YCA Store | Products | Flowmeters | ADMAG | Integral/Remote Flowtube PFA Lining

Product Categories

#	Model/Spec/Part No.	Description
AXG005 Magnetic Flowmeter (5mm/0.2in.)
14 Display (Mandatory for Integral Flowtube) (Please make one selection)
	1	With Display (English, Multi-language)
	3	With Display (English)
	N	Without Display / Remote Sensor
01 Use (Please make one selection)
	-C	Explosion Protection
	-G	General-purpose
02 Construction (Please make one selection)
	A	Integral Type Flowmeter
	D	Remote Sensor (for AXFA11)
	E	Remote Sensor (for AXG1A)
	G	Remote Sensor (for AXG4A)
03 Explosion Protection (Please make one selection)
	000	Non Explosion Protection Approval
	CF2	Canada Flameproof, Division 1 Class I/II/III GP BCDEFG
	CJ2	Canada Flameproof with IS Output, Division 1 Class I/II/III GP BCDEFG
	CT2	Canada Flameproof with IS Output for FF, Division 1 Class I/II/III GP BCDEFG
	FF2	FM Flameproof, Division 1 Class I/II/III GP ABCDEFG
	FJ2	FM Flameproof with IS Output, Division 1 Class I/II/III GP ABCDEFG
	FT2	FM Flameproof with IS Output for FF, Division 1 Class I/II/III GP ABCDEFG
04 Process Connection (Please make one selection)
	AA1	ASME Class 150 Wafer
	AA2	ASME Class 300 Wafer
	BA1	ASME Class 150 Flange, Stainless Steel F304
	BA2	ASME Class 300 Flange, Stainless Steel F304
	PA1	ASME Class 150 Flange, Stainless Steel F316
	PA2	ASME Class 300 Flange, Stainless Steel F316
05 Lining
	A	PFA Lining
06 Electrode (Please make one selection)
	H	Nickel Alloy
	L	Stainless Steel 316L
	P	Platinum-Iridium
	T	Tantalum
	V	Titanium
07 Grounding Device (Please make one selection)
	1	None
	2	Grounding Rings
08 Housing and Coating (Please make one selection)
	1	Standard Material with Standard Coating, *Read General Specifications sheets.
	2	Standard Material with Rugged Coating, *Read General Specifications sheets.
09 Cable Entry (Please make one selection)
	2	ASME 1/2 NPT Female
	4	ISO M20 x 1.5 Female
10 Accuracy
	B	Standard
11 Power Supply (Please make one selection)
	-1	100-240V AC / 100-120V DC
	-2	24V AC / DC
	-N	None (Remote Sensor)
12 Communication and I/O (Please make one selection)
	DA	BRAIN and I/O (Type A), Iout(Active) x 1, P/Sout(Passive) x 1
	DB	BRAIN and I/O (Type B), Iout(Active) x 2, P/Sout(Passive) x 2
	DC	BRAIN and I/O (Type C), Iout(Active) x 2, P/Sout(Passive) x 1, Sin x 1
	DD	BRAIN and I/O (Type D), Iout(Active) x 1, P/Sout(Passive) x 2, Sout(Passive) x 1
	DE	BRAIN and I/O (Type E), Iout(Active) x 1, P/Sout(Passive) x 2, Sin x 1
	DF	BRAIN and I/O (Type F), Iout(Active) x 1, P/Sout(Passive) x 1, P/Sout(Active, with resistor) x 1, Sin x 1
	DG	BRAIN and I/O (Type G), Iout(Active) x 1, P/Sout(Passive) x 1, P/Sout(Active, without resistor) x 1, Sin x 1
	DH	BRAIN and I/O (Type H), Iout(Active) x 1, Iout(Passive) x 1, P/Sout(Passive) x 1, Iin(Active) x 1
	DJ	BRAIN and I/O (Type J), Iout(Active) x 1, P/Sout(Passive) x 2, Iin(Active) x 1
	DK	BRAIN and I/O (Type K), Iout(Active) x 1, P/Sout(Passive) x 1, Sin x 1, Iin(Active) x 1
	DP	BRAIN and IS I/O (Type P), Iout(Passive)x2, P/Sout(Passive)x1
	DQ	BRAIN and IS I/O (Type Q), Iout(Passive)x2, P/Sout(Passive)x2
	DR	BRAIN and IS I/O (Type R), Iout(Passive)x2, P/Sout NAMUR(Passive)x1
	DS	BRAIN and IS I/O (Type S), Iout(Passive)x2, P/Sout NAMUR(Passive)x2
	DT	BRAIN and IS I/O (Type T), Iout(Passive)x1, P/Sout(Passive)x1
	F0	FOUNDATION Fieldbus,
	G0	PROFIBUS PA
	JA	HART 7 and I/O (Type A), Iout(Active) x 1, P/Sout(Passive) x 1
	JB	HART 7 and I/O (Type B), Iout(Active) x 2, P/Sout(Passive) x 2
	JC	HART 7 and I/O (Type C), Iout(Active) x 2, P/Sout(Passive) x 1, Sin x 1
	JD	HART 7 and I/O (Type D), Iout(Active) x 1, P/Sout(Passive) x 2, Sout(Passive) x 1
	JE	HART 7 and I/O (Type E), Iout(Active) x 1, P/Sout(Passive) x 2, Sin x 1
	JF	HART 7 and I/O (Type F), Iout(Active) x 1, P/Sout(Passive) x 1, P/Sout(Active, with resistor) x 1, Sin x 1
	JG	HART 7 and I/O (Type G), Iout(Active) x 1, P/Sout(Passive) x 1, P/Sout(Active, without resistor) x 1, Sin x 1
	JH	HART 7 and I/O (Type H), Iout(Active) x 1, Iout(Passive) x 1, P/Sout(Passive) x 1, Iin(Active) x 1
	JJ	HART 7 and I/O (Type J), Iout(Active) x 1, P/Sout(Passive) x 2, Iin(Active) x 1
	JK	HART 7 and I/O (Type K), Iout(Active) x 1, P/Sout(Passive) x 1, Sin x 1, Iin(Active) x 1
	JP	HART and IS I/O (Type P), Iout(Passive)x2, P/Sout(Passive)x1
	JQ	HART and IS I/O (Type Q), Iout(Passive)x2, P/Sout(Passive)x2
	JR	HART and IS I/O (Type R), Iout(Passive)x2, P/Sout NAMUR(Passive)x1
	JS	HART and IS I/O (Type S), Iout(Passive)x2, P/Sout NAMUR(Passive)x2
	JT	HART and IS I/O (Type T), Iout(Passive)x1, P/Sout(Passive)x1
	M0	Modbus and I/O (Type 0), P/Sout(Passive) x 1
	M2	Modbus and I/O (Type 2), P/Sout(Passive) x 1, Iin(Active) x 1
	M6	Modbus and I/O (Type 6), P/Sout(Passive) x 1, Iout(Active) x 1
	NN	None (Remote Sensor)
	P0	EtherNet/IP
13 Transmitter Wiring Terminal (Please make one selection)
	1	M4 Screw Type
	2	Clamp Type
	N	None (Remote Sensor)
001 Grounding Ring
	/GRH	Grounding Rings (Plate Type H), Nickel Alloy, Thin Type
	/GRJ	Grounding Rings (Plate Type J), Nickel Alloy, Thick Type
	/GRL	Grounding Rings (Plate Type L), Stainless Steel 316L, Thin Type
	/GRN	Grounding Rings (Plate Type N), Stainless Steel 316L, Thick Type
	/GRP	Grounding Rings (Electrode Type P), Platinum-Iridium
	/GRT	Grounding Rings (Electrode Type T), Tantalum
	/GRV	Grounding Rings (Plate Type V), Titanium, Thin Type
	/GRW	Grounding Rings (Plate Type W), Titanium, Thick Type
002 Mass Unit Setting
	/MU	Mass Unit Setting
004 Tag Plate
	/SCT	Stainless Steel Tag Plate
005 Bolts, Nuts and Gaskets
	/BSC	Bolts, Nuts and Gaskets (Type C), Bolts: Stainless Steel 304, Nuts: Stainless Steel 304, Gaskets: Chloroprene Rubber
	/BSF	Bolts, Nuts and Gaskets (Type F), Bolts: Stainless Steel 304, Nuts: Stainless Steel 304, Gaskets: PTFE-sheathed Non-asbestos
006 Special Gaskets
	/GA	Plastic Pipe Gaskets
	/GC	Plastic Pipe Acid-resistant Gaskets
	/GD	Plastic Pipe Alkali-resistant Gaskets
	/GF	Metal Pipe Alkali-resistant Gaskets
007 Cable Entry Direction Change
	/RH	Cable Entry Direction Change
011 Oil Prohibition, Dehydration
	/K1	Oil-prohibited Use
	/K5	Oil-prohibited Use with Dehydration
012 Vent Hole
	/H	Vent Hole
016 Output Signal on Failure
	/C1	Output Signal on Failure (Low), Current Output (Alarm):2.4 mA or less
	/C2	Output Signal on Failure (Low, NE 43), Current Output (Alarm):2.4 mA or less, Output Signal Range: 3.8 to 20.5 mA
	/C3	Output Signal on Failure (High, NE 43), Current Output (Alarm):21.6 mA or more, Output Signal Range: 3.8 to 20.5 mA
017 microSD Card (Mandatory for Integral Flowtube)
	/MC	microSD Card
035 Functional Safety
	/SL	SIL Certification SIL2
036 Marine Type Approval
	/WCD	Marine Type Approval: DNV
040 Specified Flow Calibration
	/SC	Specified Span Five-point Calibration
050 Calibration Certificate
	/L2	Calibration Certificate (Level 2), Declaration and Calibration Equipment List
051 Material Certificate
	/M01	Material Certificate
052 Hydrostatic Test
	/T01	Hydrostatic Test
060 Regional Standard etc.
	/CS	Canada Domestic Sales

Your Product

Subgroup | Page

ADMAG | Integral/Remote Flowtube PFA Lining

Model

AXG005

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	Price pages are for price reference only, Refer the General Specification for correct model code configurations and descriptions. Specify the Model Number.
How to build MS Code	Choosing one code from each section. Multiple codes can be chosen form the "Options Section".
Example MS Code	AXG080-GA000BA1AL212B-1JB11/PM/MC/SCT/GRL/M01/L2
Pricing	Total the base price and add the price adders to arrive at a list price.
Delivery	Consult published standard lead times. The quantity ordered as well as any options may affect delivery. Please consult the factory for a more accurate delivery date.

**Product Notes**
Note Id	Description
1	Please consult Factory for lead times. Some options are delivered from Japan ONLY.
2	Includes calibration certificate and flowtest traceable report. Meters manufactured and tested at YCA are traceable to NIST. Meters manufactured and tested in Japan or China are traceable to the National Institute of Advanced Industrial Science and Technology (AIST).
3	Choose only with integral meter.
4	Choose only with Remote meter.
5	Only for 0.1 to 8 in. (2.5 to 200 mm)
6	Not available for 1.25, 2.5, and 5 in. (32, 65, and 125 mm).
7	Not available for 0.1, 0.2 and 0.4 in. (2.5, 5 and 10 mm).
8	Change the length of signal cable and excitation cable pre-wired with optional code DHC. The maximum cable length is 100 m in combination with the AXG4A transmitter, and 200 m in combination with the AXFA11 transmitter. When optional code L### is not selected, a 30-meter length signal cable and excitation cable are pre-wired.
9	Mandatory combination selection for Grounding rings.
10	Only for 0.1 to 8 in. (2.5 to 200 mm). The mounting bolts, nuts and gaskets of wafer type (process connection code AA1).
11	Please check the table of Applicable Condition for Grounding Devices and Gaskets at General Specification.
12	Mandatory for FM approval type FT2, FJ2, CT2 and CJ2.
13	Only for I/O type #P/#Q/#R/#S/#T.
14	Only for I/O type F0 or G0.
15	Consult Factory if end-user is using with DeltaV
16	Only for Display code: 3 or N.
17	Only for Use -G (General-purpose). Only for Construction A, G (Integral, AXG4A). Only for Communication and I/O J#, M# (HART, Modbus). AX01C maximum cable length up to 15feet due to restrictions on the certification range.
18	Can not be combined with Communication and I/O M#, F0, G0, P0. Can not be combined with DC Noise Cut Circuit ELC.

AXG005 Magnetic Flowmeter (5mm/0.2in.)

14 Display (Mandatory for Integral Flowtube) (Please make one selection)

01 Use (Please make one selection)

02 Construction (Please make one selection)

03 Explosion Protection (Please make one selection)

04 Process Connection (Please make one selection)

05 Lining

06 Electrode (Please make one selection)

07 Grounding Device (Please make one selection)

08 Housing and Coating (Please make one selection)

09 Cable Entry (Please make one selection)

10 Accuracy

11 Power Supply (Please make one selection)

12 Communication and I/O (Please make one selection)

13 Transmitter Wiring Terminal (Please make one selection)

001 Grounding Ring

002 Mass Unit Setting

004 Tag Plate

005 Bolts, Nuts and Gaskets

006 Special Gaskets

007 Cable Entry Direction Change

011 Oil Prohibition, Dehydration

012 Vent Hole

016 Output Signal on Failure

017 microSD Card (Mandatory for Integral Flowtube)

035 Functional Safety

036 Marine Type Approval

040 Specified Flow Calibration

050 Calibration Certificate

051 Material Certificate

052 Hydrostatic Test

060 Regional Standard etc.

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

14 Display (Mandatory for Integral Flowtube)
(Please make one selection)

01 Use
(Please make one selection)

02 Construction
(Please make one selection)

03 Explosion Protection
(Please make one selection)

04 Process Connection
(Please make one selection)

06 Electrode
(Please make one selection)

07 Grounding Device
(Please make one selection)

08 Housing and Coating
(Please make one selection)

09 Cable Entry
(Please make one selection)

11 Power Supply
(Please make one selection)

12 Communication and I/O
(Please make one selection)

13 Transmitter Wiring Terminal
(Please make one selection)