YCA Store | Products | Transmitters | Gauge Pressure | Model EJA438E

Product Categories

#	Model/Spec/Part No.	Description	Notes
EJA438E Diaphragm Sealed Gauge Pressure Transmitter (Flush Type) (GS 01C31J01-01EN)
01 Output Signal (Please make one selection)
	-D	4 to 20 mA DC with digital communication (BRAIN protocol)
	-F	Digital communication (FOUNDATION Fieldbus protocol)
	-J	4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
	-G	Digital communication (PROFIBUS PA protocol)
	-Q	Low power, 1 to 5 V DC with digital communication (HART 7 protocol)
02 Measurement Span (Capsule) (Please make one selection)
	A	0.06 to 3.5 MPa (8.6 to 500 psi) (0.6 to 35 bar) (0.6 to 35kgf/cm2)
	B	Flush type: 0.46 to 16 MPa (67 to 2300 psi) Extended type: 0.46 to 7 MPa (67 to 1000 psi)
03 Specifications
	S	Always S
04 Specifications
	C	Always C
05 Bolts and Nuts Material (Please make one selection)
	C	ASTM grade660 stainless steel
	G	316L SST
	J	ASTM-B7 carbon steel
06 Installation
	-9	Horizontal impulse piping type, left side high pressure
07 Amplifier Housing (Please make one selection)
	1	Material: Cast-aluminum alloy
	2	Material: ASTM CF-8M	2
	3	Material: Cast aluminum alloy with corrosion resistance properties	1
08 Electrical Connection (Please make one selection)
	2	1/2 NPT female, two electrical connections without blind plugs
	4	M20 female, two electrical connections without blind plugs
	7	1/2 NPT female, two electrical connections with a blind plug	3
	9	M20 female, two electrical connections with a blind plug	3
	C	1/2 NPT female, two electrical connections with a 316 SST blind plug
	D	M20 female, two electrical connections with a 316 SST blind plug
	0	G 1/2 female, one electrical connection without blind plugs
	5	G 1/2 female, two electrical connections with a blind plug	3
	A	G 1/2 female, two electrical connections with a 316 SST blind plug
09 Integral Indicator (Please make one selection)
	D	Digital indicator	14
	E	Digital indicator with the range setting switch	4
	N	None
10 Mounting Bracket (Please make one selection)
	B	304 SST 2-inch pipe mounting (flat type)
	J	316 SST 2-inch pipe mounting(flat type)
	N	None
11 Process Connection Style
	-E	Extended type
12 Flange Rating (Please make one selection)
	A1	ANSI class 150
	A2	ANSI class 300
	D2	DIN PN10/16
	D4	DIN PN25/40
	J1	JIS 10K
	J2	JIS 20K
	P1	JPI class 150
	P2	JPI class 300
13 Process Connection Size (Flange Size) (Please make one selection)
	3	3-inch (80mm)
	4	4-inch (100mm)
14 Flange Material (Please make one selection)
	A	JIS S25C
	B	304 SST or F304 SST
	C	316 SST or F316 SST
15 Gasket Contact Surface (Please make one selection)
	1	Serration	5
	2	Flat (no serration)
16 Wetted Parts Material
	SE	Diaphragm: 316L SST Pipe: 316 SST Others: 316 SST
17 Flushing Ring
	0	None	8
18 Extension (Please make one selection)
	1	Length (X2) =50mm
	3	Length (X2) =100mm
	5	Length (X2) =150mm
19 Fill Fluid (Please make one selection)
	-1	for high temperature and high vacuum use (silicone oil) [process temp.]-10 to 250 degC [ambient temp.]-10 to 50 or 60 degC
	-2	for high temperature and high vacuum use (silicone oil) [process temp.]10 to 310 degC [ambient temp.]10 to 50 or 60 degC
	-4	for high vacuum use(silicone oil) [process temp.]-10 to 100 degC [ambient temp.]-10 to 50 or 60 degC
	-A	for general use (silicone oil) [process temp.]-10 to 250 degC [ambient temp.]-10 to 60 degC
	-B	for general use (silicone oil) [process temp.]-30 to 180 degC [ambient temp.]-15 to 60 degC
	-C	for high temperature use (silicone oil) [process temp.]10 to 310 degC [ambient temp.]10 to 60 degC
	-D	for oil-prohibited use (fluorinated oil) [process temp.]-20 to 120 degC [ambient temp.]-10 to 60 degC
	-E	for low temperature use(ethylene glycol) [process temp.]-50 to 100 degC [ambient temp.]-40 to 60 degC
20 Capillary Connection
	B	Back of Diaphragm seal unit
21 Specifications
	2	Always 2
22 Capillary Length (Please make one selection)
	1	1m
	2	2m
	3	3m
	4	4m
	5	5m
	6	6m
	7	7m
	8	8m
	9	9m
	A	10m
001 Optional Features
	/CF1	CSA Explosionproof Approval (For Output Signal code -D, -J, -F, -G or -Q)	6
	/CS1	CSA Intrinsically Safe Approval (For Output Signal code -D or -J)	6 15
	/CS15	CSA Intrinsically Safe Approval (For Output Signal Code -F)	6 15
	/CU1	Combined /CF1 and /CS1 (For Output Signal code -D or -J)	6 15
	/FF1	FM Explosion proof Approval (For Output Signal code -D,-J,-F, -G or -Q)	6
	/FS1	FM Intrinsically Safe Approval (For Output Signal code -D or -J)	6 15
	/FS15	FM Intrinsically Safe and Nonincendive Approval (For Output Signal code -F)	6 15
	/FU1	Combined /FF1 and /FS1 (For Output Signal code -D or -J)	6 15
	/KF22	ATEX Flameproof Approval (For Output Signal code -D, -J, -F, or -G)	6 15
	/KN26	ATEX Intrinsically Safe Approval (Ex ic) (For Output Signal Code -F or -G)	6 15
	/KS21	ATEX Intrinsically Safe Approval (For Output Signal code -D or -J)	6 15
	/KS26	ATEX Intrinsically Safe Approval (For Output Signal Code -F or -G)	6 15
	/KU22	Combined /KF22, /KS21, and Ex ic (For Output Signal code -D or -J)	6 15
	/NF21	NEPSI Flameproof Approval (For Output Signal code -D or -J)	6,15
	/SF2	IECEx Flameproof Approval (For Output Signal code -D, -J, -F, -G or -Q)	6
003 Optional Features
	/D1	P calibration (psi unit)
	/D3	bar calibration (bar unit)
	/D4	M calibration (kgf/cm2 unit)
004 Optional Features
	/P1	/P1	7
	/P2	/P2	7
	/P7	/P7	7
	/PR	Color change, amplifier and terminal covers Munsell code ; 7.5 R4/14, Red
005 Optional Features
	/X2	High anti-corrosion coating	7
006 Optional Features
	/A	Lightning protector
007 Optional Features
	/K1	Degrease cleansing treatment
	/K5	Degrease cleansing and dehydrating treatment
009 Optional Features
	/C1	Failure alarm down-scale	9
	/C2	NAMUR NE43 Compliant Output signal limits; Failure alarm down-scale	9
	/C3	NAMUR NE43 Compliant Output signal limits; Failure alarm up-scale	9
010 Optional Features
	/CA	Data Configuration for HART communication type (Software damping, Descriptor and Message)	10
	/CB	Data Configuration for BRAIN communication type (Software damping)	11
	/CC	Data Configuration for FOUNDATION Fieldbus communication type (Software damping)	12
	/CD	Data configuration for PROFIBUS PA communication type (Software damping)	13
011 Optional Features
	/M2E	Material certificate:flange,block,pipe, base
012 Optional Features
	/T51	Pressure test/leak test certificate Test pressure:2 MPa (290 psi)	22
	/T52	Pressure test/leak test certificate Test pressure:3 MPa (430 psi)	22
	/T53	Pressure test/leak test certificate Test pressure:3.5 MPa (500 psi)	22
	/T54	Pressure test/leak test certificate Test pressure:5 MPa (720 psi)	22
	/T56	Pressure test/leak test certificate Test pressure:8 MPa (1160 psi)	22
	/T57	Pressure test/leak test certificate Test pressure:10 MPa (1450 psi)	22
014 Optional Features
	/N4	Stainless steel tag plate wired onto the	16
016 Optional Features
	/A1	Gold-plated diaphragm
018 Optional Features
	/R	Operating temperature correction
021 Optional Features
	/V	Capillary without PVC sheaths
022 Optional Features
	/EE	Software Download function	12
039 Optional Features
	/YP	Parameter List

Your Product

Subgroup | Page

Gauge Pressure | Model EJA438E

Model

EJA438E

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted. Refer to the "Ordering Information" section of the GS noted.
How to build MS Code	One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear.

**Product Notes**
Note Id	Description
1	Not applicable for Electrical Connection code 0, 5, 7, 9, or A.
2	Not applicable for Electrical Connection code 0, 5, 7, or 9.
3	Material of Blind Plug is aluminum alloy or 304 SST.
4	Not applicable with Output Signal code -F.
5	Applicable for Flange Rating code A1 or A2.
6	Applicable for Electrical Connection code 2, 4, 7, 9, C, or D.
7	Not applicable for Amplifier Housing code 2 or 3.
8	This option is standard with Amplifier Housing code 2.
9	Applicable for Output Signal code -D and -J.
10	Applicable to Output Signal code -J.
11	Applicable to Output Signal code -B.
12	Not applicable with Output Signal code -F.
13	Applicable to Output Signal code -G.
14	Not applicable for Output Signal code -G.
15	Not applicable with Signal Output code -Q.
16	Limited to 16 Characters Maximum. Must be special ordered if more digits are required.

EJA438E Diaphragm Sealed Gauge Pressure Transmitter (Flush Type) (GS 01C31J01-01EN)

01 Output Signal (Please make one selection)

02 Measurement Span (Capsule) (Please make one selection)

03 Specifications

04 Specifications

05 Bolts and Nuts Material (Please make one selection)

06 Installation

07 Amplifier Housing (Please make one selection)

08 Electrical Connection (Please make one selection)

09 Integral Indicator (Please make one selection)

10 Mounting Bracket (Please make one selection)

11 Process Connection Style

12 Flange Rating (Please make one selection)

13 Process Connection Size (Flange Size) (Please make one selection)

14 Flange Material (Please make one selection)

15 Gasket Contact Surface (Please make one selection)

16 Wetted Parts Material

17 Flushing Ring

18 Extension (Please make one selection)

19 Fill Fluid (Please make one selection)

20 Capillary Connection

21 Specifications

22 Capillary Length (Please make one selection)

001 Optional Features

003 Optional Features

004 Optional Features

005 Optional Features

006 Optional Features

007 Optional Features

009 Optional Features

010 Optional Features

011 Optional Features

012 Optional Features

014 Optional Features

016 Optional Features

018 Optional Features

021 Optional Features

022 Optional Features

039 Optional Features

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Output Signal
(Please make one selection)

02 Measurement Span (Capsule)
(Please make one selection)

05 Bolts and Nuts Material
(Please make one selection)

07 Amplifier Housing
(Please make one selection)

08 Electrical Connection
(Please make one selection)

09 Integral Indicator
(Please make one selection)

10 Mounting Bracket
(Please make one selection)

12 Flange Rating
(Please make one selection)

13 Process Connection Size (Flange Size)
(Please make one selection)

14 Flange Material
(Please make one selection)

15 Gasket Contact Surface
(Please make one selection)

18 Extension
(Please make one selection)

19 Fill Fluid
(Please make one selection)

22 Capillary Length
(Please make one selection)