YCA Store | Products | Flowmeters | ROTAMASS | RotaMASS Supreme + Ultimate - Hastelloy

Product Categories

#	Model/Spec/Part No.	Description	Notes
RCUS34H Qnom = 3 t/h (110 lb/min)
01 Process Connection (Please make one selection)
	-25BA1	1" ASME flange class 150, process connection dimension and facing according ASME B16.5	1
	-25BA2	1" ASME flange class 300, process connection dimension and facing according ASME B16.5	1
	-25BA4	1" ASME flange class 600, process connection dimension and facing according ASME B16.5	1
	-40BA1	1 1/2" ASME flange class 150, process connection dimension and facing according ASME B16.5	1
	-40BA2	1 1/2" ASME flange class 300, process connection dimension and facing according ASME B16.5	1
	-40BA4	1 1/2" ASME flange class 600, process connection dimension and facing according ASME B16.5	1
	-50BA1	2" ASME flange class 150, process connection dimension and facing according ASME B16.5	1
	-50BA2	2" ASME flange class 300, process connection dimension and facing according ASME B16.5	1
	-50BA4	2" ASME flange class 600, process connection dimension and facing according ASME B16.5	1
02 Sensor housing material (Please make one selection)
	0	sensor housing material SUS 304 (1.4301)
	1	sensor housing material SUS 316L(1.4404)
03 Medium temperature range (Please make one selection)
	-0	standard process fluid temperature range integral: -50 to 150°C (-58 to 302 °F) remote: -70 to 150°C (-56,7 to 302 °F)
	-2	mid temperature process fluid temperature range remote: -70 to 230°C (-56,7 to 446 °F)	2
	-3	high temperature process fluid temperature range remote: 0 to 350°C (32 to 662 °F)	2,19
04 Mass flow and density accuracy (Please make one selection)
	50	G: 0,5% m flow gas: 0,5% mass flow accuracy	3
	C2	L: 0,1% m flow+0.5 kg/m³ liquid: 0,1% mass flow accuracy and 0.5 kg/m³ density accuracy	9
	C3	L: 0,1% m flow+1,0 kg/m³ liquid: 0,1% mass flow accuracy and 1,0 kg/m³ density accuracy	9
	C6	L: 0,1% m flow+3 kg/m³ liquid: 0,1% mass flow accuracy and 3 kg/m³ density accuracy
	D7	L: 0,15% m flow+4 kg/m³ liquid: 0,15% mass flow accuracy and 4 kg/m³ density accuracy
	E7	L: 0,2% m flow+4 kg/m³ liquid: 0,2% mass flow accuracy and 4 kg/m³ density accuracy
05 Design and housing (Please make one selection)
	0	I:AL housing UP paint integral: low copper aluminium housing urethane-cured polyester powder coating	4
	2	I:AL housing corrosion paint integral: low copper aluminium housing corrosion protection coating	4
	A	R:AL UP+SS std-neck remote: low copper aluminium housing urethane-cured polyester powder coating SS terminal housing standard neck
	B	R:AL UP+SS long-neck remote: low copper aluminium housing urethane-cured polyester powder coating SS terminal housing long neck
	E	R:AL corr paint+ std-neck remote: low copper aluminium housing corrosion protection coating SS terminal housing standard neck
	F	R:AL corr paint+SS long-neck remote: low copper aluminium housing corrosion protection coating SS terminal housing long neck
	J	R:SS trans+SS std-neck remote: stainless steel housing stainless steel terminal housing standard neck	10
	K	R:SS trans+SS long-neck remote: stainless steel housing stainless steel terminal housing long neck	11
06 Ex approval (Please make one selection)
	-FF11	FM XP tra+IS sen ABCDEFG FM approval for USA and Canada explosionproof transmitter and intrinsic safe sensor (GP ABCDEFG)
	-FF12	FM XP tra+IS sen CDEFG FM approval for USA and Canada explosionproof transmitter and intrinsic safe sensor (GP CDEFG)
	-NN00	non Ex proof	5
07 Cable entries
	-2	ANSI 1/2 in. NPT
08 Communication type and I/O (Please make one selection)
	-F0	FF FOUNDATION Fieldbus 1 passive pulse output
	-F1	FF IS FOUNDATION Fieldbus intrinsic save 1 passive pulse output
	-G0	PA non IS Profibus PA 1 passive pulse output
	-G1	PA IS Profibus PA intrinsic save 1 passive pulse output
	-JA	IOa, PLp 1 active current output HART, 1 passive pulse output or status output	6
	-JB	IOa, PLp, PLp, IOa 2 active current output HART 2 passive pulse output or status output	6
	-JC	IOa, PLp, DI, IOa 2 active current output HART 1 passive pulse output or status output 1 voltage-free digital input	6
	-JD	IOa, PLp,STp, PLp 1 active current output HART 2 passive pulse output or status output 1 passive status output	6
	-JE	IOa, PLp, DI, PLp 1 active current output HART 2 passive pulse output or status output 1 voltage-free digital input	6
	-JF	IOa, PLp, DI, PLa pull-up 1 active current out HART, 1 passive pulse or statusout,1active pull-up pulse or statusout,1voltage-free digital input	6
	-JG	IOa, PLp, DI, PLa 1 active current out HART, 1 passive pulse or status out, 1 active pulse or status out, 1 voltage-free digital input	6
	-JH	IOa, PLp, IOp, IIa 1 active current output HART 1 passive pulse or status out, 1 active current input, 1 passive current out
	-JJ	IOa, PLp, PLp, IIa 1 active current output HART 2 passive pulse output or status output, 1 active current input
	-JK	IOa, PLp, DI, IIa 1 active current output HART, 1 passive pulse or status output, 1 active current input, 1 voltage-free digital input
	-JL	IOa, PLp, IOp, IIp 1 active current output HART, 1 passive pulse or status out, 1 passive current output, 1 passive current input
	-JM	IOa, PLp, PLp, IIp 1 active current output HART, 2 passive pulse output or status output, 1 passive current input
	-JN	IOa, PLp, DI, IIp 1 active current output HART, 1 passive pulse or status out,1 voltage-free digital input, 1 passive current input
	-JP	IOp, PLp, IOp 1 passive current output HART, 1 passive pulse output or status output, 1 passive current output,	6,7
	-JQ	IOp, PLp, IOp, PLp 1 passive current output HART, 2 passive pulse output or status output, 1 passive current output	6,7
	-JR	IOp, NamPLp, IOp, 1 passive current output HART, 1 passive Namur pulse or status output, 1 passive current output	6,7
	-JS	IOp, NamPLp, IOp, NamPLp 1 passive current output HART, 2 passive Namur pulse or status output, 1 passive current output	6,7
	-M0	MB, PLp 1 passive pulse output or status output, Modbus	12
	-M2	MB, IIa, PLp 1 active current input, 1 passive pulse output or status output, Modbus	12
	-M3	MB, PLp, PLp 2 passive pulse output or status output, Modbus	12
	-M4	MB, PLa, PLp 1 active pulse output or status output, 1 passive pulse output or status output, Modbus	12
	-M5	MB, PLa pull-up, PLp 1 active pulse ouput or status output with internal pull-up resistor, 1 passive pulse out or status out,Modbus	12
	-M6	MB, IOa, PLp 1 active current output, 1 passive pulse output or status output, Modbus	12
	-M7	MB, IIp, PLp 1 passive current input, 1 passive pulse output or status output, Modbus	12
09 Display
	1	with display
002 Add. namplate information
	/BG	Tag number on nameplate Customer-specific tag number on nameplate
003 Pre-setting custom. Param.
	/PS	Presetting sel. parameters Presetting of selected parameters based on customer data	14
005 Country-specific appl.
	/CS	CRN Canadian Registration Number CRN	25,26,27
006 Conc. & Petr. Measurement
	/AC0	Advanced conc measurement Advanced concentration measurement
	/AC1	/AC0+1 presetted set Advanced concentration measurement with 1 pre-set
	/AC2	/AC0+2 presetted set Advanced concentration measurement with 2 pre-sets
	/AC3	/AC0+3 presetted set Advanced concentration measurement with 3 pre-sets
	/AC4	/AC0+4 presetted set Advanced concentration measurement with 4 pre-sets
	/C52	Net Oil Computing following API standard	18
	/CST	Concentration meas. Standard concentration measurement
007 Rupture disc
	/RD	rupture disk rupture disk
008 Customer-specific calibr.
	/K2	5 pt calibr+factory cert Customized 5 point mass-/volume-flow calibration using water with factory certificate
	/K5	10 pt calibr+Dakks cert Customized 10 point mass-/volume-flow calibration using water with DAkkS certificate
009 Certificate of Compliance
	/P2	2.1 certificate EN 10204 Declaration of compliance with the order 2.1 acc. EN 10204
	/P3	3.1 certificate EN 10204 Inspection certificate 3.1 acc. EN 10204 (QIC)
010 material certificates
	/P6	material certificate acc. to EN 10204: 2004 -3.1 incl. IGC conform to NACE MR0175, MR0103
012 Pressure testing
	/P8	Pressure test certificate Pressure test certificate
013 Surface oil & grease free
	/H1	Degreasing wetted surfaces Degreasing of wetted surfaces acc. ASTM G93/G93M-19, level C, test report
014 Welding certificate
	/WP	incl.: WPS, WPQR, WQC WPS according DIN EN ISO 15609-1 , WPQR according DIN EN ISO 15614-1 , WQC according DIN EN 287-1 and ISO6906-4	17
	/WPA	Weld. proced. acc ASME IX Welding procedures and certificate welding according ASME IX	15
015 calibration certificate
	/L2	calibration certificate with working standards
	/L3	calibration certificate with primary standards
	/L4	calibration certificate including measuring instruments control system
016 ASME B31.3 compliance
	/P15	ASME B31.3 NORM FLU. SER ASME B31.3 compliance NORMAL FLUID SERVICE	15
018 PMI of wetted parts
	/PM	PMI test PMI test for pressure containing parts, including certificate
019 Dye penetr. test weld seam
	/PT	Dye pen test flange weld Dye penetrant test of flange welding, acc. DIN EN ISO 3452-1 including test report	17
	/PTA	Dye pen. test acc ASME V Dye penetrant test of flange welding acc. ASME V including test report	15
020 combined certificate
	/P20	comb /PTA+/WPA+/RTA Dye Penetrant test for flange acc ASME V welding procedure for flange acc ASME IX X-ray test according ASME V	16
021 Tube health check
	/TC	Tube health check Tube health check
023 Batching function
	/BT	Batching function Batching and filling function	22,24
024 Transmitter rotated 180°
	/RB	180° rotatable term box 180 degrees rotated terminal box
025 Viscosity function
	/VM	Viscosity function liquids Viscosity computing function for liquids	20,21
026 Custody transfer
	/Q20	NTEP approval accuracy class 0.3 acc. NIST Handbook 44	28
027 Insulation & heat tracing
	/T10	insulation	2
	/T21	/T10+heat. ASME1/2in. 150 Insulation and heat tracing with ASME 1/2 in. class 150 connection raised face	2
	/T31	/T21+ventilation Insulation, heat tracing and ventilation with ASME 1/2 in. class 150 connection raised face	2
031 Measurem. heat quantity
	/CGC	Measurem.of heat quantity Measurement of heat quantity
034 Connect. cable type + len.
	/L000	No std connecting cab No standard connecting cable separate order for standard sensor cable	8
	/L005	5m (16,4 ft) std cab 5 meter (16,4 ft) remote sensor cable terminated non Ex black / Ex blue	8
	/L010	10m (32,8 ft) std cab 10 meter (32,8 ft) remote sensor cable terminated non Ex black / Ex blue	8
	/L015	15m (49,2 ft) std cab 15 meter (49,2 ft) remote sensor cable terminated non Ex black / Ex blue	8
	/L020	20m (65,6 ft) std cab 20 meter (65,6 ft) remote sensor cable terminated non Ex black / Ex blue	8
	/L030	30m (98,4 ft) std cab 30 meter (98,4 ft) remote sensor cable terminated non Ex black / Ex blue	8
040 Steel arm. connect. cable
	/LAC	Steel armored cable Steel armored version of standard connecting cable	29

Your Product

Subgroup | Page

ROTAMASS | RotaMASS Supreme + Ultimate - Hastelloy

Model

RCUS34H

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	Price pages are for price reference only. Refer to Flow Configurator for correct model code configurations and descriptions.

**Product Notes**
Note Id	Description
1	Refer to flow configurator or general specification on what sizes can be combined with your flow tubes
2	Can not be combined with design and housing 0, 2, A, E
3	Can not be comnined with SCT or AC[ ]
4	not with option T??, L0??
5	not with JP, JQ, JR, JS
6	not with option CGC
7	only with Ex approval KF2?, SF2?, FF1?
8	Can not be combined with design and housing 0, 2
9	Refer to flow configurator or general specification on what sizes can be combined with your flow tubes.
10	Can not be combined with Temperature range -2 or -3. Also, not with RB or T??.
11	Not with option RB.
12	Can not be combined with option CGC or PS.
13	Can not be combined with design and housing 0, 2 or FF11, FF12.
14	Can not be used with communication type and I/0 M?.
15	Can not be combined with WP, RT, PT, T??, Only for Process connection BA or CA.
16	Can not be combined with WP, RT, PT, WPA, RTA, PTA. Only for Process connection BA or CA.
17	Not with option P15 or P20.
18	Not to be used with mass flow and density accuracy 50. Also can not be combined with communication type and I/O J?.
19	Can not be combined with Ex Approval -FF11 or -FF12
20	Not with mass flow and density accuracy 70, 50
21	Only with communication type and I/O JH, JJ, JK, JL, JM, JN
22	Only with communication type and I/O J?
23	Not available for FM Explosion Proof type.
24	Not available for I/O type F0, G0 and G1.
25	Only available for ASME Flange (BA@ or CA@)
26	Not available size 34 combined with 50BA4 and size 38 combined with 80BA4 and size 39 combined with -1QB4A
27	Not available size 39 combined with 1QBA4 and 1QCA4
28	Not available with options /QR,/QR2,/QR3 and /Q11.
29	Can not be combined with design and housing J, K (Stainless steel)

RCUS34H Qnom = 3 t/h (110 lb/min)

01 Process Connection (Please make one selection)

02 Sensor housing material (Please make one selection)

03 Medium temperature range (Please make one selection)

04 Mass flow and density accuracy (Please make one selection)

05 Design and housing (Please make one selection)

06 Ex approval (Please make one selection)

07 Cable entries

08 Communication type and I/O (Please make one selection)

09 Display

002 Add. namplate information

003 Pre-setting custom. Param.

005 Country-specific appl.

006 Conc. & Petr. Measurement

007 Rupture disc

008 Customer-specific calibr.

009 Certificate of Compliance

010 material certificates

012 Pressure testing

013 Surface oil & grease free

014 Welding certificate

015 calibration certificate

016 ASME B31.3 compliance

018 PMI of wetted parts

019 Dye penetr. test weld seam

020 combined certificate

021 Tube health check

023 Batching function

024 Transmitter rotated 180°

025 Viscosity function

026 Custody transfer

027 Insulation & heat tracing

031 Measurem. heat quantity

034 Connect. cable type + len.

040 Steel arm. connect. cable

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Process Connection
(Please make one selection)

02 Sensor housing material
(Please make one selection)

03 Medium temperature range
(Please make one selection)

04 Mass flow and density accuracy
(Please make one selection)

05 Design and housing
(Please make one selection)

06 Ex approval
(Please make one selection)

08 Communication type and I/O
(Please make one selection)