YCA Store | Products | Analytical | SC Conductivity Sensors & Holders | MODEL SC42 | SC42

Loading...

Product Categories

#	Model/Spec/Part No.	Description	CF	Pref		Notes
SC42 CONDUCTIVITY SENSOR Pt 1000 Temperature Element
01 Construction (Please make one selection)
	-SP	SS, plug-in, plug-socket conn, IS ATEX /IECEx/FM-US/FM-CAN/NEPSI/PESO/TS/EACEx				1
	-EP	Epoxy plug-in, plug-socket conn, IS ATEX /IECEx/FM-US/FM-CAN/NEPSI/PESO/TS/EACEx				1
	-FP	PVDF, plug-in, plug-socket conn, IS ATEX /IECEx/FM-US/FM-CAN/NEPSI/PESO/TS/EACEx				1
	-FV	PVDF, plug-in, Variopin+ID-chip, IS ATEX /IECEx/FM-US/FM-CAN/NEPSI/PESO/TS/EACEx
	-SV	SS, plug-in, Variopin+ID-chip, IS ATEX /IECEx/FM-US/FM-CAN/NEPSI/PESO/TS/EACEx
	-TP	PTFE, plug-in, plug-socket conn, IS ATEX /IECEx/FM-US/FM-CAN/NEPSI/PESO/TS/EACEx				1
	-TV	PTFE, plug-in, Variopin+ID-chip, IS ATEX /IECEx/FM-US/FM-CAN/NEPSI/PESO/TS/EACEx
02 Cell constant value (Please make one selection)
	24	Can only be used with the -S* material; 2-Electrode Flow Sensor, Constant = 0.1/cm				1
	34	Can only be used with the -S* material; 2-Electrode Flow Sensor, Constant = 0.01/cm				1
	04	Can only be used with the -EP material; 2-Electrode Flow Sensor, Constant = 10/cm				1
	08	Can only be used with the -T* or -F* material; 4-Electrode Flow Sensor, Constant = 10.0/cm (Not for use with DC402)				1
	15	Can only be used with the -EP material; 2-Electrode Insertion Sensor, Constant = 1.0/cm				1
	18	Can only be used with the -EP material; 4-Electrode Flow Sensor, Constant = 1.0/cm (Not for use with DC402)				1

Parts / Accessories

(Multiple selections allowed, creates separate lines on the quote.)

Your Product

Category

Analytical

Subgroup | Page

SC Conductivity Sensors & Holders | MODEL SC42

Model

SC42

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to build MS Code	Specify the Model Number, add the Materials of Construction Code selection to the Model Number and total the prices to arrive at list price.
Product Notes	Material Certificate Not included with the unit. If a Material Certificate is required for SS version, the Batch Number of the material is provided on the quality cert that comes in the box with the sensor. They can take this batch number and go to the page below and look up the material certificate. http://www.yokogawa.com/eu/an/analytical/eu-material-cert.htm 4-Electrode sensors do not operate with the DC402.
Cell Constants	Sensor Cell Constants MUST match the desired measurement range. For FLXA402, FLXA202, SC202, SC402, and SC150 CONSTANT RANGE 0.01/cm .01 - 2,000 μS 0.1/cm .1 - 20,000 μS 1.0/cm (-EP15) 1.0 - 50,000 μS (-EP18) 1.0 - 5,000,000 μS 10.0/cm (-EP04) 10.0 - 2,000,000 μS (-**08) 10.0 - 10,000,000 μS For DC402 CONSTANT RANGE 0.01/cm .02 - 250 μS 0.1/cm .2 - 2,500 μS 1.0/cm 2.0 - 25,000 μS 10.0/cm 20.0 - 250,000 μS
Cable	For plug-in type (-P), use the WU40 cable. For Variopin type (-V), use the WU10 cable.
Mounting	A FF40 or FS40 is required to properly mount the sensor into the process. To mount in Immersion, use the FS40 holder and flip it upside down to yield a 1 1/4" NPT thread, where a pipe can be attached.
How to Order	See additional Note at the bottom for combination possibilities
Example MS Code	SC42-SP24; SC42-SV24; SC42-SP34; SC42-SV34; SC42-EP04; SC42-EP15; SC42-EP18; SC42-FP08; SC42-TP08
Preferred Models	* (asterisk) Model codes including all * markers are available for quick delivery. Consult factory for more information.
Additional Ordering Instructions	Order Construction & Cell Constant in the following combinations: -SP34 2-Electrode Flow Sensor, 316 Stainless Steel Constant = 0.01/cm -SV34 2-Electrode Flow Sensor, 316 Stainless Steel Constant = 0.01/cm -SP24 2-Electrode Flow Sensor, 316 Stainless Steel Constant = 0.1/cm -SV24 2-Electrode Flow Sensor, 316 Stainless Steel Constant = 0.1/cm -EP04 2-Electrode Flow Sensor, Epoxy Constant = 10/cm -EP15 2-Electrode Insertion Sensor, Epoxy Constant = 1.0/cm -EP08 4-Electrode Flow Sensor Epoxy Constant = 10.0/cm (Not for use with DC402) -EP18 4-Electrode Flow Sensor Epoxy Constant = 1.0/cm (Not for use with DC402) -FP08 4-Electrode Flow Sensor PVDF (Kynar) Constant = 10.0/cm (Not for use with DC402) -FV08 4-Electrode Flow Sensor PVDF (Kynar) Constant = 10.0/cm (Not for use with DC402) -TP08 4-Electrode Flow Sensor PTFE (Teflon) Constant = 10.0/cm (Not for with DC402) -TV08 4-Electrode Flow Sensor PTFE (Teflon) Constant = 10.0/cm (Not for with DC402)
Conductivity Cells	The Conductivity Cells on this page are the large bore cells 30mm in diameter. See other pages for the 12mm(small bore) series and the 19mm series (SC4A).

**Product Notes**
Note Id	Description
1	See "Additional Ordering Instructions". Please note that the -FP04 and -TP04 version was terminated in 2017 and should be replaced with the 4-electrode -FP08 and -TP08.
2	/M Material certificate is no longer called out. The QIC has the heat trace numbers on the certificates that can be pulled for the material certificates in the customer portal.