YCA Store | Products | Flowmeters | ROTAMASS | RotaMASS Intense + Essential

Product Categories

#	Model/Spec/Part No.	Description	Notes
RCET36S Qnom = 10 t/h (370 lb/min)
01 Process Connection (Please make one selection)
	-25BA5	1" ASME flange class 900, process connection dimension and facing according ASME B16.5	1
	-25CA5	1" ASME flange class 900, process connection dimension and facing according ASME B16.5, ring joint	1
	-50BA5	2" ASME flange class 900, process connection dimension and facing according ASME B16.5	1
	-50CA5	2" ASME flange class 900, process connection dimension and facing according ASME B16.5, ring joint	1
02 Sensor housing material (Please make one selection)
	0	sensor housing material SUS 304 (1.4301)
	1	sensor housing material SUS 316L(1.4404)
03 Medium temperature range
	-0	standard process fluid temperature range integral: -50 to 150°C (-58 to 302 °F) remote: -70 to 150°C (-56,7 to 302 °F)
04 Mass flow and density accuracy (Please make one selection)
	70	G: 0,75% m flow gas: 0,75% mass flow accuracy
	D7	L: 0,15% m flow+4 kg/m³ liquid: 0,15% mass flow accuracy and 4 kg/m³ density accuracy
	E7	L: 0,2% m flow+4 kg/m³ liquid: 0,2% mass flow accuracy and 4 kg/m³ density accuracy
05 Design and housing (Please make one selection)
	0	I:AL housing UP paint integral: low copper aluminium housing urethane-cured polyester powder coating	2
	2	I:AL housing corrosion paint integral: low copper aluminium housing corrosion protection coating	2
	A	R:AL UP+SS std-neck remote: low copper aluminium housing urethane-cured polyester powder coating SS terminal housing standard neck
	B	R:AL UP+SS long-neck remote: low copper aluminium housing urethane-cured polyester powder coating SS terminal housing long neck
	E	R:AL corr paint+ std-neck remote: low copper aluminium housing corrosion protection coating SS terminal housing standard neck
	F	R:AL corr paint+SS long-neck remote: low copper aluminium housing corrosion protection coating SS terminal housing long neck
	J	R:SS trans+SS std-neck remote: stainless steel housing stainless steel terminal housing standard neck	11
	K	R:SS trans+SS long-neck remote: stainless steel housing stainless steel terminal housing long neck	11
06 Ex approval (Please make one selection)
	-FF11	FM XP tra+IS sen ABCDEFG FM approval for USA and Canada explosionproof transmitter and intrinsic safe sensor (GP ABCDEFG)
	-FF12	FM XP tra+IS sen CDEFG FM approval for USA and Canada explosionproof transmitter and intrinsic safe sensor (GP CDEFG)
	-NN00	non Ex proof	4
07 Cable entries
	-2	ANSI 1/2 in. NPT
08 Communication type and I/O (Please make one selection)
	-JA	IOa, PLp 1 active current output HART, 1 passive pulse output or status output
	-JB	IOa, PLp, PLp, IOa 2 active current output HART 2 passive pulse output or status output
	-JC	IOa, PLp, DI, IOa 2 active current output HART 1 passive pulse output or status output 1 voltage-free digital input
	-JD	IOa, PLp,STp, PLp 1 active current output HART 2 passive pulse output or status output 1 passive status output
	-JE	IOa, PLp, DI, PLp 1 active current output HART 2 passive pulse output or status output 1 voltage-free digital input
	-JF	IOa, PLp, DI, PLa pull-up 1 active current out HART, 1 passive pulse or statusout,1active pull-up pulse or statusout,1voltage-free digital input
	-JG	IOa, PLp, DI, PLa 1 active current out HART, 1 passive pulse or status out, 1 active pulse or status out, 1 voltage-free digital input
	-JP	IOp, PLp, IOp 1 passive current output HART, 1 passive pulse output or status output, 1 passive current output,	3
	-JQ	IOp, PLp, IOp, PLp 1 passive current output HART, 2 passive pulse output or status output, 1 passive current output	3
	-JR	IOp, NamPLp, IOp, 1 passive current output HART, 1 passive Namur pulse or status output, 1 passive current output	3
	-JS	IOp, NamPLp, IOp, NamPLp 1 passive current output HART, 2 passive Namur pulse or status output, 1 passive current output	3
	-M0	MB, PLp 1 passive pulse output or status output, Modbus	12
	-M3	MB, PLp, PLp 2 passive pulse output or status output, Modbus	12
	-M4	MB, PLa, PLp 1 active pulse output or status output, 1 passive pulse output or status output, Modbus	12
	-M5	MB, PLa pull-up, PLp 1 active pulse ouput or status output with internal pull-up resistor, 1 passive pulse out or status out,Modbus	12
	-M6	MB, IOa, PLp 1 active current output, 1 passive pulse output or status output, Modbus	12
09 Display
	1	with display
002 Add. namplate information
	/BG	Tag number on nameplate Customer-specific tag number on nameplate
003 Pre-setting custom. Param.
	/PS	Presetting sel. parameters Presetting of selected parameters based on customer data
005 Country-specific appl.
	/CS	CRN Canadian Registration Number CRN
007 Rupture disc
	/RD	rupture disk rupture disk
008 Customer-specific calibr.
	/K2	5 pt calibr+factory cert Customized 5 point mass-/volume-flow calibration using water with factory certificate
	/K5	10 pt calibr+Dakks cert Customized 10 point mass-/volume-flow calibration using water with DAkkS certificate
009 Certificate of Compliance
	/P2	2.1 certificate EN 10204 Declaration of compliance with the order 2.1 acc. EN 10204
	/P3	3.1 certificate EN 10204 Inspection certificate 3.1 acc. EN 10204 (QIC)
010 material certificates
	/P6	material certificate acc. to EN 10204: 2004 -3.1 incl. IGC conform to NACE MR0175, MR0103
012 Pressure testing
	/P8	Pressure test certificate Pressure test certificate
013 Surface oil & grease free
	/H1	Degreasing wetted surfaces Degreasing of wetted surfaces acc. ASTM G93/G93M-19, level C, test report
014 welding certificate
	/WP	incl.: WPS, WPQR, WQC WPS according DIN EN ISO 15609-1 WPQR according DIN EN ISO 15614-1 WQC according DIN EN 287-1 and ISO6906-4	6
	/WPA	Weld. proced. acc ASME IX Welding procedures and certificate welding according ASME IX	7
016 ASME B31.3 compliance
	/P15	ASME B31.3 NORM FLU. SER ASME B31.3 compliance NORMAL FLUID SERVICE	7
	/P16	ASME B31.3 Cat M FLU. SER ASME B31.3 compliance Category M FLUID SERVICE
017 X-ray insp. flg. weld seam
	/RT	X-ray test flange weld X-ray examination of flange welding acc. DIN EN ISO 17636-1/B, AD2000 HP 5/3 DIN EN ISO 5817/C, including certificate	6
	/RTA	X-ray test acc. ASME V Dye penetrant test of flange welding acc. ASME V including test report	7
018 PMI of wetted parts
	/PM	PMI test PMI test for pressure containing parts, including certificate
019 Dye penetr. test weld seam
	/PT	Dye pen test flange weld Dye penetrant test of flange welding, acc. DIN EN ISO 3452-1 including test report
	/PTA	Dye pen. test acc ASME V Dye penetrant test of flange welding acc. ASME V including test report	7
020 combined certificate
	/P20	comb /PTA+/WPA+/RTA Dye Penetrant test for flange acc ASME V welding procedure for flange acc ASME IX X-ray test according ASME V	8
	/P21	comb /P10+/P20 Quality Inspection Cert.(QIC), cert. of marking transfer, pressure test cert. , ASME cert. Package	13, 15
	/P22	comb /P11+/P20 Quality Insp. Cert.(QIC), cert. of marking transfer, ASME cert. Package, PMI test of pressure containing parts	14, 15
021 Tube health check
	/TC	Tube health check Tube health check
024 Transmitter rotated 180°
	/RB	180° rotatable term box 180 degrees rotated terminal box
034 Connect. cable type + len.
	/L000	No std connecting cab No standard connecting cable separate order for standard sensor cable	5
	/L005	5m (16,4 ft) std cab 5 meter (16,4 ft) remote sensor cable terminated non Ex black / Ex blue	5
	/L010	10m (32,8 ft) std cab 10 meter (32,8 ft) remote sensor cable terminated non Ex black / Ex blue	5
	/L015	15m (49,2 ft) std cab 15 meter (49,2 ft) remote sensor cable terminated non Ex black / Ex blue	5
	/L020	20m (65,6 ft) std cab 20 meter (65,6 ft) remote sensor cable terminated non Ex black / Ex blue	5
	/L030	30m (98,4 ft) std cab 30 meter (98,4 ft) remote sensor cable terminated non Ex black / Ex blue	5
040 Steel arm. connect. cable
	/LAC	Steel armored cable Steel armored version of standard connecting cable

Your Product

Subgroup | Page

ROTAMASS | RotaMASS Intense + Essential

Model

RCET36S

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	Price pages are for price reference only. Refer to Flow Configurator for correct model code configurations and descriptions.

**Product Notes**
Note Id	Description
1	Refer to flow configurator or general specification on what sizes can be combined with your flow tubes
2	not with option L0??
3	only with Ex approval KF2?, SF2?, FF1?
4	not with JP, JQ, JR, JS
5	Can not be combined with design and housing 0, 2 or option MC2, MC3
6	Can not be combined with P15 or P20
7	Can not be combined with WP, RT, PT, T??, Only for Process connection BA or CA.
8	Can not be combined with WP, RT, PT, WPA, RTA, PTA
9	Not with design and housing 0, 2, communication type and I/O JP, JQ, JR, JS. Can only go with option code Y???.
10	Can not be combined with design and housing 0, 2 or FF11, FF12
11	Can not combined with option RB.
12	Can not be combined with option PS.
13	Not with option P3, P6, P8, WP, WPA, RT, RTA, PT, PTA
14	Not with option P3, P6, WP, WPA, RT, RTA, PT, PTA, PM
15	Only combined with process connection type BA?? & CA??
16	Only available for ASME Flange (BA@ or CA@)
17	Not available with FM approval
18	Can not be combined with design and housing J, K (Stainless steel)

RCET36S Qnom = 10 t/h (370 lb/min)

01 Process Connection (Please make one selection)

02 Sensor housing material (Please make one selection)

03 Medium temperature range

04 Mass flow and density accuracy (Please make one selection)

05 Design and housing (Please make one selection)

06 Ex approval (Please make one selection)

07 Cable entries

08 Communication type and I/O (Please make one selection)

09 Display

002 Add. namplate information

003 Pre-setting custom. Param.

005 Country-specific appl.

007 Rupture disc

008 Customer-specific calibr.

009 Certificate of Compliance

010 material certificates

012 Pressure testing

013 Surface oil & grease free

014 welding certificate

016 ASME B31.3 compliance

017 X-ray insp. flg. weld seam

018 PMI of wetted parts

019 Dye penetr. test weld seam

020 combined certificate

021 Tube health check

024 Transmitter rotated 180°

034 Connect. cable type + len.

040 Steel arm. connect. cable

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Process Connection
(Please make one selection)

02 Sensor housing material
(Please make one selection)

04 Mass flow and density accuracy
(Please make one selection)

05 Design and housing
(Please make one selection)

06 Ex approval
(Please make one selection)

08 Communication type and I/O
(Please make one selection)