Loading...Type at least 2 characters to begin search.
No records found.
- Model: FC800D Non-reagent Type Free Chlorine Sensor
- Model: SM21 pH Measuring Electrodes Only
- Model: R/810M Manual Retractable Holder
- Model: FLXA402T Liquid Analyzer for Turbidity and Chlori
- Model: ZR22G Zirconia Oxygen/Humidity Analyzer Detector
- Model: WU11 SENCOM Cable
- Model: ZR22S Explosionproof Oxygen Analyzer Detector
- Model: IAC24 Integral Auto Calibration Unit
- Model: PB350G Slant Type Float Holder
- Model: PH18 DIFFERENTIAL pH SENSOR
- Model: AWF10 Extension Cable, Multi-Core, Shielded for Low Voltage, High Impedance
- Model: SX42 HIGH PRESSURE/ TEMP CONDUCTIVITY SENSOR (Pt1000 RTD)
- Model: DO71 Optical Dissolved Oxygen Sensor
- Model: WE10 Generic cable
- Model: ZR22P High Temperature Probe Adapter
- Model: TB820D Right Angle Scattering Turbidity Detector
- Model: PH21 Wide Body sensor for water and wastewater - pH Only no Liquid Earth
- Model: ZR802S Ex-proof Zirconia Oxygen converter
- Model: R/AC1 Single Channel Auto Calibration
- Model: PH92 Portable pH/ORP meter
- Model: FLXA202 2-WIRE LOOPED POWER ANALYZER
- Model: AFS20 ON-LINE pH/ORP SENSOR
- Model: SC25V Combination pH, Reference, Temperature and solution ground 12mm Electrode
- Model: ZR202G Integral Type Zirconia Oxygen/Humidity Analyzer
- Model: ZR22R Low Temperature Probe Protector
- Model: GDW Two Core, Double Shielded cable, both ends finished with cable pins
- Model: AV55CM Channel Card
- Model: WZ High Temp Cable (FEP Jacket (Up to 390ºF)(200ºC))
- Model: OX400 Extractive Low Concentration Oxygen Analzyer
- Model: ZR22V Low Temperature Probe Support
- Model: PG400 Pulse generator for clean unit
- Model: AV550G Averaging Zirconia Oxygen Converter
- Model: FF40 CONDUCTIVITY FLOW ASSEMBLY (For Large Bore Sensors)
- Model: ISC40FF FLOW THROUGH FITTING
- Model: SC4A CONDUCTIVITY SENSOR
- Model: ZR802G Zirconia Oxygen/Humidity Analyzer
- Model: DO72 Optical Dissolved Oxygen Sensor
- Model: ZR202S Explosion proof Oxygen Analyzer Detector
- Model: DO30G Dissolved Oxygen Sensor
- Model: BA11 Active Junction Box
- Model: ISC40FS FLOW SUB-ASSEMBLY
- Model: IB100 Interface box for SENCOM
- Model: AFF20 FLOW THROUGH pH/ORP SENSOR
- Model: AC4 4 Channel Auto Calibration System
- Model: AC8 8 Channel Auto Calibration System
- Model: GD40V CSA Certified Detector
- Model: GD40G General Purpose Detector
- Model: GD40T FM Certified Dectector
- Model: ISC40S Intrinsically Safe Inductive Conductivity Sensor
- Model: ISC40G General Purpose Inductive Conductivity Sensor
- Model: SC92 Portable conductivity meter
- Model: ZR202A ZR202 Heater Strut
- Model: ZR22A ZR22 Heater Strut
- Model: SC42 CONDUCTIVITY SENSOR Pt 1000 Temperature Element
-
Model: R/SC42 SMALL BORE CONDUCTIVITY SENSOR (2-ELECTRODE) PT1000 TEMP SENSOR
- Configuration Page For: MODEL SC42 HIGH PRESSURE, HIGH TEMPERATURE SMALL-BORE CONDUCTIVITY SENSORS CONDUCTIVITY
- Configuration Page For: MODEL SC42 Conductivity 2-Electrode SMALL-BORE CONDUCTIVITY SENSORS CONDUCTIVITY
- Configuration Page For: MODEL SC42 Tri-Clover 2-Electrode SMALL-BORE CONDUCTIVITY SENSORS CONDUCTIVITY
- Model: PH87 TITANIUM RETRACTABLE pH ASSEMBLY WITH JUNCTION BOX
- Model: GD402G General Purpose Converter
- Model: GD402T FM Certified Converter
- Model: ISC40FD IMMERSION FITTING (For ISC40 *G Sensors Only)
- Model: SA11 SENCOM Smart Adapter
- Model: MC1 Single Channel Manual Calibration
- Model: AFD20 IMMERSION pH/ORP SENSOR
- Model: DOX8HS Submersion Type Holder
- Model: WU20 Cables for use with the SM21, SR20, SM60, SM29 Electrodes
- Model: UM33A Digital Indicator with alarms (retransmission outputs or 15 VDC loop power supply, 2DI, 3DO)
- Model: SR20 Reference Electrodes Only
- Model: R/340 Static Sensor Holder
- Model: SM60 Temperature Electrodes (only to be used with pH/ORP electrode measurement setups)
- Model: FLXA402 4-Wire Converter
- Model: PR10 Retractable pH/ORP Assembly
- Model: WU10 Variopin cable
- Model: FU20 Universal pH/ORP Sensor
- Model: R/820M Manual Retractable
- Model: FS40 CONDUCTIVITY FLOW ASSEMBLY (For Large Bore Sensors)
- Model: WU40 Conductivity Sensor Cable
- Model: FU24 Universal pH/ORP Sensor for Harsh Applications
- Part/Accessory: 1W-237230 /BSA1 = 316 Stainless Steel Blind Plug with mounting nut (replaced K1522MV and K1500BT-which was the mounting nut only)
- Part/Accessory: K1500DU Solution Ground Cable, For FF, FS and FD Assy (25 m)
- Part/Accessory: K1500DV PG13.5 adaptor for F*20 (PVDF) (-SN option)
- Part/Accessory: K1500EQ O-ring set EPDM for FF20-S22/FS20-S22
- Part/Accessory: K1500ER O-ring set VITON for FF20-S22/FS20-S22
- Part/Accessory: K1500ES O-ring set EPDM for FF20-P33/FF20-F33 and FS20-P32/FS20-F32
- Part/Accessory: K1500ET Large Viton O-Ring for FF20-P/F33, FS20-P/F33 and PH18; NOT for FF20-S33 (old special number S82895276)
- Part/Accessory: K1500EU O-ring set EPDM for FF20-S33 and FS20-S32
- Part/Accessory: K1500EV O-ring set VITON for FF20-S33 and FS20-S32
- Part/Accessory: K1500EZ O-ring set Vition FF20-S43
- Part/Accessory: K1500FA O-ring set EPDM for FD20-P37
- Part/Accessory: K1500FB O-ring set VITON for FD20-P37 FD20-F37
- Part/Accessory: K1500FC O-ring set EPDM for FD20-P37
- Part/Accessory: K1500FD O-ring set VITON for FD20-S37
- Part/Accessory: K1500FJ O-ring set EPDM FF20-P22/FF20-F22/FS20-P22/FS20-F22
- Part/Accessory: K1500FK O-ring set EPDM FF20-P22/FF20-F22/FS20-P22/FS20-F22
- Part/Accessory: K1500FL O-ring set Silicone FF20-P22/FF20-F22/FS20-P22/FS20-F22
- Part/Accessory: K1500FM O-ring set Silicone FF20-S22/FS20-S22
- Part/Accessory: K1500FR Viton O-ring (set of 5) for 1 inch adapter K1547PK
- Part/Accessory: K1500FS EPDM O-ring (set of 5) for 1 inch adapter K1547PK
- Part/Accessory: K1500FT Silicon O-ring (set of 5) for 1 inch adapter K1547PK
- Part/Accessory: K1500FU KCl Reservoir, with 2.5 Meters of tubing
- Part/Accessory: K1500FV Solution Ground Cable, For FF, FS and FD Assy (10 m)
- Part/Accessory: K1500FX O-rings Silicone 70 29.74 x 3.53 (5)
- Part/Accessory: K1500GF 250 ml, 1 molal KCl Solution
- Part/Accessory: K1500GG 250 ml, 1 molal KCl Solution (High Viscosity for high temperatures)
- Part/Accessory: K1500GN O-Ring, Set (7 Pieces, Silicon) for FF20/FS20 3-Hole Stainless Steel Holders
- Part/Accessory: K1500GP O-Ring, Set (8 Pieces, Silicon) for All FF20/FS20 3-Hole Plastic Holders
- Part/Accessory: K1500GR O-Ring, Set (8 Pieces, Silicon) for All Standard Electrodes In All FF/FS/FD Assemblies
- Part/Accessory: K1500GU O-Ring, Set (10 Pieces, Silicon) for All FD20 3-Hole Plastic Holders
- Part/Accessory: K1500GW O-Ring, Set (10 Pieces, Silicon) for FD20 3-Hole Stainless Steel Holders
- Part/Accessory: K1500GZ Liquid Earth pin for Plastic holders of any FF20/FS20/FD20
- Part/Accessory: K1500HA Claibration dishes for FF20-*33 (qty 50)
- Part/Accessory: K1500HC Rubber Spacer Set (2 pieces) for FP20-S13 (Bellowmatic Holder)
- Part/Accessory: K1520BF Buffer Solution Kit (4/7/9) with ionic strength 1 mol NaCl, one each 500ml bottle (For use with the FU20-FTS Sensor) (These items are no longer stocked and only have a guaranteed shelf life of 6 months from the date of shipment)
- Part/Accessory: K1520BG Buffer Solution- pH 2.0 with ionic strength 1 mol NaCl 500ml (For use with the FU20-FTS Sensor) (These items are no longer stocked and only have a guaranteed shelf life of 6 months from the date of shipment)
- Part/Accessory: K1520BH Buffer Solution- pH 4.0 with ionic strength 1 mol NaCl 500ml (For use with the FU20-FTS Sensor) (These items are no longer stocked and only have a guaranteed shelf life of 6 months from the date of shipment)
- Part/Accessory: K1520BJ Buffer Solution- pH 7.0 with ionic strength 1 mol NaCl 500ml (For use with the FU20-FTS Sensor) (These items are no longer stocked and only have a guaranteed shelf life of 6 months from the date of shipment)
- Part/Accessory: K1520BK Buffer Solution- pH 9.0 with ionic strength 1 mol NaCl 500ml (For use with the FU20-FTS Sensor) (These items are no longer stocked and only have a guaranteed shelf life of 6 months from the date of shipment)
- Part/Accessory: K1520EJ Straight Weld-In Adapter 316 Stainless Steel without mounting nut (replaces K1522ER)
- Part/Accessory: K1520EK Angled weld in 25 mm Adapter without mounting nut (replacement for /SWA option K1522EQ)
- Part/Accessory: K1520JN PG13.5 adaptor for F*20 (PP) (-SN option)
- Part/Accessory: K1521TF END ASSY BOTTLE PH4/7/10 BUFFER CAPSULES
- Part/Accessory: K1523DD Noryl Plastic FU20 Flow through adapter (Adapter for use with the FF40/FS40 holders)
- Part/Accessory: K1523JA Adapter for placing PG13.5 sensors in F*40 holders, Noryl Material
- Part/Accessory: K1520JP PG13.5 adaptor for F*20 (SS) (-SN Option)
- Part/Accessory: K1520VA 3.3 Molar KCl Refill Solution (250 ml Bottle)
- Part/Accessory: K1523JB Noryl adapter to convert PG13.5 to 3/4" NPT to be used with K1598AC flow thru holder
- Part/Accessory: K1523JC Adapter for placing PG13.5 sensors in F*40 holders, SS Material
- Part/Accessory: K1520VN 250 ml, 3.3 molal KCl Solution (High Viscosity)
- Part/Accessory: K1520ZD Plastic Nut for use on the K1547PK adapter
- Part/Accessory: K1521AD 1/2" ANSI 150 LB AISI316 flange adapter (/FS3 option) (Comes with 2 flanges)
- Part/Accessory: K1521AE 1/2" 150# ANSI; PVDF Lap Joint Flange Kit for (/FF3 option) (Comes with 2 flanges)
- Part/Accessory: K1521AF 1/2" ANSI 150 LB AISI Pollypro flange adapter (/FP3 option) (Comes with 2 flanges)
- Part/Accessory: K1521AG 316SST 1 inch 150# flange adapter (/FS4 option) (Comes with 2 flanges)
- Part/Accessory: K1521AH PVDF 1 inch 150# flange adapter (Comes with 2 flanges)
- Part/Accessory: K1521AJ Polypropylene 1 inch 150# flange adapter (/FP4 option) (Comes with 2 flanges)
- Part/Accessory: K1521TA END ASSY BOTTLE PH1.68 BUFFER CAPSULES
- Part/Accessory: K1521TB END ASSY BOTTLE PH4.01 BUFFER CAPSULES
- Part/Accessory: K1521TC END ASSY BOTTLE PH6.87 BUFFER CAPSULES
- Part/Accessory: K1521TD END ASSY BOTTLE PH10.01 BUFFER CAPSULES
- Part/Accessory: K1521TE END ASSY BOTTLE PH12.45 BUFFER CAPSULES
- Part/Accessory: K1542FA Straight weld in 25 mm Adapter with mounting nut
- Part/Accessory: K1500BN PH18 O-Ring EPDM For 1-1/2 inch Tri-Clamp ( /SE5 option )
- Part/Accessory: K1500BP PH18 O-Ring EPDM For 2 inch Tri-Clamp ( /SE4 option )
- Part/Accessory: K1500BV O-Rings EPDM 11x3 (6 pc.)
- Part/Accessory: K1500BW Flow Tube for Salt Bridge (SB20-VC)
- Part/Accessory: K1500BY Mounting Kit For SR20-AC52 & SR20-AS52 Electrodes
- Part/Accessory: K1500BZ o-ring set viton 11x3 (6pcs) (for the electrodes in the FF/FS/FD20 assemblies 2 per sensor.
- Part/Accessory: K1547PA Optional Hastelloy Cleaning System (HCN2 option), for F*20 holders
- Part/Accessory: K1547PJ Hastelloy Cleaning System (HCNF option), for Immersion Applications
- Part/Accessory: K1547PK 1 inch NPT 316LSS Adapter (/NSS option) (Viton O-ring)
- Part/Accessory: K1547PM 1 inch NPT Titanium Adapter (/NTI option) (Viton O-ring)
- Part/Accessory: K1547PP Spray cleaner replacement rupper tips (5)
- Part/Accessory: M1100EU (500ml of each 4.01,6.86 and 9.18)
- Part/Accessory: M1132RN 0-5 GPH Rotometer for use with FF20
- Part/Accessory: M1200HQ NIST Buffer 4.01 (5 Gallon Size)
- Part/Accessory: M1200HR NIST Buffer 6.86 (5 Gallon Size)
- Part/Accessory: M1200HS NIST Buffer 9.18 (5 Gallon Size)
- Part/Accessory: M1263LP Stainless Steel adapter to convert to 3/4" NPT to be used with K1598AC flow thru holder (Equivalent to K1523JD; replaced S200468G1)
- Part/Accessory: M1263VM NIST Buffer 4.01 (1 Gallon Size) (Replaced M1263MZ)
- Part/Accessory: M1263VN NIST Buffer 6.86 (1 Gallon Size) (Replaced M1263NA)
- Part/Accessory: M1263VP NIST Buffer 9.18 (1 Gallon Size) (Replaced M1263NB)
- Part/Accessory: M1263XY Complete PH18 O-ring Kit (QTY 1 O-ring of each size)
- Part/Accessory: M1263XZ PH18 Internal O-Ring Viton A 25.0 x 1.5 (QTY 1) (Replaces K1500BS)
- Part/Accessory: M1263YA PH18 O-Ring EPDM 17.0 x 3.0 (QTY 1) (Repleaced K1522FK)
- Part/Accessory: M1263YB PH18.O-Ring FDA-Approved EPDM 20.0 x 2.5 (QTY1) (Replaced K1500BJ)
- Part/Accessory: M1263YC PH18 O-Ring FDA- Approved EPDM 17.0 x 2.5 (QTY 1) (Replaces K1500BR)
- Part/Accessory: M1263YE PH18.O-Ring Kalrez 6375; 25.0 x 1.5 (QTY 1)
- Part/Accessory: M1263YF PH18.O-Ring Kalrez 6375; 17.0 x 3.0 (QTY 1)
- Part/Accessory: M1263YG PH18.O-Ring Kalrez 6375; 20.0 x 2.5 (QTY1)
- Part/Accessory: M1263YH PH18.O-Ring Kalrez 6375; 17.0 x 2.5 (QTY 1)
- Part/Accessory: M1289GX /SNS = 1.0 inch NPT Adapter 316 Stainless Steel (replaced K1522ES)
- Part/Accessory: M1289JL PG13.5 TO 3/4" NPT ADAPTER, PVDF
- Part/Accessory: S115746 For SR Option; ECP Electrode (copper), Measuring Metal
- Part/Accessory: S115746A For SW Option; ECP Electrode (brass), Measuring Metal
- Part/Accessory: S115746B For SX Option; ECP Electrode (steel), Measuring Metal
- Part/Accessory: 1W-10068709-1111 VisiTrace Optical DO 120 mm VP for low ppb ranges (standalone 4-20 mA 2-wire device); replaced 1W-243560
- Part/Accessory: 1W-237118 OXYLYTE ELECTROLYTE (For OXYFERM) (30 ml bottle)(Due to new HAZCOM rules the volume was changed from 50 ml to 30ml)
- Part/Accessory: 1W-237123 OXYFERM MEMBRANE KIT (KIT OF 3)(No electrolyte is included)
- Part/Accessory: 1W-237135 OXYGOLD G MEMBRANE KIT (KIT OF 3)(No electrolyte is included)
- Part/Accessory: 1W-242411 USB-ModBus RS485 Converter used for VisiWater Calibrations. External 24 VDC (i.e. AAK Corp CM24.1) power must be used to power the sensor.
- Part/Accessory: 1W-243499 Wireless ARC Calibration USB Converter with Blue Tooth for use with VisiTrace; Also need 1W-355288 M12 Power Cable
- Part/Accessory: 1W-243505 VisiFerm H2 cap with additional PTFE layer and hygenic design for rather demanding applications (replaced 1W-243510)
- Part/Accessory: 1W-243515 VisiFerm Standard Sensor Replacement H0 Cap (replaces 1W-242427 P0 Cap)
- Part/Accessory: 1W-243530 VisiTrace Replacement ODO Cap L0
- Part/Accessory: 1W-243490-01 ARC Calibration USB and Power Cable device for VP Arc Sensors (VisiFerm).
- Part/Accessory: 1W-243650 VisiWater Optical DO 120mm with 10M integral cable for wastewater apps. Standalone 4-20mA device.
- Part/Accessory: 1W-243575 Calibration Stand for Optical Do sensors. Allows for connection of gases to do Zero (air) and span
- Part/Accessory: 1W-355109 3 meter Variopin cable; (REQUIRED for VP sensor)
- Part/Accessory: 1W-355110 5 meter Variopin cable; (REQUIRED for VP sensor)
- Part/Accessory: 1W-355111 10 meter Variopin cable; (REQUIRED for VP sensor)
- Part/Accessory: 1W-355218 3 Meter VP8 Cable for use with VIsiFerm
- Part/Accessory: 1W-355219 5 Meter VP8 Cable for use with VIsiFerm
- Part/Accessory: 1W-355220 10 Meter VP8 Cable for use with VIsiFerm
- Part/Accessory: 1W-355283 M12 Sensor Cable 3M for VisiTrace
- Part/Accessory: 1W-355284 M12 Sensor Cable 5Mfor VisiTrace
- Part/Accessory: 1W-355285 M12 Sensor Cable 10M for VisiTrace
- Part/Accessory: 1W-355288 M12 Calibration Cable with Power for use with VisiTrace; Also need 1W-243499 for calibration
- Part/Accessory: 1W-237350 Polarization Module for OXYFERM VP and OXYGOLD G
- Part/Accessory: 1W-237139 OXYLYTE G ELECTROLYTE (For OXYGOLD G) (30 ml bottle)(Due to new HAZCOM rules the volume was changed from 50 ml to 30ml)
- Part/Accessory: 1W-237150 Oxysens;Maint.free sensor with 5M integral cable for immersion application must also purchase 237158
- Part/Accessory: 1W-237158 Immersion Set for use with 237150
- Part/Accessory: 1W-237331-25 FLEXIFIT BIO-25 (25mm Port / Ingold Port fitting; 25mm seal point)
- Part/Accessory: 1W-237341 FLEXIFIT TC 150-33 (1.5" Tri-Clamp fitting)
- Part/Accessory: 1W-237427 OXYGOLD G CATHODE
- Part/Accessory: 1W-237540 OXYFERM FDA VP 120 (Replaces 1W-237400)
- Part/Accessory: 1W-237395 OXYGOLD G 120 VP (For Power-Plant ppb DO applications)
- Part/Accessory: K1598AC Flow Fitting; 316 SS 1/4" x 1/4" x 3/4" (/FF option) (for -AD mounting option only) (Replaced the K1598AB)
- Part/Accessory: FS20-P22-TP/HCN2 Holder; Polypropylene, 2 inch NPT, Hastelloy Cleaning Nozzle; For use with PH20 combo sensor.
- Part/Accessory: FD20S37-15-S4*A 1.5 Meter Holder, 316 Stainless Steel with 4.0 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: WU20-LT10 pH Cable, Combination Electrode 10 Meter
- Part/Accessory: WU20-PC15 pH Cable, Any Single Electrode 15 Meter (Non standard length, longer lead time)
- Part/Accessory: FD20P37-10-S2*A 1.0 Meter Holder, Polypropylene with 3.0 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: SC29-PTG29 For SS Option: ORP/Glass, Platinum Pins, Glass Resistance: 50-100 Megohms, Temp: 0-100°C
- Part/Accessory: WU20-PC20 pH Cable, Any Single Electrode 20 Meter(Non standard length, longer lead time)
- Part/Accessory: FF20-S3C*B SS Flow Through holder with 1/2" NPT inlet and outlet for new installation to install FU24. Adapter DOES NOT have cleaning port. M1289GD must be purchased if cleaning is needed.
- Part/Accessory: FD20P37-15-NF*A 1.5 Meter Holder, Polypropylene W/O Cables or Electrodes
- Part/Accessory: FS20-P3B-TP PP Insertion holder for new installation with 2" NPT to install FU20. Adapter plate includes cleaning hole and SS plug. If cleaning then K1547PA (/HCN2) Sold Separately
- Part/Accessory: SM21-AG6 For SB Option; Heavy Duty; 0-14 pH; 0-100ºC; 120-200 Megohms, Measuring Glass
- Part/Accessory: FD20S37-10-NF*A 1.0 Meter Holder, 316 Stainless Steel W/O Cables or Electrodes
- Part/Accessory: FF20-S33*B/FS3 Holder; 316 Stainless Steel with 1/2 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: FD20S37-15-NF*A 1.5 Meter Holder, 316 Stainless Steel W/O Cables or Electrodes
- Part/Accessory: SB20-VC Salt Bridge (ceramic)
- Part/Accessory: SR20-AC22 For SC Option; KCI Solution; Ceramic Junction; 0-120ºC; < 5 Kohm, Reference
- Part/Accessory: FD20S37-10-S4*A 1.0 Meter Holder, 316 Stainless Steel with 4.0 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: FS20-P32-TP Holder, Polypropylene
- Part/Accessory: SR20-AP24 For SA Option; Gel-Filled; PTFE Junction; 0-80ºC; < Kohms, Reference
- Part/Accessory: FF20-F33*B/FF4 Holder; PVDF (Kynar) with 1.0 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: SC21C-AGC55 Heavy Duty Combination liquid filled pH Electrode
- Part/Accessory: FF20-S33*B Holder; 316 Stainless Steel with 1/2 inch FNPT W/O Cables or Electrodes
- Part/Accessory: FP20-S13 For SE Option; Mounting Kit, BELLOMATIC Holder
- Part/Accessory: FF20-P3C*B PP Flow Through holder with 1/2" NPT inlet and outlet for new installation to install FU24. Adapter DOES NOT have cleaning port. M1289FW must be purchased if cleaning is needed. (C/F Non-stocked)
- Part/Accessory: FD20P37-10-NF*A 1.0 Meter Holder, Polypropylene W/O Cables or Electrodes
- Part/Accessory: SM23-AN4 For ST Option; SODIUM Glass Reference
- Part/Accessory: SM21-AL4 For SC Option; Hi-Temperature; 0-14 pH; 15-130ºC; 300-450 Megohms, Measuring Glass
- Part/Accessory: FS20-S32-WE Holder, 316 SS welded connection
- Part/Accessory: FF20-S3B*B SS holder with 1/2" NPT inlet and outlet for new installation of FU20. Adapter plate includes cleaning hole and SS plug. If cleaning then K1547PA (/HCN2) Sold Separately
- Part/Accessory: FD20F37-10-NF*A 1.0 Meter Holder, PVDF (Kynar) W/O Cables or Electrodes
- Part/Accessory: FS20-F32-TP Holder, PVDF
- Part/Accessory: FF20-P33*B/FP4 Holder, Polypropylene with 1.0 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: WU20-LT05 pH Cable, Combination Electrode 5 Meter
- Part/Accessory: FS20-S3C-TP SS Insertion holder for new installation with 2" NPT to install FU24. Adapter DOES NOT have cleaning port. M1289GD must be purchased if cleaning is needed.
- Part/Accessory: FF20-P22*B/HCN2 Holder; Polypropylene, 1/2 inch FNPT, Hastelloy Cleaning Nozzle; For use with PH20 combo sensor.
- Part/Accessory: SM60-T1 Pt 1000, Temperature
- Part/Accessory: FF20-S22*B/HCN2 Holder; 316 Stainless Steel 1/2 inch FNPT, Hastelloy Cleaning Nozzle; For use with PH20 combo sensor.
- Part/Accessory: FF20-F3B*B PVDF holder with 1/2" NPT inlet and outlet for new installation of FU20. Adapter plate includes cleaning hole and SS plug. (Non stocked) If cleaning then K1547PA (/HCN2) Sold Separately
- Part/Accessory: WU20-PC02 pH Cable, Any Single Electrode 2 Meter
- Part/Accessory: SM29-PT9 For SL Option; ORP Electrode (Platinum), Measuring Metal
- Part/Accessory: SC29-PTP29 ORP/Reference, Platinum Measuring, AgCl/Cl reference, Temp: 0-120°C
- Part/Accessory: FS20-S22-TP/HCN2 Holder; 316 Stainless Steel 2 inch NPT, Hastelloy Cleaning Nozzle; For use with PH20 combo sensor.
- Part/Accessory: FP20-S14 Mounting Kit For SC21-AAC54 or SC29-PTC54 Pressurized Combination Electrodes.
- Part/Accessory: FD20F37-10-S3*A 1.0 Meter Holder, PVDF (Kynar) with 3.0 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: FS20-F3C-TP PVDF Insertion holder for new installation with 2" NPT to install FU24. Adapter DOES NOT have cleaning port. M1289FW must be purchased if cleaning is needed. (C/F Non-stocked)
- Part/Accessory: WU20-LT15 pH Cable, Combination Electrode 15 Meter
- Part/Accessory: SC21-ALP26 PTFE Double Junction, Heavy Duty High Temp Glass, Glass Resistance: 500-900 Mohms, Range:0-14pH, Temp:10-120°C
- Part/Accessory: FF20-P3B*B PP holder with 1/2" NPT inlet and outlet for new installation of FU20. Adapter plate includes cleaning hole and SS plug. (Non stocked) If cleaning then K1547PA (/HCN2) Sold Separately
- Part/Accessory: FD20P37-15-S2*A 1.5 Meter Holder, Polypropylene with 3.0 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: FF20-F3C*B PVDF Flow Through holder with 1/2" NPT inlet and outlet for new installation to install FU24. Adapter DOES NOT have cleaning port. M1289FW must be purchased if cleaning is needed. (C/F Non-stocked)
- Part/Accessory: FD20F37-15-NF*A 1.5 Meter Holder, PVDF (Kynar) W/O Cables or Electrodes
- Part/Accessory: SR20-AP26 For SB Option; Gel-Filled; PTFE Junction; 0-80ºC; <5 Kohms, Reference
- Part/Accessory: FF20-F33*B Holder, PVDF (Kynar) with 1/2 inch FNPT W/O Cables or Electrodes
- Part/Accessory: SR20-AC32 For SE Option; BELLOMATIC; Ceramic Junction; 0-120ºC; < 10 Kohms, Reference
- Part/Accessory: FS20-F3B-TP PVDF Insertion holder for new installation with 2" NPT to install FU20. Adapter plate includes cleaning hole and SS plug. If cleaning then K1547PA (/HCN2) Sold Separately
- Part/Accessory: FF20-P33*B/FP3 Holder; Polypropylene with 1/2 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: FS20-S3B-TP SS Insertion holder for new installation with 2" NPT to install FU20. Adapter plate includes cleaning hole and SS plug. If cleaning then K1547PA (/HCN2) Sold Separately
- Part/Accessory: FF20-F22*B/HCN2 Holder; PVDF, 1/2 inch FNPT, Hastelloy Cleaning Nozzle; For use with PH20 combo sensor.
- Part/Accessory: SM21-AL6 For SD Option; Heavy Duty Hi-Temp; 0-14 pH; 25-130ºC; 600-900 Megohms, Measuring Glass
- Part/Accessory: FS20-F22-TP/HCN2 Holder; PVDF, 2 inch NPT, Hastelloy Cleaning Nozzle; For use with PH20 combo sensor.
- Part/Accessory: WU20-PC10 pH Cable, Any Single Electrode 10 Meter
- Part/Accessory: FF20-F33*B/FF3 Holder; PVDF (Kynar) with 1/2 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: SC21-AGP26 For SJ Option; Combined pH/Reference; 2-12PH; 0-100°C. 120-200 Megohms
- Part/Accessory: FF20-P33*B Holder; Polypropylene with 1/2 FNPT W/O Cables or Electrodes
- Part/Accessory: SC21-AAP26 Combined pH/Ref. Electrode; 0-14 pH; 0-100°C; 100-200 Mohms
- Part/Accessory: FF20-S22*B 2 hole Holder; 316 Stainless Steel with 1/2 inch FNPT W/O Cables or Electrodes
- Part/Accessory: FS20-P3C-TP PP Insertion holder for new installation with 2" NPT to install FU24.Adapter DOES NOT have cleaning port. M1289FW must be purchased if cleaning is needed. (C/F Non-stocked)
- Part/Accessory: WU20-LT20 pH Cable, Combination Electrode 20 Meter
- Part/Accessory: WU20-LT02 pH Cable, Combination Electrode 2
- Part/Accessory: FP20-R12 Single Electrode Mounting Set (Ryton) For Any FF/FS/FD Assembly (include 2-11x3 o-rings, blind plug, spacer and electrode cover)
- Part/Accessory: FD20F37-15-S3*A 1.5 Meter Holder, PVDF (Kynar) with 3.0 inch , 150# Flange W/O Cables or Electrodes
- Part/Accessory: FF20-S33*B/FS4 Holder; 316 Stainless Steel with 1.0 inch , 150# Flange W/O Cable or Electrodes
- Part/Accessory: SM21-AG4 For SA Option; Measuring glass; Shockproof; 0-14 pH; 0-100°C; 50-100 Megohms
- Part/Accessory: WU20-PC05 pH Cable, Any Single Electrode 5 Meter
- Part/Accessory: FS20-S32-TP Holder, 316 Stainless Steel
MODEL GD402G/GD402TGAS DENSITY CONVERTERDENSITY
MODEL GD40G/GD40T/GD40VGAS DENSITY DETECTORDENSITY
MODEL GDWDETECTOR CABLE / SAMPLE CONDITIONERDENSITY