YCA Store | Products | Transmitters | Absolute Pressure | Model EJA510E

Product Categories

#	Model/Spec/Part No.	Description	Notes
EJA510E Absolute Pressure Transmitter (GS 01C31F01-01EN)
01 Output Signal (Please make one selection)
	-D	4 to 20 mA DC with digital communication (BRAIN protocol)
	-F	Digital communication (FOUNDATION Fieldbus protocol)
	-G	Digital communication (PROFIBUS PA protocol)
	-J	4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
	-Q	Low power, 1 to 5 V DC with digital communication (HART 7 protocol)
02 Measurement Span (Capsule) (Please make one selection)
	A	10 to 200 kPa(1.45 to 29 psi) (0.1 to 2 bar) (0.1 to 2 kgf/cm2)
	B	0.02 to 2 MPa (2.9 to 290 psi) (0.2 to 20 bar)(0.2 to 20kgf/cm2)
	C	0.1 to 10 MPa (14.5 to 1450 psi) (1 to 100 bar)(1 to 100 kgf/cm2)
	D	0.5 to 50 MPa (72.5 to 7200 psi) (5 to 500 bar)(5 to 500 kgf/cm2)	16
03 Wetted Parts Material (Please make one selection)
	H	Process connector: Hastelloy C-276 eq., Diaphragm: Hastelloy C-276, Others: Hastelloy C-276 eq.
	S	Process connector: 316L SST, Diaphragm: Hastelloy C-276, Others: 316L SST	1
04 Process Connections (Please make one selection)
	4	1/2 NPT female	1
	7	1/2 NPT male	2
	8	G1/2 DIN 16 288 male	2,3
	9	M20 x 1.5 DIN 16 288 male	2,3
05 Specifications
	N	Always N
06 Specifications
	-0	Always -0
07 Amplifier Housing (Please make one selection)
	1	Cast aluminum alloy
	2	Material: ASTM CF-8M	5
	3	Material: Cast aluminum alloy with corrosion resistance properties	4
08 Electrical Connection (Please make one selection)
	0	G1/2 female, one electrical connection
	2	1/2 NPT female, two electrical connections without blind plugs
	4	M20 female, two electrical connections without blind plugs
	5	G1/2 female, two electrical connections and a blind plug	6
	7	1/2 NPT female, two electrical connections and a blind plug	6
	9	M20 female, two electrical connections and a blind plug	6
	A	G 1/2 female, two electrical connections with a 316 SST blind plug
	C	1/2 NPT female, two electrical connections with a 316 SST blind plug
	D	M20 female, two electrical connections with a 316 SST blind plug
09 Integral Indicator (Please make one selection)
	D	Digital indicator	7
	E	Digital indicator with the range setting switch	8
	N	None
10 Mounting Bracket (Please make one selection)
	L	316 SST 2-inch pipe mounting
	N	None
001 Optional Features
	/CF1	CSA Explosionproof Approval (For Output Signal code -D, -J, -F, -G or -Q)	9
	/CS1	CSA Intrinsically Safe Approval (For Output Signal code -D or -J)	9,19
	/CS15	CSA Intrinsically Safe Approval (For Output Signal Code -F)	9,19
	/CU1	Combined /CF1 and /CS1 (For Output Signal code -D or -J)	9,19
	/FF1	FM Explosion proof Approval (For Output Signal code -D,-J,-F, -G or -Q)	9
	/FS1	FM Intrinsically Safe Approval (For Output Signal code -D or -J)	9,17,19
	/FS15	FM Intrinsically Safe and Nonincendive Approval (For Output Signal code -F)	9,17,19
	/FU1	Combined /FF1 and /FS1 (For Output Signal code -D or -J)	9,17,19
	/KF22	ATEX Flameproof Approval (For Output Signal code -D, -J, -F, or -G)	9,17,19
	/KN26	ATEX Intrinsically Safe Approval (Ex ic) (For Output Signal Code -F or -G)	9,17,19
	/KS21	ATEX Intrinsically Safe Approval (For Output Signal code -D or -J)	9,17,19
	/KS26	ATEX Intrinsically Safe Approval (For Output Signal Code -F or -G)	9,17,19
	/KU22	Combined /KF22, /KS21, and Ex ic (For Output Signal code -D or -J)	9,17,19
	/NF21	NEPSI Flameproof Approval (For Output Signal code -D or -J)	9,19
	/SF22	IECEx flameproof approval (For Output Signal code -D, -J, -F, -G or -Q)	9
	/SU22	IECEx Intrinsically safe and flameproof (For Output Signal code -D or -J)
003 Optional Features
	/D1	P calibration (psi unit)
	/D3	bar calibration (bar unit)
	/D4	M calibration (kgf/cm2 unit)
004 Optional Features
	/P1	Color change, amplifier cover only Munsell code ; N1.5, black	10
	/P2	Color change, amplifier cover only Munsell code ; 7.5BG4/1.5, jade green	10
	/P7	Color change, amplifier cover only Metallic silver	10
	/PR	Color change, amplifier and terminal covers Munsell code ; 7.5 R4/14, Red	10
005 Optional Features
	/X2	High anti-corrosion coating	10
006 Optional Features
	/A	Lightning protector
007 Optional Features
	/K1	Degrease cleansing treatment
	/K2	Degrease cleansing treatment and with fluorinated oil filled capsule
	/K3	Fluorinated oil filled capsule
	/K41	Degrease cleansing treatment and implementation certificate
	/K42	Degrease cleansing treatment with fluorinated oil filled capsule, and implementation certificate
	/K45	Degrease cleansing and dehydrating treatment, and implementation certificate
	/K46	Degrease cleansing and dehydrating treatment with fluorinated oil filled capsule, and implementation certificate
009 Optional Features
	/C1	Failure alarm down-scale	12, 13
	/C2	NAMUR NE43 Compliant Output signal limits; Failure alarm down-scale	12, 13
	/C3	NAMUR NE43 Compliant Output signal limits; Failure alarm up-scale	12, 13
010 Optional Features
	/CA	Data Configuration for HART communication type (Software damping,Descriptor and Message)	13
	/CB	Data Configuration for BRAIN communication type (Software damping)	12
	/CC	Data Configuration for FOUNDATION Fieldbus communication type (Software damping)	14
	/CD	Data configuration for PROFIBUS PA communication type (Software damping)	15
	/CJ	Data configuration(for HART): Disabling external zero adjustment, Software damping, Descriptor and Message	23
	/CK	Data configuration(for BRAIN): Disables external zero adjustment, Software damping	23
012 Optional Features
	/T05	Pressure test/leak test certificate Test pressure:200 kPa(800 inH2O)
	/T06	Pressure test/leak test certificate Test pressure:2 MPa (290 psi)
	/T07	Pressure test/leak test certificate Test pressure:10 MPa (1450 psi)
	/T08	Pressure test/leak test certificate Test pressure:50 MPa (7200 psi)	17
	/T15	Pressure test/leak test certificate Test pressure:70 MPa (10150 psi)	18
014 Optional Features
	/N4	Stainless steel tag plate wired onto the transmitter	21
015 Optional Features
	/M15	Material certificate: process connector
	/MA2	Material certificate: Process connector, Diaphragm, Capsule body
016 Optional Features
	/A1	Gold-plated diaphragm
019 Optional Features
	/HAC	High accuracy type
020 Optional Features
	/HG	High pressure-proof structure
021 Optional Features
	/EE	Software Download function	14
023 Optional Features
	/PE3	European Pressure Equipment Directive Category III
027 Optional Features
	/HC	316 SST exterior parts	11
039 Optional Features
	/YP	Parameter List
046 Optional Features
	/L4	Calibration certificate: Introduction and Yokogawa traceability control system
	/L5	Calibration certificate: Introduction, Yokogawa traceability control system, and primary standards list
	/L6	Calibration certificate: Introduction, Yokogawa traceability control system, primary standards list, and calibration equipments list
	/L9	Calibration certificate: Introduction, Yokogawa traceability control system, primary standards list, calibration equipments list and their test cert.
051 Optional Features
	/PP	An additional blind plug	22

Parts / Accessories

(Multiple selections allowed, creates separate lines on the quote.)

Bracket Kits (Separate Line Item)
	F9900SJ	2-inch pipe mounting bracket kit (316 SST)

Your Product

Subgroup | Page

Absolute Pressure | Model EJA510E

Model

EJA510E

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted. Refer to the "Ordering Information" section of the GS noted.
How to build MS Code	One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear.
Example MS Code	EJA510A-JAS4N-012EL/FF1/D1

**Product Notes**
Note Id	Description
1	Use this code for third party diaphragm seal attachment.
2	Do not use this code for third party diaphragm seal attachment.
3	Not applicable with combination of Measurement Span (Capsule) code D and Wetted Parts Material code H.
4	Not applicable for Electrical Connection code 0, 5, 7, 9, or A.
5	Not applicable for Electrical Connection code 0, 5, 7, or 9.
6	Material of blind plug is aluminum alloy or 304 SST.
7	Not applicable for Output Signal code -G.
8	Not applicable for Output Signal code -F.
9	Applicable for Electrical Connection code 2, 4, 7, 9, C, or D.
10	Not applicable for Amplifier Housing code 2 or 3.
11	This option included in Amplifier Housing code 2.
12	Applicable for Ouput Signal code -D.
13	Applicable for Ouput Signal code -J.
14	Applicable for Output Signal code -F.
15	Applicable for Output Signal code -G.
16	720 to 10,150 psi with /HG option code
17	Not applicable with Option code /HG
18	Applicable for Option code /HG only
19	Not applicable with Signal Output code -Q.
20	Tokuchu approval is required before an order for this option can be accepted.
21	Limited to 16 Characters Maximum. Must be special ordered if more digits are required.
22	Not applicable for electrical connection codes 0, 2, and 4.
23	See ‘Ordering Information’ in GS.

EJA510E Absolute Pressure Transmitter (GS 01C31F01-01EN)

01 Output Signal (Please make one selection)

02 Measurement Span (Capsule) (Please make one selection)

03 Wetted Parts Material (Please make one selection)

04 Process Connections (Please make one selection)

05 Specifications

06 Specifications

07 Amplifier Housing (Please make one selection)

08 Electrical Connection (Please make one selection)

09 Integral Indicator (Please make one selection)

10 Mounting Bracket (Please make one selection)

001 Optional Features

003 Optional Features

004 Optional Features

005 Optional Features

006 Optional Features

007 Optional Features

009 Optional Features

010 Optional Features

012 Optional Features

014 Optional Features

015 Optional Features

016 Optional Features

019 Optional Features

020 Optional Features

021 Optional Features

023 Optional Features

027 Optional Features

039 Optional Features

046 Optional Features

051 Optional Features

Parts / Accessories

Bracket Kits (Separate Line Item)

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Output Signal
(Please make one selection)

02 Measurement Span (Capsule)
(Please make one selection)

03 Wetted Parts Material
(Please make one selection)

04 Process Connections
(Please make one selection)

07 Amplifier Housing
(Please make one selection)

08 Electrical Connection
(Please make one selection)

09 Integral Indicator
(Please make one selection)

10 Mounting Bracket
(Please make one selection)