YCA Store | Products | Flowmeters | YEWFLO | digitalYEWFLO

Product Categories

#	Model/Spec/Part No.	Description	Notes
DY300 12 Inch ID			13
01 Amp (Please make one selection)
	-D	4 to 20mA DC, Pulse, BRAIN Communication	1,16
	-E	4 to 20mA DC, Pulse, HART 5 Communication	1,16
	-F	Digital communication (Foundation Fieldbus protocol)	6,16
	-J	4 to 20mA DC, Pulse, HART 7 Communication	1,16
	-N	Remote Type Detector	2
02 Body Material
	B	CF8M
03 Shedder Material
	L	Duplex Stainless Steel
04 Process Connection (Please make one selection)
	AA1	ANSI 150 Wafer Type
	AA2	ANSI 300 Wafer Type
	BA1	ANSI 150 Flange type (Raised Face)
	BA2	ANSI 300 Flange type (Raised Face)
05 Electrical Connection (Please make one selection)
	-2	ANSI 1/2NPT Female
	-4	ISO M20x1.5 Female
06 Indicator (Please make one selection)
	D	With Indicator
	N	None Indicator
001-003 Optional Features
	/L2	Calibration Certificate, Level 2 Declaration and Calibration Equipment List	10
001-003 Optional Features
	/X1	Epoxy Coating
004A Certification
	/CF1	CSA Explosion proof	16
	/CF11	CSA Explosion proof : DUAL SEAL	16
	/CS1	CSA Intrinsically Safe Ex ia IIC T4...T1 and Ex nC IIC T4...T1 (Integral) Ex ia IIC T4 and Ex nC IIC T4 (Remote)	16
	/CS11	CSA Intrinsically Safe: DUAL SEAL Ex ia IIC T4...T1 and Ex nC IIC T4...T1 (Integral) Ex ia IIC T4 and Ex nC IIC T4 (Remote)	16
	/FF1	FM Explosion proof
	/FS1	FM Intrinsically Safe / Nonincendive
	/FS16	FM Intrinsically Safe for FOUNDATION Fieldbus Communication Type AEx ia IIB/IIC, T4, Entity, FISCO and Nonincendive, FNICO
	/KF2	ATEX Flameproof Approval	18
	/KN2	ATEX Type n Approval	16,18
	/KS2	ATEX Intrinsically Safe Approval Ex ia IIC T4...T2 (Integral) Ex ia IIC T6...T1 (Remote)	18
	/KS28	ATEX Intrinsically Safe Approval II 1 G Ex ia IIC T4 Ga (Integral) II 1 G Ex ia IIC T6 Ga (Remote)	18
004A Certification
	/KN26	ATEX Intrinsically Safe Approval Ex ic for FOUNDATION Fieldbus Communication Type	18
005-030 Optional Features
	/A	Lightning Protector	4
005-030 Optional Features
	/CRC	Converter Installing Direction 180 deg. Change
005-030 Optional Features
	/E01	Material Certificate(3.1B)(body)
	/E02	Material Certificate(3.1B)(body/shedder)
	/E03	Material Certificate(3.1B)(body/shedder bottom plug)
	/E04	Material Certificate(3.1B)(body/shedder/ bottom plug/welding rod)
005-030 Optional Features
	/E1	Stainless steel amplifier housing	17
005-030 Optional Features
	/EE	Software Download (for FOUNDATION Fieldbus Protocol)	7
005-030 Optional Features
	/K1	Degrease Treatment
005-030 Optional Features
	/LC1	PID Function	7
005-030 Optional Features
	/M01	Material Certificate	11
005-030 Optional Features
	/M04	Material Certificate(Mill sheet) (Body/Shedder/Bottom plug/Welding rod)	12
005-030 Optional Features
	/NM	Compliance with NAMUR43 Output signal limits: 4 mA to 20.5 mA Output status at CPU failure and hardware error is -2.5%, 3.6 mA or less.	4,21
005-030 Optional Features
	/PM1	PMI test certificate(Body)
	/PM2	PMI test certificate(Body/Shedder)
005-030 Optional Features
	/PT	Dye Penetrant test certificate (Welded portion for the bottom plug and the flange)
005-030 Optional Features
	/SCT	Stainless Steel Tag Plate	5
005-030 Optional Features
	/T01	Static Pressure and Leakage Test Certificate	8
005-030 Optional Features
	/T02	Hydrostatic pressure test certificate	9
005-030 Optional Features
	/WP	WQ,WPS,PQR(Welded portion for the bottom plug and flange)
005-030 Optional Features
	/X2	Pilling up coating to keep off corrosion
032 Optional Features
	/SPG	Silver Plated Gasket

Your Product

Subgroup | Page

YEWFLO | digitalYEWFLO

Model

DY300

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	MODEL NUMBER: specify the Model Number by choosing one code from each section, multiple codes can be chosen from the "Options" section. OPTIONS: Must be listed in the sequence shown in the options section.
How to build MS Code	Specify the Model Number by choosing one code from each section, multiple codes can be chosen from the "Options" Section"
Pricing	Total the amount shown to arrive at a list price.
Delivery	Please Consult Your Order Analyst for Delivery.
Documents	The programming sheet produced by the Digital YEWFLO. Sizing Program MUST be included with your order. For other documents, see the documents section of these price sheets. General Specifications GS01F06A00-01E-A Instruction Manual
PRESSURE LIMITS (psig) per ANSI B16.5	TEMP ANSI CF8M FLANGE RATING (PSIG) ---- ANSI CARBON STEEL RATING (°F) 150# 300# 600# 900# ---- (°F) 150# 300# 400# 600# 900# <100 275 720 1440 2160 ---- -20 to 100 285 740 985 1480 2220 200 235 620 1240 1860 ---- 200 260 680 905 1360 2039 300 215 560 1120 1680 ---- 300 230 655 870 1310 1965 400 195 515 1025 1540 ---- 400 200 635 845 1265 1900 500 170 480 955 1435 ---- 500 170 605 805 1205 1810 600 140
MISC	Description (Standard Meter) CF8M SS Body, Duplex SS Shedder Bar, Teflon-coated SS shedder bar gasket. Electronic housing is NEMA 4X with ANSI 0.5" FNPT Electrical Connection. Simultaneous 4-20 mA DC Pulse output. Digital Indicator/Display is optional. Wafer style meters are supplied with one set of carbon steel bolts,nuts and centering hardware. Communications; FM Explosion Proof Certification and Stainless Steel tag. Note: If no tag number is advised, tag will be left blank

**Product Notes**
Note Id	Description
1	Output may be 4-20 mA and Pulse.
2	Unit will not function unless connected to a DYA Converter.
3	Available on wafer style Meters Only.
4	Option follows electronics. If Remote converter (-N) is selected option can be selected on DYA
5	Includes stamping of customer supplied code on the tag. Maximum length 24 characters x 2 lines. If a blank tag is wanted, the order MUST state "Blank Tag",
6	Not Available with CSA I.S. Certification
7	Applicable with Foundation Fieldbus (-F) only.
8	Nitrogen Pressure Test is done as a standard procedure on all 0.5" thru 8" 150# and 300# meters. Also for 0.5" thru 1.5" 600# meters. All other sizes and flange ratings are hydrostatic pressure tested.
9	Hydrostatic Pressure Test (water) is done as a standard procedure on 10" & 12" 150# and 300# and 2" thru 8" 600# and 900# meters. Other sizes and flange ratings can be hydro tested by using this option.
10	Includes calibration certificate and flowtest traceable report. Meters manufactured and tested at YCA are traceable to NIST.
11	Body CMTR: Foundry test and certificate attesting to the composition of body casting with an endorsement by Yokogawa giving the S/N of the meter in which the casting was used.
12	Wetted CMTR: Same as body CMTR with the additional certificates for the shedder bar, plug and welding material.
13	No /MV option available
14	Reduction meters available in 150# BA1 and 300# BA2 flanges only
15	Call Factory for lead time. Not available with /R1 or /R2 option
16	Not available with option /E1
17	Only available with Remote Units. Select Shedder Material as "L" . Only Available with stainless steel body.
18	Must Select Shedder Bar Material "L"
19	Only for use with /KF2, /KS2 and /E1
20	Sizes DY025 to DY200 only; Larger size require tokuchu
21	Not for Fieldbus Foundation
22	Not available for high temperature, cryogenic, and anti-corrosion type
23	PMI test certificate for meterbody
24	PMI test certificate for meterbody and shedder bar,
25	Dye Penetrant test certificate
26	Material Certificate:3.1 (3.1 certificate to be attached according to EN10204); meterbody
27	Material Certificate:3.1 (3.1 certificate to be attached according to EN10204); meterbody & shedder bar
28	Material Certificate:3.1 (3.1 certificate to be attached according to EN10204); meterbody & shedder bar & bottom plug
30	NACE Material /NC can not combine with ASME welding documents submission /WP.
29	Material Certificate:3.1 (3.1 certificate to be attached according to EN10204); meterbody & shedder bar & bottom plug & welding rod

DY300 12 Inch ID

01 Amp (Please make one selection)

02 Body Material

03 Shedder Material

04 Process Connection (Please make one selection)

05 Electrical Connection (Please make one selection)

06 Indicator (Please make one selection)

001-003 Optional Features

001-003 Optional Features

004A Certification

004A Certification

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

032 Optional Features

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Amp
(Please make one selection)

04 Process Connection
(Please make one selection)

05 Electrical Connection
(Please make one selection)

06 Indicator
(Please make one selection)