitter
- Part/Accessory: 1W-86625 8447 Turb. Standard; 0.1 NTU: 1 Gallon
- Part/Accessory: 1W-86626 8448 Turb. Standard; 0.5 NTU: 1 Gallon
- Part/Accessory: 1W-86627 8449 Turb. Standard; 10 NTU: 1 Gallon
- Part/Accessory: 1W-86628 Turb. Standard; 75 NTU 1 Gallon
- Part/Accessory: K9657PW Lamp assembly
- Part/Accessory: K9657RJ Desiccant (4pcs/unit)
- Part/Accessory: M1234WS-A 4000 NTU Formazin Stock Solution; 500 ml
- Part/Accessory: M1234WT-A Filter Housing
- Part/Accessory: M1234WU-A Filter Element (Cartridge); 1 Micron (Equivalent to K9008ZD from GS sheet)
- Part/Accessory: M1234WV-A Filter Element (Cartridge); 0.2 Micron (Equivalent to K9726EH from GS sheet)
- Part/Accessory: M1234WW-A Zero Water Filter Assembly (Cartridge and Housing): 1 Micron; For Applications >2 NTU (Equivalent to K9411UA from GS sheet)
- Part/Accessory: M1234WX-A Zero Water Filter Assembly (Cartridge and Housing): 0.2 Micron; For Applications <2 NTU; Use in conjunction with 1 Micron Filter Assembly (Equivalent to K9726EF from GS sheet)
- Part/Accessory: M1234XL-A Pressurized Head Tank; Recommended for Applications <2 NTU (/D1 Equivalent to K8003WA)
- Part/Accessory: M1234YD-A Simple Head Tank; Recommended for Applications 2 - 10 NTU (/D2 Equivalent to K8003YA )
- Part/Accessory: DOCIM12D8J2ENH Instruction Manual (old part# IM12D8J2-E-H)
- Part/Accessory: DOCIM12J5B301EN Dissolved-oxygen Sensor
- Part/Accessory: DOCIM12J6K4ENH Instruction Manual (old part# IM12J6K4-E-H)
- Part/Accessory: DOCIM11M12A0101ENA ZR22P Manual (old part# IM11M12A01-01E-A)
- Part/Accessory: DOCIM11M12A0102EN Instruction Manual ZR22/ZR402 (old part# IM11M12A01-02E)
- Part/Accessory: DOCIM11M12A0104EN ZR202G Manual (old part# IM11M12A01-04E)
- Part/Accessory: DOCIM11M12D0101EN AV550G USER' MANUAL (old part# IM11M12D01-01E)
- Part/Accessory: DOCIM11M12D0151EN Model EXAxt AV550G HART Protocol
- Part/Accessory: DOCIM11M12D0161EN AV550 FIELDBUS Manual (old part# IM11M12D01-61E)
- Part/Accessory: DOCIM11M6D0301ENA Instruction manual (old part# IM11M6D03-01E-A)
- Part/Accessory: DOCIM11M6D202ENA Instruction Manual (old part# IM11M6D2-02E-A)
- Part/Accessory: DOCIM12B03D0201EN Instruction Manual (pH/ORP) For EXA PH72 (old part# IM12B03D02-01E)
- Part/Accessory: DOCIM12B07C0501EN PH450 Instruction Manual (old part# IM12B07C05-01E)
- Part/Accessory: DOCIM12B6J302ENE Instruction manual (old part# IM12B6J3-02E-E)
- Part/Accessory: DOCIM12B6J4ENA Instruction Manual (old part# IM12B6J4-E-A)
- Part/Accessory: DOCIM12B6J6ENH Instruction Manual (old part# IM12B6J6-E-H)
- Part/Accessory: DOCIM12B6K101ENE Instruction Manual (old part# IM12B6K1-01E-E)
- Part/Accessory: DOCIM12B6K201ENE Instruction Manual (old part# IM12B6K2-01E-E)
- Part/Accessory: DOCIM12B6K301ENA PR10 Manual (old part# IM12B6K3-01E-A)
- Part/Accessory: DOCIM12B6K3ENE Instruction Manual (pH/ORP) for PR20 (old part# IM12B6K3-E-E)
- Part/Accessory: DOCIM12D03D0201EN Instruction Manual (Conductivity/Resistivity) For SC72 (old part# IM12D03D02-01E)
- Part/Accessory: DOCIM12D08E0201EN Instruction Manual (old part# IM12D08E02-01E)
- Part/Accessory: DOCIM12D7J1ENH Instruction Manual (old part# IM12D7J1-E-H)
- Part/Accessory: DOCIM12D7J4ENH Instruction Manual (old part# IM12D7J4-E-H)
- Part/Accessory: DOCIM12D7K3ENE Instruction Manual (Conductivity/Resistivity) For PR4A (old part# IM12D7K3-E-E)
- Part/Accessory: M1263BX One year (12 months) extended warranty (5% of list price, not quoted or sale price)
- Part/Accessory: M1263BY Two years (24 months) extended warranty (10% of list price, not quoted or sale price)
- Part/Accessory: M1263BZ Three years (36 months) extended warranty (15% of list price, not quoted or sale price)
- Part/Accessory: M1234JL-A PH87 Instruction Manual Doc. # L2528
-
Part/Accessory: E7042UD Universal Cell Assembly Kit (For ZR22 and ZR202)
- Part/Accessories List For: MODEL ZR22S EXPLOSIONPROOF OXYGEN DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR202S EXPLOSIONPROOF OXYGEN ANALYZER DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: ANALYTICAL SPARE PARTS - OXYGEN HUMIDITY SPARE PARTS - OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR22G ZIRCONIA OXYGEN HUMIDITY ANALYZER DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR202G INTEGRAL TYPE OXYGEN/HUMIDITY ANALYZER OXYGEN HUMIDITY
-
Part/Accessory: K9477EA Flame Arrestor Replacement (For models with /FA option only)
- Part/Accessories List For: MODEL ZR22S EXPLOSIONPROOF OXYGEN DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR202S EXPLOSIONPROOF OXYGEN ANALYZER DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: ANALYTICAL SPARE PARTS - OXYGEN HUMIDITY SPARE PARTS - OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR22G ZIRCONIA OXYGEN HUMIDITY ANALYZER DETECTOR OXYGEN HUMIDITY
-
Part/Accessory: M1233SR Remote Calibration Kit with Two 103 Liter Cylinders (One 1% oxygen balance nitrogen, and one 21% oxygen balance nitrogen), Two Flow Regulators, Tygon Tubing, and a Carrying Case
- Part/Accessories List For: MODEL ZR22S EXPLOSIONPROOF OXYGEN DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR202S EXPLOSIONPROOF OXYGEN ANALYZER DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: ANALYTICAL SPARE PARTS - OXYGEN HUMIDITY SPARE PARTS - OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR22G ZIRCONIA OXYGEN HUMIDITY ANALYZER DETECTOR OXYGEN HUMIDITY
- Part/Accessories List For: MODEL ZR202G INTEGRAL TYPE OXYGEN/HUMIDITY ANALYZER OXYGEN HUMIDITY
-
Part/Accessory: K1500DV PG13.5 adaptor for F*20 (PVDF) (-SN option)
- Part/Accessories List For: pH/ORP ELECTRODES FOR FF20, FS20, AND FD20 CODE DESCRIPTIONS pH
- Part/Accessories List For: MODEL DO71 OPTICAL DISSOLVED OXYGEN SENSOR DISSOLVED OXYGEN
- Part/Accessories List For: MODEL DO72 OPTICAL DISSOLVED OXYGEN SENSOR DISSOLVED OXYGEN
- Part/Accessories List For: ANALYTICAL SPARE PARTS - pH SPARE PARTS - pH
- Part/Accessories List For: MODEL SC25V 12mm COMBINATION ELECTRODE pH
-
Part/Accessory: K1520JP PG13.5 adaptor for F*20 (SS) (-SN Option)
- Part/Accessories List For: pH/ORP ELECTRODES FOR FF20, FS20, AND FD20 CODE DESCRIPTIONS pH
- Part/Accessories List For: MODEL DO71 OPTICAL DISSOLVED OXYGEN SENSOR DISSOLVED OXYGEN
- Part/Accessories List For: MODEL DO72 OPTICAL DISSOLVED OXYGEN SENSOR DISSOLVED OXYGEN
- Part/Accessories List For: ANALYTICAL SPARE PARTS - pH SPARE PARTS - pH
- Part/Accessories List For: MODEL SC25V 12mm COMBINATION ELECTRODE pH
- Part/Accessory: K1520YA Electrolyte Reservoir for SC21-AGC55
- Part/Accessory: K1521JA For SH Option:FU24 ADAPTER PLATE
- Part/Accessory: K1521JB For SI Option: FU24 adapter plate for use with Plastic /PVDP fitting
- Part/Accessory: K1547PA Optional Hastelloy Cleaning System (HCN2 option), for F*20 holders
- Part/Accessory: S115746 For SR Option; ECP Electrode (copper), Measuring Metal
-
Part/Accessory: K1523JA Adapter for placing PG13.5 sensors in F*40 holders, Noryl Material
- Part/Accessories List For: MODEL DO71 OPTICAL DISSOLVED OXYGEN SENSOR DISSOLVED OXYGEN
- Part/Accessories List For: MODEL DO72 OPTICAL DISSOLVED OXYGEN SENSOR DISSOLVED OXYGEN
- Part/Accessories List For: ANALYTICAL SPARE PARTS - pH SPARE PARTS - pH
- Part/Accessories List For: MODEL SC25V 12mm COMBINATION ELECTRODE pH
-
Part/Accessory: K1523JC Adapter for placing PG13.5 sensors in F*40 holders, SS Material
- Part/Accessories List For: MODEL DO71 OPTICAL DISSOLVED OXYGEN SENSOR DISSOLVED OXYGEN
- Part/Accessories List For: MODEL DO72 OPTICAL DISSOLVED OXYGEN SENSOR DISSOLVED OXYGEN
- Part/Accessories List For: ANALYTICAL SPARE PARTS - pH SPARE PARTS - pH
- Part/Accessories List For: MODEL SC25V 12mm COMBINATION ELECTRODE pH
- Part/Accessory: K1531BA O-RINGS EPDM 9x1 (6 PCS) FOR OXYGEN EXCHANGE CAP
- Part/Accessory: K1531CA OXYGEN EXCHANGE CAP DO71-W
- Part/Accessory: K1531JA ADAPTER 12MM TO PG13.5 PVC FOR DO71
- Part/Accessory: K9679WA Adapter for DO71 with DOX8HS (-S3)
- Part/Accessory: K9679WB Adapter for DO71 with DOX8HS (-PP)
- Part/Accessory: K9679WC Adapter for DO71 with PB350G
- Part/Accessory: L9920BR Zero adjusting reagent (sodium sulfite Na2SO3) for dissolved oxygen zero calibration; 500 g
- Part/Accessory: K1523JB Noryl adapter to convert PG13.5 to 3/4" NPT to be used with K1598AC flow thru holder
- Part/Accessory: K1531CB OXYGEN EXCHANGE CAP DO72-W
- Part/Accessory: K1531CC OXYGEN EXCHANGE CAP DO72-T
- Part/Accessory: K9148NA Adapter for mounting PG13.5-sens, DO72 in stainless steel DOX8HS (/S3)
- Part/Accessory: K9148NB Adapter for mounting PG13.5-sens, DO72 in polypropylene DOX8HS (/PP)
- Part/Accessory: K9679CA Adapter for 12mm PG13.5 sensor to be installed into the PB350G floating ball holder
- Part/Accessory: M1289JL PG13.5 TO 3/4" NPT ADAPTER, PVDF
- Part/Accessory: K1500FR Viton O-ring (set of 5) for 1 inch adapter K1547PK
- Part/Accessory: K1500FS EPDM O-ring (set of 5) for 1 inch adapter K1547PK
- Part/Accessory: K1500FT Silicon O-ring (set of 5) for 1 inch adapter K1547PK
- Part/Accessory: K1520BF Buffer Solution Kit (4/7/9) with ionic strength 1 mol NaCl, one each 500ml bottle (For use with the FU20-FTS Sensor) (These items are no longer stocked and only have a guaranteed shelf life of 6 months from the date of shipment)
- Part/Accessory: K1520BG Buffer Solution- pH 2.0 with ionic strength 1 mol NaCl 500ml (For use with the FU20-FTS Sensor) (These items are no longer stocked and only have a guaranteed shelf life of 6 months from the date of shipment)
- Part/Accessory: K1520BH Buffer Solution- pH 4.0 with ionic strength 1 mol NaCl 500ml (For use with the FU20-FTS Sensor) (These items are no longer stocked and only have a guaranteed shelf life of 6 months from the date of shipment)
- Part/Accessory: K1520BJ Buffer Solution- pH 7.0 with ionic strength 1 mol NaCl 500ml (For use with the FU20-FTS Sensor) (These items are no longer stocked and only have a guaranteed shelf life of 6 months from the date of shipment)
- Part/Accessory: K1520BK Buffer Solution- pH 9.0 with ionic strength 1 mol NaCl 500ml (For use with the FU20-FTS Sensor) (These items are no longer stocked and only have a guaranteed shelf life of 6 months from the date of shipment)
- Part/Accessory: K1547PJ Hastelloy Cleaning System (HCNF option), for Immersion Applications
- Part/Accessory: K1547PK 1 inch NPT 316LSS Adapter (/NSS option) (Viton O-ring)
- Part/Accessory: K1547PM 1 inch NPT Titanium Adapter (/NTI option) (Viton O-ring)
- Part/Accessory: K1520ZD Plastic Nut for use on the K1547PK adapter
- Part/Accessory: K1521JD Adapter plate with cleaning hole to place FU20 sensor into Existing SS FF20- S3*
- Part/Accessory: K1521JE Adapter plate with cleaning hole to place FU20 sensor into Existing PVDF FF20-F3*
- Part/Accessory: K1521JF Adapter plate with cleaning hole to place FU20 sensor into Existing PP FF20- P3*
- Part/Accessory: K1522PS PROTECTION SLEEVE 3/4" NPT
- Part/Accessory: K1523DD Noryl Plastic FU20 Flow through adapter (Adapter for use with the FF40/FS40 holders)
-
Part/Accessory: M1263VM NIST Buffer 4.01 (1 Gallon Size) (Replaced M1263MZ)
- Part/Accessories List For: MODEL FU20 pH/ORP SENSOR pH
- Part/Accessories List For: MODEL FU24 pH/ORP SENSOR pH
- Part/Accessories List For: MODEL PR10 PR10 Retractable pH/ORP Assembly pH
- Part/Accessories List For: ANALYTICAL SPARE PARTS - pH SPARE PARTS - pH
- Part/Accessories List For: MODEL SC25V 12mm COMBINATION ELECTRODE pH
- Part/Accessories List For: MODEL AFD20 Matrix IMMERSION pH/ORP SENSOR pH
- Part/Accessories List For: MODEL PH72 PORTABLE pH / ORP METER pH & ORP Hand held
- Part/Accessories List For: MODEL AFF20 Matrix FLOW THROUGH pH/ORP SENSOR pH
- Part/Accessories List For: MODEL AFS20 Matrix ON-LINE pH/ORP SENSOR pH
-
Part/Accessory: M1263VN NIST Buffer 6.86 (1 Gallon Size) (Replaced M1263NA)
- Part/Accessories List For: MODEL FU20 pH/ORP SENSOR pH
- Part/Accessories List For: MODEL FU24 pH/ORP SENSOR pH
- Part/Accessories List For: MODEL PR10 PR10 Retractable pH/ORP Assembly pH
- Part/Accessories List For: ANALYTICAL SPARE PARTS - pH SPARE PARTS - pH
- Part/Accessories List For: MODEL SC25V 12mm COMBINATION ELECTRODE pH
- Part/Accessories List For: MODEL AFD20 Matrix IMMERSION pH/ORP SENSOR pH
- Part/Accessories List For: MODEL PH72 PORTABLE pH / ORP METER pH & ORP Hand held
- Part/Accessories List For: MODEL AFF20 Matrix FLOW THROUGH pH/ORP SENSOR pH
- Part/Accessories List For: MODEL AFS20 Matrix ON-LINE pH/ORP SENSOR pH
-
Part/Accessory: M1263VP NIST Buffer 9.18 (1 Gallon Size) (Replaced M1263NB)
- Part/Accessories List For: MODEL FU20 pH/ORP SENSOR pH
- Part/Accessories List For: MODEL FU24 pH/ORP SENSOR pH
- Part/Accessories List For: MODEL PR10 PR10 Retractable pH/ORP Assembly pH
- Part/Accessories List For: ANALYTICAL SPARE PARTS - pH SPARE PARTS - pH
- Part/Accessories List For: MODEL SC25V 12mm COMBINATION ELECTRODE pH
- Part/Accessories List For: MODEL AFD20 Matrix IMMERSION pH/ORP SENSOR pH
- Part/Accessories List For: MODEL PH72 PORTABLE pH / ORP METER pH & ORP Hand held
- Part/Accessories List For: MODEL AFF20 Matrix FLOW THROUGH pH/ORP SENSOR pH
- Part/Accessories List For: MODEL AFS20 Matrix ON-LINE pH/ORP SENSOR pH
- Part/Accessory: M1289XT STAINELESS STEEL SUBMERSIBLE SENSOR KIT FOR FU20 (Dangler)
-
Part/Accessory: K1500FX O-rings Silicone 70 29.74 x 3.53 (5)
- Part/Accessories List For: MODEL SC42 LARGE BORE CONDUCTIVITY SENSORS CONDUCTIVITY
- Part/Accessories List For: ANALYTICAL SPARE PARTS - CONDUCTIVITY SPARE PARTS - CONDUCTIVITY
- Part/Accessories List For: ANALYTICAL SPARE PARTS - pH SPARE PARTS - pH
- Part/Accessories List For: ANALYTICAL SPARE PARTS - DISSOLVED OXYGEN SPARE PARTS - DISSOLVED OXYGEN
- Part/Accessory: K1542CW PVDF Adapter 3/4 inch MNPT (/PF option) (For AD Option)
- Part/Accessory: M1132ZH Polypropylene 3/4 INCH MNPT ADAPTER
- Part/Accessory: M1133BD Stainless Steel Adapter 3/4 inch MNPT (/PS option) (For AD Option)
- Part/Accessory: M1234EQ-A STAINLESS STEEL 3/4 INCH MNPT ADAPTER
- Part/Accessory: K1520EV /FA 2 inch ,150# Flange (for CPVC only)
-
Part/Accessory: K1521AG 316SST 1 inch 150# flange adapter (/FS4 option) (Comes with 2 flanges)
- Part/Accessories List For: MODEL ISC40FF INDUCTIVE CONDUCTIVITY FLOW FITTINGS INDUCTIVE CONDUCTIVITY
- Part/Accessories List For: ANALYTICAL SPARE PARTS - pH SPARE PARTS - pH
- Part/Accessories List For: MODEL FF40 CONDUCTIVITY FLOW ASSEMBLY CONDUCTIVITY
- Part/Accessories List For: MODEL AFF20 Matrix FLOW THROUGH pH/ORP SENSOR pH
- Part/Accessory: K1521AH PVDF 1 inch 150# flange adapter (Comes with 2 flanges)
-
Part/Accessory: K1521AJ Polypropylene 1 inch 150# flange adapter (/FP4 option) (Comes with 2 flanges)
- Part/Accessories List For: MODEL ISC40FF INDUCTIVE CONDUCTIVITY FLOW FITTINGS INDUCTIVE CONDUCTIVITY
- Part/Accessories List For: ANALYTICAL SPARE PARTS - pH SPARE PARTS - pH
- Part/Accessories List For: MODEL FF40 CONDUCTIVITY FLOW ASSEMBLY CONDUCTIVITY
- Part/Accessories List For: MODEL AFF20 Matrix FLOW THROUGH pH/ORP SENSOR pH
- Part/Accessory: K1541ZU Wall/Pipe Mounting set (PP or PVDF flow fitting) (/MP option)
- Part/Accessory: K1541ZZ Wall/Pipe Mounting set (316SS flow fitting) (/MS option)
- Part/Accessory: M1289FW PVDF Adapter plate for cleaning to be used with the F*20-S23C* holder. (F*20-S22 holder and K1547PJ cleaning nozzel must be ordered separately)
- Part/Accessory: M1289GD SS Adapter plate for cleaning to be used with the F*20-S23C* holder. (F*20-S22 holder and K1547PJ cleaning nozzel must be ordered separately)
- Part/Accessory: M1289XU STAINELESS STEEL SUBMERSIBLE SENSOR KIT FOR FU24 (Dangler)
- Part/Accessory: 1W-238999-3067 EasyFerm Plus VP pH/Rx 120
- Part/Accessory: K1520LQ For use with the SC29 or SC21 Electrodes, 5 meter Pt1000 Cable (A cable must always be ordered, it no longer comes with the unit) (Not Included with Assembly)
- Part/Accessory: K1520LT For use with the SC29 or SC21 Electrodes, 10 meter Pt1000 Cable (A cable must always be ordered, it no longer comes with the unit) (Not Included with Assembly)
-
Part/Accessory: K1525AA Outer Tube
- Part/Accessories List For: MODEL PR10 PR10 Retractable pH/ORP Assembly pH
- Part/Accessories List For: MODEL PR10 PR10 RETRACTABLE ASSEMBLY INDUCTIVE CONDUCTIVITY
- Part/Accessories List For: ANALYTICAL SPARE PARTS - PR10 SPARE PARTS - PR10
- Part/Accessories List For: MODEL PR10 PR10 Retractable Assembly CONDUCTIVITY
- Part/Accessory: K1525AB Sensor Holder for PG13.5 Only. (If you are using a standard Yokogawa sensor, SC21-AAP26 for example, you also need part K1525AG)
-
Part/Accessory: K1525AF O-Ring pick-up tool for maintenance (NOT included in asssembly)
- Part/Accessories List For: MODEL PR10 PR10 Retractable pH/ORP Assembly pH
- Part/Accessories List For: MODEL PR10 PR10 RETRACTABLE ASSEMBLY INDUCTIVE CONDUCTIVITY
- Part/Accessories List For: ANALYTICAL SPARE PARTS - PR10 SPARE PARTS - PR10
- Part/Accessories List For: MODEL PR10 PR10 Retractable Assembly CONDUCTIVITY
- Part/Accessory: K1525AG PH Sensor Holder Y-cap Adapter (For use with standard Yokogawa SC21-AAP26 style probes, you also need part K1525AB)
- Part/Accessory: K1525BA O-ring set for PR10-S-V-L5-D32
-
Part/Accessory: K1525BC Key Set
- Part/Accessories List For: MODEL PR10 PR10 Retractable pH/ORP Assembly pH
- Part/Accessories List For: MODEL PR10 PR10 RETRACTABLE ASSEMBLY INDUCTIVE CONDUCTIVITY
- Part/Accessories List For: ANALYTICAL SPARE PARTS - PR10 SPARE PARTS - PR10
- Part/Accessories List For: MODEL PR10 PR10 Retractable Assembly CONDUCTIVITY
-
Part/Accessory: K1525BD Squeezing set
- Part/Accessories List For: MODEL PR10 PR10 Retractable pH/ORP Assembly pH
- Part/Accessories List For: MODEL PR10 PR10 RETRACTABLE ASSEMBLY INDUCTIVE CONDUCTIVITY
- Part/Accessories List For: ANALYTICAL SPARE PARTS - PR10 SPARE PARTS - PR10
- Part/Accessories List For: MODEL PR10 PR10 Retractable Assembly CONDUCTIVITY
- Part/Accessory: K1525BK Gaskets 1 1/4" Ball Valve K1525YK (Replaced K1525BH)
- Part/Accessory: K1525BX Outer Tube SS FU20
- Part/Accessory: K1525CB Titanium Sensor Holder for PG13.5 Only. (If you are using a standard Yokogawa sensor, SC21-AAP26 for example, you also need part K1525AG
- Part/Accessory: K1525YA Stainless steel 1.25" NPT Process adapter (/SA125 Option)
- Part/Accessory: K1525YB 316SS 1.25 Flange Adapter with drains, NO BALL VALVE INCLUDED (/FA125 option), (NEED TO ORDER BALL VALVE K1525YK)
- Part/Accessory: K1525YK 316SS Ball Valve Flanged 1.25 inch 150LBS to process (/BF125 option) (ALSO NEED TO ORDER K1525YB PROCESS ADAPTER to have completely flanged assembly)
- Part/Accessory: K1525YL 316SS Ball Valve Flanged 2.0 inch 150LBS to process (/BF200 option) (ALSO NEED TO ORDER K1525YD PROCESS ADAPTER to have completely flanged assembly)
- Part/Accessory: K1525YP PR10/BS125
- Part/Accessory: K1525YT Stainless steel 1.25" NPT Process adapter to work with the FU20 sensor (/SL125 Option)
- Part/Accessory: K1525YV Stainless steel 2" NPT Process adapter to work with the FU20 sensor (/SL200 Option)
- Part/Accessory: K1525YW 316SS 2" Flange Adapter with drains, to work with the FU20 sensor. NO BALL VALVE INCLUDED (/FL200 option)
- Part/Accessory: M1263ME Ball valve 316SS 1.25 inch FNPT Process Connection (PR10/BS125 option)
- Part/Accessory: M1263WY 1.25" FNPT Titanium Ball Valve (Replaced M1263WY-A)
- Part/Accessory: M1289UN 1.5" 150# Titanium Flange with 1.25" NPT tap
- Part/Accessory: M1289UR Titanium /TA125 Adapter (Must be ordered if selecting -T version)
- Part/Accessory: M1289WM Titanium /TA200 Adapter (Must be ordered if selecting -T version)
- Part/Accessory: PR10_0000000000026 Titanium PR10-T-V-L5-D32-FU20/TL125; Retractable to accept FU20 sensor (Replaced S200529A)
- Part/Accessory: K1500BN PH18 O-Ring EPDM For 1-1/2 inch Tri-Clamp ( /SE5 option )
- Part/Accessory: K1500BP PH18 O-Ring EPDM For 2 inch Tri-Clamp ( /SE4 option )
- Part/Accessory: K1500EQ O-ring set EPDM for FF20-S22/FS20-S22
- Part/Accessory: K1500ER O-ring set VITON for FF20-S22/FS20-S22
- Part/Accessory: K1500ES O-ring set EPDM for FF20-P33/FF20-F33 and FS20-P32/FS20-F32
- Part/Accessory: K1500ET Large Viton O-Ring for FF20-P/F33, FS20-P/F33 and PH18; NOT for FF20-S33 (old special number S82895276)
- Part/Accessory: K1500EU O-ring set EPDM for FF20-S33 and FS20-S32
- Part/Accessory: K1500EV O-ring set VITON for FF20-S33 and FS20-S32
- Part/Accessory: K1500EZ O-ring set Vition FF20-S43
- Part/Accessory: K1500FA O-ring set EPDM for FD20-P37
- Part/Accessory: K1500FB O-ring set VITON for FD20-P37 FD20-F37
- Part/Accessory: K1500FC O-ring set EPDM for FD20-P37
- Part/Accessory: K1500BV O-Rings EPDM 11x3 (6 pc.)
- Part/Accessory: K1500BW Flow Tube for Salt Bridge (SB20-VC)
- Part/Accessory: K1500BY Mounting Kit For SR20-AC52 & SR20-AS52 Electrodes
- Part/Accessory: K1500BZ o-ring set viton 11x3 (6pcs) (for the electrodes in the FF/FS/FD20 assemblies 2 per sensor.
- Part/Accessory: K1500DU Solution Ground Cable, For FF, FS and FD Assy (25 m)
- Part/Accessory: K1500FD O-ring set VITON for FD20-S37
- Part/Accessory: K1500FJ O-ring set EPDM FF20-P22/FF20-F22/FS20-P22/FS20-F22
- Part/Accessory: K1500FK O-ring set EPDM FF20-P22/FF20-F22/FS20-P22/FS20-F22
- Part/Accessory: K1500FL O-ring set Silicone FF20-P22/FF20-F22/FS20-P22/FS20-F22
- Part/Accessory: K1500FM O-ring set Silicone FF20-S22/FS20-S22
- Part/Accessory: K1500FU KCl Reservoir, with 2.5 Meters of tubing
- Part/Accessory: K1500FV Solution Ground Cable, For FF, FS and FD Assy (10 m)
- Part/Accessory: K1500GF 250 ml, 1 molal KCl Solution
- Part/Accessory: K1500GG 250 ml, 1 molal KCl Solution (High Viscosity for high temperatures)
- Part/Accessory: K1500GN O-Ring, Set (7 Pieces, Silicon) for FF20/FS20 3-Hole Stainless Steel Holders
- Part/Accessory: K1500GP O-Ring, Set (8 Pieces, Silicon) for All FF20/FS20 3-Hole Plastic Holders
- Part/Accessory: K1500GR O-Ring, Set (8 Pieces, Silicon) for All Standard Electrodes In All FF/FS/FD Assemblies
- Part/Accessory: K1500GU O-Ring, Set (10 Pieces, Silicon) for All FD20 3-Hole Plastic Holders
- Part/Accessory: K1500GW O-Ring, Set (10 Pieces, Silicon) for FD20 3-Hole Stainless Steel Holders
- Part/Accessory: K1500GZ Liquid Earth pin for Plastic holders of any FF20/FS20/FD20
- Part/Accessory: K1500HA Claibration dishes for FF20-*33 (qty 50)
- Part/Accessory: K1500HC Rubber Spacer Set (2 pieces) for FP20-S13 (Bellowmatic Holder)
- Part/Accessory: K1520VA 3.3 Molar KCl Refill Solution (250 ml Bottle)
- Part/Accessory: K1520VN 250 ml, 3.3 molal KCl Solution (High Viscosity)
- Part/Accessory: K1547PP Spray cleaner replacement rupper tips (5)
- Part/Accessory: K1521AD 1/2" ANSI 150 LB AISI316 flange adapter (/FS3 option) (Comes with 2 flanges)
- Part/Accessory: K1521AE 1/2" 150# ANSI; PVDF Lap Joint Flange Kit for (/FF3 option) (Comes with 2 flanges)
- Part/Accessory: K1521AF 1/2" ANSI 150 LB AISI Pollypro flange adapter (/FP3 option) (Comes with 2 flanges)
- Part/Accessory: M1200HQ NIST Buffer 4.01 (5 Gallon Size)
- Part/Accessory: M1200HR NIST Buffer 6.86 (5 Gallon Size)
- Part/Accessory: M1200HS NIST Buffer 9.18 (5 Gallon Size)
- Part/Accessory: M1132RN 0-5 GPH Rotometer for use with FF20
- Part/Accessory: M1263XZ PH18 Internal O-Ring Viton A 25.0 x 1.5 (QTY 1) (Replaces K1500BS)
- Part/Accessory: M1263YA PH18 O-Ring EPDM 17.0 x 3.0 (QTY 1) (Repleaced K1522FK)
- Part/Accessory: M1263YB PH18.O-Ring FDA-Approved EPDM 20.0 x 2.5 (QTY1) (Replaced K1500BJ)
- Part/Accessory: M1263YC PH18 O-Ring FDA- Approved EPDM 17.0 x 2.5 (QTY 1) (Replaces K1500BR)
- Part/Accessory: M1263YE PH18.O-Ring Kalrez 6375; 25.0 x 1.5 (QTY 1)
- Part/Accessory: M1263YF PH18.O-Ring Kalrez 6375; 17.0 x 3.0 (QTY 1)
- Part/Accessory: M1263YG PH18.O-Ring Kalrez 6375; 20.0 x 2.5 (QTY1)
- Part/Accessory: M1263YH PH18.O-Ring Kalrez 6375; 17.0 x 2.5 (QTY 1)
- Part/Accessory: S115746A For SW Option; ECP Electrode (brass), Measuring Metal
- Part/Accessory: S115746B For SX Option; ECP Electrode (steel), Measuring Metal
- Part/Accessory: 93034 Soft Case (Replaces B9269KJ)
- Part/Accessory: A1112EF Fuse
- Part/Accessory: B1013ER Small O-Ring for Gas Tubing (Qty 2 Needed)
- Part/Accessory: B1014ER Large O-Ring for Gas Tubing (Qty 2 Needed)
- Part/Accessory: E7042AY Filter Screen
- Part/Accessory: E7042BR Cell Front Plate
- Part/Accessory: E7042BS Contact Spring
- Part/Accessory: E7042UQ Dust Filter for Oil/Gas Applications (K9471UA)
- Part/Accessory: G7129YC Bolt (30 mm) for E7042UQ (Qty of 1)
- Part/Accessory: K9119EN Cell Parts Kit (without Cell)
- Part/Accessory: K9470BA Heater Strut Retention Screw
- Part/Accessory: K9470BG ZR22 Cold Junction (RTD PT1000)
- Part/Accessory: K9470BJ Metal O-Ring for Cell Assembly (Single Use)
- Part/Accessory: K9470BM Calibration J-Tube
- Part/Accessory: K9475GA Display
- Part/Accessory: K9475JA Control Card (Hart)
- Part/Accessory: K9475PA Base Power Unit with Dry Outputs
- Part/Accessory: K9475PB Base Power Unit with 24V Outputs
- Part/Accessory: K9475RA Extension Power Unit with Dry Outputs
- Part/Accessory: K9475RB Extension Power Unit with 24V Outputs
- Part/Accessory: M1133BZ 8 Channel Manifold
- Part/Accessory: M1133EC Heater Band
- Part/Accessory: M1133EH Solenoid Valve NO
- Part/Accessory: M1133EJ Solenoid Valve NC
- Part/Accessory: M1133ET Blowback Ball Valve and Actuator
- Part/Accessory: M1133FS Pressure Switch
- Part/Accessory: M1133FT Gasket (JIS 5K32A)
- Part/Accessory: M1200DB-06 High Temperature Fly-Ash Filter for ZR22/ZR202 (K9471UC)
- Part/Accessory: M1200DF Washers (Qty of 1) S.S washer for cell
- Part/Accessory: M1133HR Muffler
- Part/Accessory: M1132BS Vortex Cooler
- Part/Accessory: M1132CC 0-1 LPM air flow meter with brass fitting for reference and calibration gas
- Part/Accessory: M1132GK Needle Valve
- Part/Accessory: M1132GM 3- way gas solenoid for calibration gas selection
- Part/Accessory: M1132GP 2-way gas solenoid
- Part/Accessory: M1132HG Fuse (1Amp) (Package of 5)
- Part/Accessory: M1132KD Pressure Regulator
- Part/Accessory: M1132KE Eductor Assembly includes Eductor, Regulator, and Gauge
- Part/Accessory: M1132LL Support Clamp for ZR22G for retrofit
- Part/Accessory: M1132ME Reference Air Gauge 0-60 psi
- Part/Accessory: M1132PB 3-Way Block Manifold and Solenoids (for the AC1)
- Part/Accessory: M1132ZC 0-1 LPM Air Flow Meter SS Fitting for Reference and Calibration Gas
- Part/Accessory: M1132ZX Dual Stage Regulator for Zero Gas Cylinders
- Part/Accessory: M1133AL Flex Adapter
- Part/Accessory: M1133AR Zero Gas Pressure Switch
- Part/Accessory: M1133BY 4 Channel Manifold
- Part/Accessory: M1233SL Span Gas 103 Liter For M1233SR
- Part/Accessory: M1233SM Zero Gas 103 Liter For M1233SR (1.0% O2)
- Part/Accessory: M1233SS Regulator 0.6 LPM (For M1233SL or M1233SM)
- Part/Accessory: M1234DK Hastaloy Bolt (Qty of 1) for O2 cell
- Part/Accessory: M1234VV-A Check Valve
- Part/Accessory: M1234WR-A Teflon Eductor
- Part/Accessory: M1234HD-A ZR22 Assembly Tool (Replaced K9470BX)
- Part/Accessory: M1234HL AC1 Conversion Kit for Use with ZR402
- Part/Accessory: M1234XE-A Eductor, Stainless Steel (Replaced M1132KA)
- Part/Accessory: M1234PT-A 7-Pin Terminal Box Connector (-Q option)
- Part/Accessory: M1234PU-A 3-Pin Terminal Box Connector (-Q option)
- Part/Accessory: M1234SE-A Self-Cleaning High Temperature Fly-Ash Filter for ZR22/ZR202 (K9471UC)
- Part/Accessory: M1263CB-A Installation parts for O2 cell includes bolts (4), washers (4), plate (1), j-tube (1)
- Part/Accessory: M1263CN-A Quick Disconnect Kit for WZ-H High Temp Cables; CANNOT be used for ex-proof applications
- Part/Accessory: K1525AP Adapter SC4A-ISC40
- Part/Accessory: K1525BB O-ring set for PR10-S-V-L5-D50
- Part/Accessory: K1525BJ Gaskets 2" Ball Valve K1525YL (Replaced K1525BG)
- Part/Accessory: K1525CP Titanium Sensor Adapter for SC4A-ISC40
- Part/Accessory: K1525YD 316SS 2.0 Flange Adapter with drains, NO BALL VALVE INCLUDED (/FA200 option), (NEED TO ORDER K1525YL AS WELL TO HAVE BALL VALVE)
- Part/Accessory: K1541EM Stainless Steel 2 in NPT ptocess adapter (/SA200 option)
- Part/Accessory: M1263MD Ball valve 316SS 2.0 inch FNPT Process Connection (/BS200 option)
- Part/Accessory: K1525YU 316SS 1.25" Flange Adapter with drains, to work with the FU20 sensor. NO BALL VALVE INCLUDED (/FL125 option)
- Part/Accessory: K8000PQ Wall mounting Bracket for ZR402G replacement (/BR option)
- Part/Accessory: K8008AW 1m Oscillator Cable
- Part/Accessory: K8008AX 5m Oscillator Cable
- Part/Accessory: K8008AY 10m Oscillator Cable
- Part/Accessory: K8008AZ 15m Oscillator Cable
- Part/Accessory: K8008BW 1m Power Cable
- Part/Accessory: K8008BX 5m Power Cable
- Part/Accessory: K8008BY 10m Power Cable
- Part/Accessory: K8008BZ 15m Power Cable
-
Part/Accessory: K9171SS Universal Pipe/Wall Mounting Hardware (/U option) For the GD402G or EXA200 /202 (Replaced EXA/U) or the EXA400/402/450 series. Will also work on the FLXA series.
- Part/Accessories List For: ANALYTICAL SPARE PARTS - EXA SPARE PARTS - EXA
- Part/Accessories List For: ANALYTICAL SPARE PARTS - FLXA SPARE PARTS - FLXA21/202
- Part/Accessories List For: MODEL FLXA402T Turbidity and Chlorine Analyzer Liquid Analyzer
- Part/Accessories List For: MODEL GD402G/GD402T/GD402V GAS DENSITY CONVERTER DENSITY
- Part/Accessories List For: MODEL FLXA402 4-Wire Analyzer 4-Wire Analyzer
- Part/Accessory: K9171ST Panel Mounting Hardware for the EXA400/402/450 series (/PM option) and the GD402G (/PA option)
- Part/Accessory: K9315CA Cover/Window Assembly for EXA200/202 (Replaces K1542JZ)
- Part/Accessory: K9660JA Sun Hood (For Direct Sunlight) (Replaced K1542KG)
- Part/Accessory: K9676BA Hood Asssembly for the 450's
- Part/Accessory: K9676BU Cable Gland Set for Any EXA 400/402/450 (replaced K1500AU)
- Part/Accessory: L9811FV Cable Gland Set For EXA 200/202 (one gland, including seal and backing nut) (Replaced K1500AU)
- Part/Accessory: M1263CX-A Fieldbus connector (/T option)
- Part/Accessory: K9698WD 4 pieces of 1/2" NPT Conduit Adapters (/CD4 option) (THIS ITEM IS NOT STOCK AND HAS LONGER LEAD TIME CONSULT FACTORY)
- Part/Accessory: K9703ZD Panel Mounting Hardware (/PM option); replaced K9698ZD
- Part/Accessory: M1263ZX FLXA202 Panel Mounting Bracket Replacing EXA200 and 202s
- Part/Accessory: K9698WK Hood (Stainless steel) (/H6 option)
- Part/Accessory: K9698WL SS Hood (urethane coating) (/H7 Option)
- Part/Accessory: K9703WG Conduit adapter 1/2NPT x 4pcs (/CD4 Option)
- Part/Accessory: K9703WK Conduit adapter 1/2NPTx3pcs+Ethernetx1pc (/CD6 Option)
- Part/Accessory: K9145ZF Adapter to place FU20 into PB350G (SS Material)
- Part/Accessory: K9145ZG Adapter to place FU20 into PB350G (Titanium Material)
- Part/Accessory: K9145ZH Adapter to place FU20 into PB350G (Hastelloy-C Material)
- Part/Accessory: 1W-2-061-34-004 Insertion rod RF20H 2.4602 / Alloy C22 (EXtract 810)
- Part/Accessory: 1W-2-086-32-001 Set blind plug G1/8 1.4301/316 for cleaning chamber
- Part/Accessory: 1W-2-086-34-001 Set blind plug G1/8" 2.4602/C22 for cleaning chamber
- Part/Accessory: 1W-242565 BLIND PLUG 1.4435-25mm OP sealing location
- Part/Accessory: 1W-242576 SAFETY SOCKET 1.4435-15-25mm OP sealing location
- Part/Accessory: 1W-243590-1211 CONDUCELL 4USF-PG-120 (Replaced 1W-237620); 0.36/cm cell constant; measuring range 1 uS/cm to 500 mS/cm
- Part/Accessory: 1W-237700-25 CONDUCELL 4US-G125-62/25 (25mm PORT; Pt1000 RTD; 5M CABLE) 4-Electrode Sensor; 0.147/cm cell constant; measuring range 0.1 uS/cm to 500 mS/cm
- Part/Accessory: 1W-237750 CONDUCELL 4US-T150-50 (1.5" TRI-CLAMP; Pt1000 RTD; 5M CABLE) 4-Electrode Sensor; 0.147/cm cell constant; measuring range 0.1 uS/cm to 500 mS/cm
- Part/Accessory: 1W-238926 Conductivity Standard 5 µS/cm, 1%, 300 ml, Accred.
- Part/Accessory: 1W-238928 Conductivity Standard 1413 µS/cm, 1%, 300 ml, Accred.
- Part/Accessory: 1W-238934 100 microSiemen/cm Standard; 300ml; Lab Glass Container
- Part/Accessory: 1W-238973 1.3 microSiemen/cm Standard; 300ml (USP Requirements); Lab Glass Container
- Part/Accessory: 1W-238986 Basic Line Conductivity Std 1413µS/cm, 1%, Plastic Bottle 500 ml, Accred.
- Part/Accessory: 1W-238988 Basic Line Conductivity Std 12880µS/cm, 1%, Plastic Bottle 500 ml, Accred.
- Part/Accessory: M1289DQ SS retractable with modified sensor tip to work with the PG13.5 Conducell 237620. (Does not include the ball valve. Must be ordered separately)
- Part/Accessory: DOCIM11T03E0101EN Gas Density Analyzer Instruction Manual (old part# IM11T3E1-01E)
- Part/Accessory: M1233ZR-02 Filter for M1133ZR-0
- Part/Accessory: M1234TT-A 1/2 Inch Conduit Union kit (6 ea)
- Part/Accessory: M1234SG-A 1/2 Inch Conduit Union
- Part/Accessory: K1500AL Stainless Steel Mounting Nut (3 pieces)
- Part/Accessory: K1500AM Viton Gasket (used under mounting nut)
- Part/Accessory: K1541ZS Viton O-Ring set for ISC40FD-V (5 pieces)
- Part/Accessory: K1500CA ISC40 Sensor Flange Mounting O-Ring (5 Kits of 2 EPDM O-Rings) Set For Options / FFJ/FSJ/PFJ/PSG/SFA/SFD/SSG/SFJ
- Part/Accessory: K1500CB ISC40 Sensor O-Ring (5 Kits of 2 Viton O-Rings) Set For Options / FFJ/FSJ/PFJ/PSG/SFA/SFD/SSG/SFJ
- Part/Accessory: K1500CC ISC40 Sensor Flange Mounting O-Ring (5 Kits of 2 Silicone O-Rings) Set For Options / FFJ/FSJ/PFJ/PSG/SFA/SFD/SSG/SFJ
- Part/Accessory: K1500CD ISC40 Mounting O-Ring Kalrez (QTY of 1) 40.64 * 5.33 for Assemblies: {ISC40FF-S stainless and ISC40FF-F and ISC40FF-P plastics} ISC40 sensor FFJ/FSJ/PFJ/PSG/SFA/SFD/SSG options}; {ISC40FS for /SCSJ/SCSA/SCWN and /PSCJ/PCSA/FCSJ/FSCA}
- Part/Accessory: K1500CE EPDM, 5 sets of 2 o-rings sizes needed for R/M1289HH and R/M1289HJ Adapter; or locally made M# Flanges (i.e. M1289DC)
- Part/Accessory: K1500CF Viton, 5 sets of 2 o-rings sizes needed for R/M1289HH and R/M1289HJ Adapter; or locally made M# Flanges (i.e. M1289DC)
- Part/Accessory: K1500CG Silicon, 5 sets of 2 o-rings sizes needed for R/M1289HH and R/M1289HJ Adapter; or locally made M# Flanges (i.e. M1289DC)
- Part/Accessory: K1500CH alrez O-ring #1 for R/M1289HH and R/M1289HJ Adapter; or locally made M# Flanges (i.e. M1289DC) Also need K1500CV
- Part/Accessory: K1500CM ISC40 5 Sets of 2 EPDM O-Rings (/SFT option)
- Part/Accessory: K1500CP ISC40 5 Viton O-Rings (/STC1 option)
- Part/Accessory: K1500CQ ISC40 5 EPDM O-Rings (/STC1 option)
- Part/Accessory: K1500CR ISC40 5 Silicone O-Rings (/STC1 option)
- Part/Accessory: K1500CS ISC40 5 Sets of 2 Viton O-Rings(/STC2 option)
- Part/Accessory: K1500CT ISC40 5 Sets of 2 EPDM O-Rings(/STC2 option)
- Part/Accessory: K1500CU ISC40 5 Sets of 2 Silicone O-Rings (STC2 option)
- Part/Accessory: K1500CV Kalrez O-ring #2 for R/M1289HH and R/M1289HJ Adapter; or locally made M# Flanges (i.e. M1289DC) Also need K1500CH
- Part/Accessory: K1500CW ISC40 5 Sets of 3 Viton O-Rings (for ISC40FD-V)
- Part/Accessory: K1500CX ISC40 5 Sets of 3 EPDM O-Rings (for ISC40FD-V)
- Part/Accessory: K1500CY ISC40 5 Sets of 3 Silicone O-Rings (for ISC40FD-V)
- Part/Accessory: K1500DA ISC40 5 Sets of 3 Vition O-Rings (for ISC40FS/SCSJ/SCSA/SCWN) (for ISC40FF-S)
- Part/Accessory: K1500DB ISC40 5 Sets of 3 EPDM O-Rings (for ISC40FS/SCSJ/SCSA/SCWN) (for ISC40FF-S)
- Part/Accessory: K1500DC ISC40 5 Sets of 3 Silicone O-Rings ((for ISC40FS/SCSJ/SCSA/SCWN) (for ISC40FF-S)
- Part/Accessory: K1500DD ISC40 53.34 * 5.33 Kalrez O- Ring (for ISC40FS/SCSJ/SCSA/SCWN) (for ISC40FF-S)
- Part/Accessory: K1500DE ISC40 5 Sets of 3 Viton O-Rings (for ISC40FS/PSCJ/PCSA/FCSJ/FSCA) (for ISC40FF-F and ISC40FF-P)
- Part/Accessory: K1500DF ISC40 5 Sets of 3 EPDM O-Rings (for ISC40FS/PSCJ/PCSA/FCSJ/FSCA) (for ISC40FF-F and ISC40FF-P)
- Part/Accessory: K1500DG ISC40 5 Sets of 3 Silicone O-Rings (for ISC40FS/PSCJ/PCSA/FCSJ/FSCA) (for ISC40FF-F and ISC40FF-P)
- Part/Accessory: K1500DJ ISC40 2 Sets of 3 Viton O-Rings (for ISC40FS/S2WN)
- Part/Accessory: K1500DK ISC40 2 Sets of 3 Silicone O-Rings (for ISC40FS/S2WN)
- Part/Accessory: K1500DT ISC40 5 Sets of 2 Silicone O-Rings (for protection hose)
- Part/Accessory: K1541ZG Sanitary 2.0 inch Tri-Clamp (STC1/Option) (For -GS)
- Part/Accessory: K1541ZH ISC40. 2 Sets of 3 EPDM O-Rings (for ISC40FS/S2WN)
- Part/Accessory: K1541ZK ISC40. 2 Sets of 3 EPDM O-Rings (for ISC40FS/STWN)
- Part/Accessory: K1541ZM ISC40. O-Ring Set for IC40FS-PCS/FCS & IC40FF-P/F Assemblies (5 Pieces)
- Part/Accessory: K1541ZR 2.0 inch 150# Flange Adapter in A1S1 316 Stainless Steel (/SFA Option) (For -GG)
- Part/Accessory: K1541ZY ISC40FD Pipe Mounting Hardware (/MS1) For All ISC40FDs
- Part/Accessory: M1289LB 316 SS Tri-Clamp 2.0 inch (for -SC sensor) (Replaces K1542FE)
- Part/Accessory: M1293HL Kalrez O-ring #2 (39.34mm x 2.62mm) for R/M1289HH and R/M1289HJ Adapter; or locally made M# Flanges (i.e. M1289DC) Also need M1293HM (Replaced K1500CV)
- Part/Accessory: M1293HM Kalrez O-ring #1 (26.57mm x 3.53mm) for R/M1289HH and R/M1289HJ Adapter; or locally made M# Flanges (i.e. M1289DC) Also need M1293HL (Replaced K1500CH)
- Part/Accessory: K1500AV O-Ring Set (5 Pieces Silicone) PB30 Floating Ball
- Part/Accessory: K1500AZ Nozzle Parts For DO Jet Cleaner
- Part/Accessory: K1500FY O-rings 37.77X2.62 Set (5 pieces, Silicon) For Mounting the DO30 Sensor in FD30 Immersion Holder
- Part/Accessory: K1530DQ Galvanized Steel Surface/Pipe Mounting Bracket for PB30 DO Floating Ball
- Part/Accessory: K1530UK Plastic Spray Nozzle Kit For DO Jet Cleaner. Used with FD30
- Part/Accessory: K1530UL Plastic 1/4” Tubing For DO Jet Cleaner .Used with FD30, 10 Meters
- Part/Accessory: K1530YZ DO Jet Cleaner (/JC)
- Part/Accessory: K9088PE Polisher for polishing silver electrode of the DO30G
- Part/Accessory: K9171DN 50 ml of electrolyte for DO30G sensor
- Part/Accessory: K9171HK 3 sets Diaphragm Kit (50µm), Electrolyte, syringe/Needle for DO30G Sensor (this is the replacement part number for K1530UH once stock is gone)
- Part/Accessory: K1500EG Mounting clampset for FF40-S22
- Part/Accessory: K1500EH Mounting clamp for FF40-P/V22
- Part/Accessory: K1500HF DN100 t-piece, from Europe, for use with the ISC40G(S)-TG Sensor Only (We do not keep stock, so it will always have a longer lead time consult factory)
- Part/Accessory: K1500HG DN80 t-piece, from Europe, for use with the ISC40G(S)-TG Sensor Only (We do not keep stock, so it will always have a longer lead time consult factory)
- Part/Accessory: K1541GX DN60 PIN10 Mounting flange for use with the K1500HF, K1500HG tee, instead of customer supplying blind flange. (Longer lead time as we do not keep stock) Only for use with ISC40*-TG
- Part/Accessory: K1541KB /STW options on the ISC40G(S)-GG sensor, 3" tir-clamp fitting (Longer lead time as we do not keep stock)
- Part/Accessory: K1541XF Sealing Ring with SS DN65 PN10 flange (/TFD option) (For -TG)
- Part/Accessory: K1541XG Sealing Ring (/TFN option) (For -TG); Sealing ring should be replaced each time the -TG sensor is replaced to prevent processleakage
- Part/Accessory: K1541ZP /SFT1 option on the ISC40G(S)-GS sensor, Tuchenhagen Sanitary Fitting
- Part/Accessory: M1234VN-A 3"" 150# 316 SS flanged t-piece, for use with the ISC40G(S)-TG Sensor Only (We do not keep stock, longer lead time Consult factory)
- Part/Accessory: M1263BQ-A 3" 150# process flange, with a 2" sensor connection flange, carbon steel PFA lined t-piece,(We do not keep stock, longer lead time Consult factory) For use with ISC40 G(S) -TG only
- Part/Accessory: M1289DC 2.0 Inch 150# flange adapter in PVDF (For -*G sensor), Requires O-ring Kit ordered separately (i.e. K1500CE)
- Part/Accessory: M1289DS 3.0 Inch 150# flange adapter in SS (For -*G sensor), Requires O-ring Kit ordered separately (i.e. K1500CE)
- Part/Accessory: M1289DT 4.0 Inch 150# flange adapter in SS (For -*G sensor), Requires O-ring Kit ordered separately (i.e. K1500CE)
- Part/Accessory: M1289EH 2.0 Inch 150# flange adapter in SS (For -*G sensor), Requires O-ring Kit ordered separately (i.e. K1500CE)
- Part/Accessory: M1289JX 2.5 Inch 150# flange adapter in SS (For -*G sensor), Requires O-ring Kit ordered separately (i.e. K1500CE)
- Part/Accessory: M1293HV SUBMERSIBLE ADAPTER ASSEMBLY, ISC40G (must also purchase R/M1289HH)
- Part/Accessory: K1500CJ Protection Hose Kit; 5 meter length
- Part/Accessory: K1500CK Protection Hose Kit; 10 meter length
- Part/Accessory: M1233ZP Pressure Regulator on the M1233ZM Sample Panel
- Part/Accessory: M1233ZR-0 Coalescing Filter Assembly for M1233ZA
- Part/Accessory: M1234TV-A PVDF inner coupling (21" insertion Length)
- Part/Accessory: M1234DQ PVDF inner coupling (7" insertion Length) (Standard on the holder)
- Part/Accessory: M1234DS O-Rings (Viton)
- Part/Accessory: M1234DT Compression Fitting
- Part/Accessory: M1234DY Titanium Swagebody
- Part/Accessory: M1234EA Titanium sheath (7" insertion Length) (Standard on the holder)
- Part/Accessory: M1234EC 1.25" FNPT 316L SS Ball Valve (If you forgot to order the /B)
- Part/Accessory: M1234EE Jbox on the PH87
- Part/Accessory: M1234WZ-A Reducing Bushing 1"x 1.25", titanium
- Part/Accessory: M1234XA-A 1.25" Nipple, titanium
- Part/Accessory: M1234JQ-A Titanium sheath (21" insertion Length)
- Part/Accessory: M1234TE-A 1.5" PVDF Ball Valve
- Part/Accessory: M1234TF-A Reducing Bushing 1"X1.5": PVDF
- Part/Accessory: M1234TG-A 1.5" Nipple: PVDF
- Part/Accessory: M1263AR-A 1.5" FNPT Titanium Ball Valve
- Part/Accessory: M1263AS-A Reducing Hexbushing 1"X1.5": titanium
- Part/Accessory: M1263AT-A 1.5" Nipple, Titanium
- Part/Accessory: M1263BA-A 1.5" FNPT Hastelloy C Ball Valve
- Part/Accessory: 1W-242411 USB-ModBus RS485 Converter used for VisiWater Calibrations. External 24 VDC (i.e. AAK Corp CM24.1) power must be used to power the sensor.
- Part/Accessory: 1W-243490-01 ARC Calibration USB and Power Cable device for VP Arc Sensors (VisiFerm).
- Part/Accessory: 1W-243499 Wireless ARC Calibration USB Converter with Blue Tooth for use with VisiTrace; Also need 1W-355288 M12 Power Cable
- Part/Accessory: 1W-243505 VisiFerm H2 cap with additional PTFE layer and hygenic design for rather demanding applications (replaced 1W-243510)
- Part/Accessory: 1W-243515 VisiFerm Standard Sensor Replacement H0 Cap (replaces 1W-242427 P0 Cap)
- Part/Accessory: 1W-243530 VisiTrace Replacement ODO Cap L0
- Part/Accessory: 1W-243575 Calibration Stand for Optical Do sensors. Allows for connection of gases to do Zero (air) and span
- Part/Accessory: 1W-243650 VisiWater Optical DO 120mm with 10M integral cable for wastewater apps. Standalone 4-20mA device.
- Part/Accessory: 1W-243666-211 VisiFerm Optical DO 120 mm VP ECS mode for use with transmitter (replaces 1W-242450-02)
- Part/Accessory: 1W-243666-231 VisiFerm Optical DO 225 mm VP ECS mode for use with transmitter (replaces 1W-242452-02) ** see notes
- Part/Accessory: 1W-355218 3 Meter VP8 Cable for use with VIsiFerm
- Part/Accessory: 1W-355219 5 Meter VP8 Cable for use with VIsiFerm
- Part/Accessory: 1W-355220 10 Meter VP8 Cable for use with VIsiFerm
- Part/Accessory: 1W-355283 M12 Sensor Cable 3M for VisiTrace
- Part/Accessory: 1W-237118 OXYLYTE ELECTROLYTE (For OXYFERM) (30 ml bottle)(Due to new HAZCOM rules the volume was changed from 50 ml to 30ml)
- Part/Accessory: 1W-237123 OXYFERM MEMBRANE KIT (KIT OF 3)(No electrolyte is included)
- Part/Accessory: 1W-237135 OXYGOLD G MEMBRANE KIT (KIT OF 3)(No electrolyte is included)
- Part/Accessory: 1W-237139 OXYLYTE G ELECTROLYTE (For OXYGOLD G) (30 ml bottle)(Due to new HAZCOM rules the volume was changed from 50 ml to 30ml)
- Part/Accessory: 1W-237150 Oxysens;Maint.free sensor with 5M integral cable for immersion application must also purchase 237158
- Part/Accessory: 1W-237158 Immersion Set for use with 237150
- Part/Accessory: 1W-237350 Polarization Module for OXYFERM VP and OXYGOLD G
- Part/Accessory: 1W-237395 OXYGOLD G 120 VP (For Power-Plant ppb DO applications)
- Part/Accessory: 1W-10068709-1111 VisiTrace Optical DO 120 mm VP for low ppb ranges (standalone 4-20 mA 2-wire device); replaced 1W-243560
- Part/Accessory: 1W-237540 OXYFERM FDA VP 120 (Replaces 1W-237400)
- Part/Accessory: 1W-355284 M12 Sensor Cable 5Mfor VisiTrace
- Part/Accessory: 1W-355285 M12 Sensor Cable 10M for VisiTrace
- Part/Accessory: 1W-355288 M12 Calibration Cable with Power for use with VisiTrace; Also need 1W-243499 for calibration
- Part/Accessory: A1624EF Fuse for Sensor Control Unit (SCU)
- Part/Accessory: A1633EF Replacement Fuse
- Part/Accessory: K8003DN LED for TB820D-NT (red light)
- Part/Accessory: K8003DP LED for TB820D-FN (Infrared light)
- Part/Accessory: B1005AC Coupling
- Part/Accessory: K8005JB Measurement Electrode for -F*
- Part/Accessory: K8005JC Measurement Electrode
- Part/Accessory: K8005LB Driven Shaft Assembly
- Part/Accessory: K8005LC Motor
- Part/Accessory: K8005LP Pipe mounting hardware for FC800D (/U option)
- Part/Accessory: K8005LQ Integral bracket set for FC800D (/V option)
- Part/Accessory: K8005UC Reference Electrode
- Part/Accessory: K9332SR Rotating contact
- Part/Accessory: K9332ZJ Glass Beads for use with -C1 Electrode (2 bags)
- Part/Accessory: K9332ZP Ceramic Beads for use with -F* Electrodes (2 bags)
- Part/Accessory: K9726EG Filter Assembly for zero calibration (includes activated charcoal filter and filter case)
- Part/Accessory: L9862AY Activated Charcoal Filter
- Part/Accessory: Y9115XB O-RING
- Part/Accessory: K1548PQ /UM UNIVERSAL MOUNTING FOR SA11
- Part/Accessory: M1289LK 1 inch Tri-Clamp, 316ss (for -SB sensor) (Replaces K1542FC)
- Part/Accessory: M1289LP 1 1/2 inch Tri-Clamp, 316ss (for -SB sensor)(Replaces K1542FF)
- Part/Accessory: K9171CH Box nut (replaced K1530DD)
- Part/Accessory: K9142QV Sensor Retaining O-ring for DOX8HS
- Part/Accessory: K9643KB Aspirator Kit; 1/4" NPT
- Part/Accessory: K9643KC Panel Mounting Kit
- Part/Accessory: K9643KG Sensor Assembly (With o-ring)
- Part/Accessory: K9643KJ Activated Carbon Filter Assembly (Replaced K9643KE)
- Part/Accessory: K9643KL Activated Carbon Filter Element (QTY of 5) (Replaced K9643KF)
- Part/Accessory: M1263HV Flow indicator
- Part/Accessory: M1263HW Cooler Gasket
- Part/Accessory: M1263HX Pressure Gague
- Part/Accessory: M1263HY Pressure Reducer
- Part/Accessory: M1263HZ Sample Cooler
- Part/Accessory: M1263JA Coolant Inlet Valve
- Part/Accessory: M1263JB Coolant Relieft Valve
- Part/Accessory: M1293FQ Pressure Reducer for Hightemp/ High pressure panel (Replaces M1263VL)
- Part/Accessory: M1132ZA Alumina Ceramic, Length 0.3 Meter (1') Weight 1.2 lbs. (0.5 kg) Maximum. Temp.3400ºF (1871ºC)
- Part/Accessory: M1132ZA-02 Alumina Ceramic, Length 0.5 Meter (1'8") Weight 2 lbs. (0.9 kg) Maximum. Temp.3400ºF (1871ºC)
- Part/Accessory: M1132ZA-03 Alumina Ceramic, Length 1.0 Meter (3'3") Weight 5 lbs. (2.3 kg) Maximum. Temp.3400ºF (1871ºC)
- Part/Accessory: M1132ZA-04 Alumina Ceramic, Length 1.5 Meters (4'11") Weight 7 lbs. (3.2 kg) Maximum. Temp.3400ºF (1871ºC))
- Part/Accessory: M1263EC 310 S Stainless Steel, Length 0.3 Meter (1') Weight 1.5 lbs. (0.7 kg) Maximum. Temp.1980ºF (1082ºC) (Replaces E7046AP-J01)
- Part/Accessory: M1263ED 310 S Stainless Steel, Length 0.5 Meter (1'8") Weight 2.2 lbs. (1.0 kg) Ma, Temp.1980ºF (1082ºC) (Replaces E7046AP-J02)
- Part/Accessory: M1263EE 310 S Stainless Steel, Length 1.0 Meter (3'3") Weight 6 lbs. (2.7 kg) Ma, Temp.1980ºF (1082ºC) (Replaced E7046AP-J03)
- Part/Accessory: M1263EF 310 S Stainless Steel, Length 1.5 Meters (4'11") Weight 8 lbs. (3.6 kg) Ma, Temp.1980ºF (1082ºC) (Replaces E7046AP-J04)
- Part/Accessory: M1263EG 310 S Stainless Steel, Length 3.0 Meters (9'10") Weight 12.6 lbs. (5.7 kg) Ma, Temp.1980ºF (1082ºC) (Replaces E7046AP-J05)
- Part/Accessory: M1263GM Silicon Carbide, Length 0.3 Meter (1') Weight 2 lbs. (0.9 kg) Maximum Temp.2600ºF (1427ºC) (Replaces E7046AL-J01)
- Part/Accessory: M1263GN Silicon Carbide, Length 0.5 Meter (1'8") Weight 2.4 lbs. (1.0 kg) Maximum Temp.2600ºF (1427ºC) (Replaces E7046AL-J02)
- Part/Accessory: M1263GP Silicon Carbide, Length 1.0 Meter (3'3") Weight 5 lbs. (2.3 kg) Maximum Temp.2600ºF (1427ºC) (Replaces E7046AL-J03)
- Part/Accessory: M1263GQ Silicon Carbide, Length 1.5 Meters (4'11") Weight 7 lbs. (3.2 kg) Maximum Temp.2600ºF (1427ºC) (Replaces E7046AL-J04)
- Part/Accessory: M1133BE 1000' Spool of 6S Signal Cable (Unfinished)
- Part/Accessory: M1133BG 1000' Spool of 3H Heater Cable (Unfinished)
-
Part/Accessory: WU10-V-D-02 Universal sensor cable WU10-V-D-02
- Part/Accessories List For: MODEL 820M EXtract Manual Retractable Holder pH
- Part/Accessories List For: MODEL DO72 OPTICAL DISSOLVED OXYGEN SENSOR DISSOLVED OXYGEN
- Part/Accessories List For: MODEL FU20 pH/ORP SENSOR pH
- Part/Accessories List For: MODEL FU24 pH/ORP SENSOR pH
- Part/Accessories List For: MODEL PR10 PR10 Retractable pH/ORP Assembly pH
- Part/Accessories List For: MODEL 810M EXtract Manual Retractable Holder pH
- Part/Accessories List For: MODEL SC25V 12mm COMBINATION ELECTRODE pH
-
Part/Accessory: WU10-V-D-10 Universal sensor cable WU10-V-D-10
- Part/Accessories List For: MODEL 820M EXtract Manual Retractable Holder pH
- Part/Accessories List For: MODEL DO72 OPTICAL DISSOLVED OXYGEN SENSOR DISSOLVED OXYGEN
- Part/Accessories List For: MODEL FU20 pH/ORP SENSOR pH
- Part/Accessories List For: MODEL FU24 pH/ORP SENSOR pH
- Part/Accessories List For: MODEL PR10 PR10 Retractable pH/ORP Assembly pH
- Part/Accessories List For: MODEL 810M EXtract Manual Retractable Holder pH
- Part/Accessories List For: MODEL SC25V 12mm COMBINATION ELECTRODE pH
-
Part/Accessory: WU10-V-D-05 Universal sensor cable WU10-V-D-05
- Part/Accessories List For: MODEL 820M EXtract Manual Retractable Holder pH
- Part/Accessories List For: MODEL DO72 OPTICAL DISSOLVED OXYGEN SENSOR DISSOLVED OXYGEN
- Part/Accessories List For: MODEL FU20 pH/ORP SENSOR pH
- Part/Accessories List For: MODEL FU24 pH/ORP SENSOR pH
- Part/Accessories List For: MODEL PR10 PR10 Retractable pH/ORP Assembly pH
- Part/Accessories List For: MODEL 810M EXtract Manual Retractable Holder pH
- Part/Accessories List For: MODEL SC25V 12mm COMBINATION ELECTRODE pH
- Part/Accessory: WU18-05 5 Meter Cable (18' 0 inch )
- Part/Accessory: WU18-10 10 Meter Cable (Maximum Cable Length) (32' 9 inch )
- Part/Accessory: WU18-03 3 Meter Cable (9' 10 inch )
- Part/Accessory: M1100UV Certificate of Origin
- Part/Accessory: SC29-PTG29 For SS Option: ORP/Glass, Platinum Pins, Glass Resistance: 50-100 Megohms, Temp: 0-100°C
- Part/Accessory: SM21-AG6 For SB Option; Heavy Duty; 0-14 pH; 0-100ºC; 120-200 Megohms, Measuring Glass
- Part/Accessory: SB20-VC Salt Bridge (ceramic)
- Part/Accessory: SR20-AC22 For SC Option; KCI Solution; Ceramic Junction; 0-120ºC; < 5 Kohm, Reference
- Part/Accessory: SC25V-ALP25-120 For SN Option: Combination pH measuring glass,Feference and temp, 15-130C
- Part/Accessory: FP20-S13 For SE Option; Mounting Kit, BELLOMATIC Holder
- Part/Accessory: SR20-AP24 For SA Option; Gel-Filled; PTFE Junction; 0-80ºC; < Kohms, Reference
- Part/Accessory: SC21C-AGC55 Heavy Duty Combination liquid filled pH Electrode
- Part/Accessory: SM23-AN4 For ST Option; SODIUM Glass Reference
- Part/Accessory: SM21-AL4 For SC Option; Hi-Temperature; 0-14 pH; 15-130ºC; 300-450 Megohms, Measuring Glass
- Part/Accessory: SM60-T1 Pt 1000, Temperature
- Part/Accessory: SM29-PT9 For SL Option; ORP Electrode (Platinum), Measuring Metal
- Part/Accessory: SR20-AP26 For SB Option; Gel-Filled; PTFE Junction; 0-80ºC; <5 Kohms, Reference
- Part/Accessory: SR20-AC32 For SE Option; BELLOMATIC; Ceramic Junction; 0-120ºC; < 10 Kohms, Reference
- Part/Accessory: FU24-VP-T1-NPT For SH Option: All-in-one pH /ORP sensor
- Part/Accessory: SM21-AL6 For SD Option; Heavy Duty Hi-Temp; 0-14 pH; 25-130ºC; 600-900 Megohms, Measuring Glass
- Part/Accessory: SM21-AG4 For SA Option; Measuring glass; Shockproof; 0-14 pH; 0-100°C; 50-100 Megohms
- Part/Accessory: SC21-AGP26 For SJ Option; Combined pH/Reference; 2-12PH; 0-100°C. 120-200 Megohms
-
Part/Accessory: WU10-V-D-20 Universal sensor cable WU10-V-D-20
- Part/Accessories List For: MODEL DO72 OPTICAL DISSOLVED OXYGEN SENSOR DISSOLVED OXYGEN
- Part/Accessories List For: MODEL FU20 pH/ORP SENSOR pH
- Part/Accessories List For: MODEL FU24 pH/ORP SENSOR pH
- Part/Accessories List For: MODEL PR10 PR10 Retractable pH/ORP Assembly pH
- Part/Accessories List For: MODEL SC25V 12mm COMBINATION ELECTRODE pH
-
Part/Accessory: WU10-V-D-15 Universal sensor cable WU10-V-D-15
- Part/Accessories List For: MODEL DO72 OPTICAL DISSOLVED OXYGEN SENSOR DISSOLVED OXYGEN
- Part/Accessories List For: MODEL FU20 pH/ORP SENSOR pH
- Part/Accessories List For: MODEL FU24 pH/ORP SENSOR pH
- Part/Accessories List For: MODEL PR10 PR10 Retractable pH/ORP Assembly pH
- Part/Accessories List For: MODEL SC25V 12mm COMBINATION ELECTRODE pH
- Part/Accessory: FS20-P3B-TP PP Insertion holder for new installation with 2" NPT to install FU20. Adapter plate includes cleaning hole and SS plug. If cleaning then K1547PA (/HCN2) Sold Separately
- Part/Accessory: FF20-S3B*B SS holder with 1/2" NPT inlet and outlet for new installation of FU20. Adapter plate includes cleaning hole and SS plug. If cleaning then K1547PA (/HCN2) Sold Separately
- Part/Accessory: FF20-F3B*B PVDF holder with 1/2" NPT inlet and outlet for new installation of FU20. Adapter plate includes cleaning hole and SS plug. (Non stocked) If cleaning then K1547PA (/HCN2) Sold Separately
- Part/Accessory: FF20-P3B*B PP holder with 1/2" NPT inlet and outlet for new installation of FU20. Adapter plate includes cleaning hole and SS plug. (Non stocked) If cleaning then K1547PA (/HCN2) Sold Separately
- Part/Accessory: FS20-S3B-TP SS Insertion holder for new installation with 2" NPT to install FU20. Adapter plate includes cleaning hole and SS plug. If cleaning then K1547PA (/HCN2) Sold Separately
- Part/Accessory: FS20-F3B-TP PVDF Insertion holder for new installation with 2" NPT to install FU20. Adapter plate includes cleaning hole and SS plug. If cleaning then K1547PA (/HCN2) Sold Separately
- Part/Accessory: FF40-S22 Stainless steel (AISI 316L) flow through holder; 1/2" FNPT connection
- Part/Accessory: FS40-V22-TP PVC insertion holder; 1.25" MNPT connection
- Part/Accessory: WU40-LH15 Conductivity Sensor Cable 15.0 m (Non standard length, longer lead time)
- Part/Accessory: WU40-LH02 Conductivity Sensor Cable 2.0 m = 6'7 inch
- Part/Accessory: FS40-F22-TP PVDF insertion holder; 1.25" MNPT connection
- Part/Accessory: FS40-S22-TP Stainless steel (AISI 316L) insertion holder; 1.25" MNPT connection
- Part/Accessory: WU40-LH25 Conductivity Sensor Cable 25.0 M (Non standard length, longer lead time)
- Part/Accessory: WU40-LH10 Conductivity Sensor Cable 10.0 m (Non standard length, longer lead time)
- Part/Accessory: WU40-LH05 Conductivity Sensor Cable 5.5 m = 18'0 inch
- Part/Accessory: FF40-P22 Polypropylene flow through holder; 1/2" FNPT connection
- Part/Accessory: WU40-LH20 Conductivity Sensor Cable 20.0 M (Non standard length, longer lead time)
- Part/Accessory: FF20-S3C*B SS Flow Through holder with 1/2" NPT inlet and outlet for new installation to install FU24. Adapter DOES NOT have cleaning port. M1289GD must be purchased if cleaning is needed.
- Part/Accessory: FF20-P3C*B PP Flow Through holder with 1/2" NPT inlet and outlet for new installation to install FU24. Adapter DOES NOT have cleaning port. M1289FW must be purchased if cleaning is needed. (C/F Non-stocked)
- Part/Accessory: FS20-S3C-TP SS Insertion holder for new installation with 2" NPT to install FU24. Adapter DOES NOT have cleaning port. M1289GD must be purchased if cleaning is needed.
- Part/Accessory: FF20-F3C*B PVDF Flow Through holder with 1/2" NPT inlet and outlet for new installation to install FU24. Adapter DOES NOT have cleaning port. M1289FW must be purchased if cleaning is needed. (C/F Non-stocked)
- Part/Accessory: FS20-F3C-TP PVDF Insertion holder for new installation with 2" NPT to install FU24. Adapter DOES NOT have cleaning port. M1289FW must be purchased if cleaning is needed. (C/F Non-stocked)
- Part/Accessory: FS20-P3C-TP PP Insertion holder for new installation with 2" NPT to install FU24.Adapter DOES NOT have cleaning port. M1289FW must be purchased if cleaning is needed. (C/F Non-stocked)
- Part/Accessory: WU10-V-S-10 Universal sensor cable WU10-V-S-10
- Part/Accessory: WU10-V-S-02 Universal sensor cable WU10-V-S-02
- Part/Accessory: WU10-V-S-05 Universal sensor cable WU10-V-S-05
- Part/Accessory: SC25V-AGP25-120 Universal combined pH/Reference/Temperature electrode, -10-80°C
- Part/Accessory: SC29-PTP29 ORP/Reference, Platinum Measuring, AgCl/Cl reference, Temp: 0-120°C
- Part/Accessory: SC21-ALP26 PTFE Double Junction, Heavy Duty High Temp Glass, Glass Resistance: 500-900 Mohms, Range:0-14pH, Temp:10-120°C
- Part/Accessory: SC21-AAP26 Combined pH/Ref. Electrode; 0-14 pH; 0-100°C; 100-200 Mohms
- Part/Accessory: FD20S37-15-S4*A 1.5 Meter Holder, 316 Stainless Steel with 4.0 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: WU20-LT10 pH Cable, Combination Electrode 10 Meter
- Part/Accessory: FS20-P22-TP/HCN2 Holder; Polypropylene, 2 inch NPT, Hastelloy Cleaning Nozzle; For use with PH20 combo sensor.
- Part/Accessory: WU20-PC15 pH Cable, Any Single Electrode 15 Meter (Non standard length, longer lead time)
- Part/Accessory: FD20P37-10-S2*A 1.0 Meter Holder, Polypropylene with 3.0 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: WU20-PC20 pH Cable, Any Single Electrode 20 Meter(Non standard length, longer lead time)
- Part/Accessory: FD20S37-10-NF*A 1.0 Meter Holder, 316 Stainless Steel W/O Cables or Electrodes
- Part/Accessory: FF20-S33*B/FS3 Holder; 316 Stainless Steel with 1/2 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: FD20P37-15-NF*A 1.5 Meter Holder, Polypropylene W/O Cables or Electrodes
- Part/Accessory: FD20S37-15-NF*A 1.5 Meter Holder, 316 Stainless Steel W/O Cables or Electrodes
- Part/Accessory: FD20S37-10-S4*A 1.0 Meter Holder, 316 Stainless Steel with 4.0 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: FS20-P32-TP Holder, Polypropylene
- Part/Accessory: FF20-F33*B/FF4 Holder; PVDF (Kynar) with 1.0 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: FD20P37-10-NF*A 1.0 Meter Holder, Polypropylene W/O Cables or Electrodes
- Part/Accessory: FF20-S33*B Holder; 316 Stainless Steel with 1/2 inch FNPT W/O Cables or Electrodes
- Part/Accessory: FD20F37-10-NF*A 1.0 Meter Holder, PVDF (Kynar) W/O Cables or Electrodes
- Part/Accessory: FS20-S32-WE Holder, 316 SS welded connection
- Part/Accessory: FS20-F32-TP Holder, PVDF
- Part/Accessory: FF20-P33*B/FP4 Holder, Polypropylene with 1.0 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: WU20-LT05 pH Cable, Combination Electrode 5 Meter
- Part/Accessory: FF20-S22*B/HCN2 Holder; 316 Stainless Steel 1/2 inch FNPT, Hastelloy Cleaning Nozzle; For use with PH20 combo sensor.
- Part/Accessory: WU20-PC02 pH Cable, Any Single Electrode 2 Meter
- Part/Accessory: FF20-P22*B/HCN2 Holder; Polypropylene, 1/2 inch FNPT, Hastelloy Cleaning Nozzle; For use with PH20 combo sensor.
- Part/Accessory: SM60-T2 Temperature sensor; Pt100 RTD (for use with FD, FF and FS models)
- Part/Accessory: WU20-LT15 pH Cable, Combination Electrode 15 Meter
- Part/Accessory: FD20F37-15-NF*A 1.5 Meter Holder, PVDF (Kynar) W/O Cables or Electrodes
- Part/Accessory: FS20-S22-TP/HCN2 Holder; 316 Stainless Steel 2 inch NPT, Hastelloy Cleaning Nozzle; For use with PH20 combo sensor.
- Part/Accessory: FP20-S14 Mounting Kit For SC21-AAC54 or SC29-PTC54 Pressurized Combination Electrodes.
- Part/Accessory: FD20F37-10-S3*A 1.0 Meter Holder, PVDF (Kynar) with 3.0 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: FD20P37-15-S2*A 1.5 Meter Holder, Polypropylene with 3.0 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: FF20-F33*B Holder, PVDF (Kynar) with 1/2 inch FNPT W/O Cables or Electrodes
- Part/Accessory: FF20-F22*B/HCN2 Holder; PVDF, 1/2 inch FNPT, Hastelloy Cleaning Nozzle; For use with PH20 combo sensor.
- Part/Accessory: WU20-PC10 pH Cable, Any Single Electrode 10 Meter
- Part/Accessory: FF20-F33*B/FF3 Holder; PVDF (Kynar) with 1/2 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: FF20-P33*B/FP3 Holder; Polypropylene with 1/2 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: FS20-F22-TP/HCN2 Holder; PVDF, 2 inch NPT, Hastelloy Cleaning Nozzle; For use with PH20 combo sensor.
- Part/Accessory: FF20-P33*B Holder; Polypropylene with 1/2 FNPT W/O Cables or Electrodes
- Part/Accessory: FF20-S22*B 2 hole Holder; 316 Stainless Steel with 1/2 inch FNPT W/O Cables or Electrodes
- Part/Accessory: FD20F37-15-S3*A 1.5 Meter Holder, PVDF (Kynar) with 3.0 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: WU20-LT20 pH Cable, Combination Electrode 20 Meter
- Part/Accessory: WU20-LT02 pH Cable, Combination Electrode 2
- Part/Accessory: FP20-R12 Single Electrode Mounting Set (Ryton) For Any FF/FS/FD Assembly (include 2-11x3 o-rings, blind plug, spacer and electrode cover)
- Part/Accessory: FF20-S33*B/FS4 Holder; 316 Stainless Steel with 1.0 inch , 150# Flange W/O Cable or Electrodes
- Part/Accessory: WU20-PC05 pH Cable, Any Single Electrode 5 Meter
- Part/Accessory: FS20-S32-TP Holder, 316 Stainless Steel
- Part/Accessory: SC72SN-31-AA For SC72: for chemically aggressive measurement with 0.75M cable; Only available until 10/31/24 if still in stock.
- Part/Accessory: SC72SN-21-AA For SC72: for General purpose measurement with 0.75M cable; Only available until 10/31/24 if still in stock.
- Part/Accessory: R/M1289HH Immersion Adapter, 316 Stainless Steel G 3/4 inch to 1-1/4 inch MNPT (For -GG) (Replaces S2510046F1). MUST ORDER O-Ring K1500CF for Viton See spare parts below for more materials
- Part/Accessory: R/M1289HJ Immersion Adapter, PVDF G 3/4 inch to 1-1/4 inch MNPT (For -GG) (Replaces S2510046G1) MUST ORDER O-Ring K1500CF for Viton See spare parts below for more materials
- Part/Accessory: DOX8A-M*B Parts for maintenance kit for the DO30G (this includes K9171HK as well as, zero adjusting agent, polish for silver electrode, and beaker)
- Part/Accessory: PH97-21/ORP For ORP measurement (Glass bulb is replaced with Platinum ORP sensor), 36 inch Cable for use with PH87-21 J-Box
- Part/Accessory: PH97-07/DP/05M COMBINATION PH SENSOR FOR PH87 - conductive Ryton body, recessed TFE junction full range pH glass. PT1000 temperature compensator, cable length = 5 meters in Direct Connection to Transmitter; with solid state reference for Pulp nad Paper Applciaiotns
- Part/Accessory: PH97-07/DP COMBINATION PH SENSOR FOR PH87- conductive Ryton body, recessed TFE junction, full range pH glass, PT1000 Temperature compensator, 24 inch Cable for use with PH87-07 J-Box with Solid State reference for Pulp and Paper applications
- Part/Accessory: PH97-21 COMBINATION PH SENSOR FOR PH87- conductive Ryton body, recessed TFE junction, full range pH glass, PT1000 Temperature compensator, 36 inch Cable for use with PH87-21 J-Box.
- Part/Accessory: PH97-07/DP/ORP COMBINATION ORP SENSOR FOR PH87- conductive Ryton body, recessed TFE junction, full range pH glass, PT1000 Temperature compensator, 24 inch Cable for use with PH87-07 J-Box with Solid State reference for Pulp and Paper applications
- Part/Accessory: PH97-07/ORP/05M For ORP measurement (Glass bulb is replaced with Platinum ORP sensor), with 5 meter integral cable
- Part/Accessory: PH97-07/ORP For ORP measurement (Glass bulb is replaced with Platinum ORP sensor), 24 inch Cable for use with PH87-07 J-Box.
- Part/Accessory: PH97-07/ORP/10M For ORP measurement (Glass bulb is replaced with Platinum ORP sensor), with 10 meter integral cable
- Part/Accessory: PH97-21/DP COMBINATION PH SENSOR FOR PH87- conductive Ryton body, recessed TFE junction, full range pH glass, PT1000 Temperature compensator, 36 inch Cable for use with PH87-21 J-Box; with solid state reference for Pulp and Paper Applications
- Part/Accessory: PH97-07/05M COMBINATION PH SENSOR FOR PH87 - conductive Ryton body, recessed TFE junction full range pH glass. PT1000 temperature compensator, cable length = 5 meters in Direct Connection to Transmitter
- Part/Accessory: PH97-07/10M COMBINATION PH SENSOR FOR PH87 - conductive Ryton body, recessed TFE junction full range pH glass. PT1000 temperature compensator, cable length = 10 meters in Direct Connection to Transmitter
- Part/Accessory: PH97-07/DP/10M COMBINATION PH SENSOR FOR PH87 - conductive Ryton body, recessed TFE junction full range pH glass. PT1000 temperature compensator, cable length = 10 meters in Direct Connection to Transmitter; with solid state reference for Pulp and paper appliciatons
- Part/Accessory: PH97-07 COMBINATION PH SENSOR FOR PH87- conductive Ryton body, recessed TFE junction, full range pH glass, PT1000 Temperature compensator, 24 inch Cable for use with PH87-07 J-Box
- Part/Accessory: PH97-21/DP/ORP COMBINATION ORP SENSOR FOR PH87- conductive Ryton body, recessed TFE junction, full range Ph glass, PT1000 Temperature compensator, 36 inch Cable for use with PH87-21 J-Box; with solid state reference for Pulp and Paper Applications
- Part/Accessory: PH72SN-21-AA For PH71/72; KCl replenish-free type combination pH sensor with 3M cable ASAP: For PH71/72; KCl replenish-free type combination pH sensor with 3M cable; Only available until 10/31/24 if still in stock.
- Part/Accessory: OR72SN-41-AA For PH72; KCl refillable ORP sensor with 0.75M cable; Only available until 10/31/24 if still in stock.
- Part/Accessory: PH72SN-13-AA For PH71/72; KCl replenish-free type combination pH sensor with 3M cable ASAP: For PH71/72; KCl replenish-free type combination pH sensor with 3M cable; Only available until 10/31/24 if still in stock.
- Part/Accessory: R/SC42-SP26/R/10 316 Stainless Steel Constant=0.1/cm with 32'9 inch of Cable
- Part/Accessory: R/SC42-SP36/R 316 Stainless Steel Constant=0.02/cm with 18' of Cable
- Part/Accessory: R/SC42-SP26/R 316 Stainless Steel Constant=0.1/cm with 18' of Cable
- Part/Accessory: R/SC42-SP36/R/10 316 Stainless Steel Constant=0.02/cm with 32'9 inch of Cable
MODEL GD402G/GD402T/GD402VGAS DENSITY CONVERTERDENSITY
MODEL GD40G/GD40T/GD40VGAS DENSITY DETECTORDENSITY
MODEL GDWDETECTOR CABLE / SAMPLE CONDITIONERDENSITY