YCA Store | Products | Transmitters | Differential Pressure | Model EJA110E

#	Model/Spec/Part No.	Description	Notes
EJA110E Differential Pressure Transmitter (GS 01C31B01-01EN)
01 Output Signal (Please make one selection)
	-D	4 to 20 mA DC with digital communication (BRAIN protocol)
	-F	Digital communication (FOUNDATION Fieldbus protocol)
	-G	Digital communication (PROFIBUS PA protocol)
	-J	4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
	-Q	Low power, 1 to 5 V DC with digital communication (HART 7 protocol)
02 Measurement Span (Capsule) (Please make one selection)
	F	0.5 to 5kPa(2 to 20 inH2O) (5 to 50 mbar)(50 to 500 mmH2O)	1,3
	H	5 to 500 kPa(20 to 2000 inH2O) (50 to 5000 mbar)(0.05 to 5 kgf/cm2)
	L	0.5 to 10 kPa (2 to 40 inH2O) (5 to 100 mbar)(50 to 1000 mmH2O)	2,3
	M	1 to 100 kPa(4 to 400 inH2O) (10 to 1000 mbar)(100 to 10000 mmH2O)
	V	0.14 to 14 MPa(20 to 2000 psi) (1.4 to 140 bar)(1.4 to 140 kgf/cm2)
03 Wetted Parts Material (Please make one selection)
	A	Cover flange: Hastelloy C-276 equiv. Capsule: Hastelloy C-276(diaphragm and others) Process connector: Hastelloy C-276 equiv. Vent plug: Hastelloy C-276
	B	Cover flange: Monel equivalent Capsule: Monel(diaphragm and others) Process connector: Monel equivalent vent plug: Monel
	D	Cover flange: Hastelloy C-276 equiv. Capsule: Tantalum(diaphragm and others) Process connector: Hastelloy C-276 equiv. Vent plug: Hastelloy C-276
	H	Cover flange: ASTM CF-8M Capsule: Hatelloy C-276(diaphragm and others) Process connector: ASTM CF-8M Vent plug: 316 SST
	L	Cover flange: ASTM CF-3M, Capsule: Hastelloy C-276(diaphragm), (F)316L SST(others), Vent plug: 316L SST Process connector: ASTM CF-3M
	M	Cover flange: ASTM CF-8M Capsule: Monel (diaphragm and others) Process connector: ASTM CF-8M Vent plug: 316 SST
	S	Cover flange: ASTM CF-8M Capsule: Hastelloy C-276(diaphragm)/ (F)316L SST(others), Vent plug: 316 SST, Process connector: ASTM CF-8M	4
	T	Cover flange: ASTM CF-8M Diaphragm: Tantalum Vent plug: 316 SST Process connector: ASTM CF-8M
	W	Cover flange, process connector: Super Duplex SST equiv. Capsule: Hastelloy C-276(diaphragm and others) Vent plug: Super Duplex SST
04 Process Connections (Please make one selection)
	0	Without process connector (RC 1/4 female on cover flange)
	1	With Rc1/4 female process connector
	2	With Rc1/2 female process connector
	3	With 1/4NPT female process connector
	4	With 1/2NPT female process connector
	5	Without process connector (1/4 NPT female on cover flange)	5
	W	Assembled with low volume cover flanges for diaphragm seal units with two M12 x 1.25 female threads, and shipped with two new capsule gaskets	6
05 Cover Flange Bolts and Nuts Material (Please make one selection)
	C	ASTM grade660 stainless steel
	G	316L SST
	J	ASTM-B7 carbon steel
06 Installation (Please make one selection)
	-7	Vertical impulse piping type, left side high pressure, process connectors downside	3
	-8	Horizontal impulse piping type, right side high pressure	3
	-9	Horizontal impulse piping type, left side high pressure	4
	-B	Bottom process connection type, left side high pressure	1, 3
	-U	Universal flange	1, 3
07 Amplifier Housing (Please make one selection)
	1	Material: Cast-aluminum alloy
	2	Material: ASTM CF-8M	8
	3	Material: Cast aluminum alloy with corrosion resistance properties	7
08 Electrical Connection (Please make one selection)
	0	G 1/2 female, one electrical connection,
	2	1/2 NPT female, two electrical connections, without blind plugs
	4	M20 female, two electrical connections without blind plugs
	5	G 1/2 female, two electrical connections with a blind plug	9
	7	1/2 NPT female, two electrical connections with a blind plug	10
	9	M20 female, two electrical connections with a blind plug	9
	A	G 1/2 female, two electrical connections with a 316 SST blind plug
	C	1/2 NPT female, two electrical connections with a 316 SST blind plug
	D	M20 female, two electrical connections with a 316 SST blind plug
09 Integral Indicator (Please make one selection)
	D	Digital indicator	11
	E	Digital indicator with a range setting switch	12
	N	None
10 Mounting Bracket (Please make one selection)
	B	304 SST 2-inch pipe mounting(flat type)
	D	304 SST or SCS13A 2-inch pipe mounting(L type)
	J	316 SST 2-inch pipe mounting(flat type)
	K	316 SST or SCS14A 2-inch pipe mounting(L type)
	M	316 SST or SCS14A 2-inch pipe mounting (for bottom process connection)	13
	N	None
	P	Position adjustable bracket for vertical piping installation, SUS316, 2-inch pipe mounting(L type)
001 Optional Features
	/CF1	CSA Explosionproof Approval (For Output Signal code -D, -J, -F, -G or -Q)	14
	/CS1	CSA Intrinsically Safe Approval (For Output Signal code -D or -J)	14
	/CS15	CSA Intrinsically Safe Approval (For Output Signal Code -F)	14
	/CU1	Combined /CF1 and /CS1 (For Output Signal code -D or -J)	14
	/FF1	FM Explosion proof Approval (For Output Signal code -D,-J,-F, -G or -Q)	14
	/FS1	FM Intrinsically Safe Approval (For Output Signal code -D or -J)	14
	/FS15	FM Intrinsically Safe and Nonincendive Approval (For Output Signal code -F)	14
	/FU1	Combined /FF1 and /FS1 (For Output Signal code -D or -J)	14
	/KF22	ATEX Flameproof Approval (For Output Signal code -D, -J, -F, or -G)	14
	/KN26	ATEX Intrinsically Safe Approval (Ex ic) (For Output Signal Code -F or -G)	14
	/KS21	ATEX Intrinsically Safe Approval (For Output Signal code -D or -J)	14
	/KS26	ATEX Intrinsically Safe Approval (For Output Signal Code -F or -G)	14
	/KU22	Combined /KF22, /KS21, and Ex ic (For Output Signal code -D or -J)	14
	/NF21	NEPSI Flameproof Approval (For Output Signal code -D or -J)	14
	/NS21	NEPSI Intrinsically safe Approval (For Output Signal code -D or -J)	14
	/NS25	NEPSI Intrinsic Safety Approval (For Output Signal code -F or -G)	14
	/PF22	KOSHA Flameproof Approval (For Output Signal code -D or -J)	14
	/PS21	KOSHA Intrinsically safe Approval (For Output Signal code -D or -J)	14
	/SF22	IECEx flameproof approval (For Output Signal code -D, -J, -F, -G or -Q)	14
	/SS26	IECEx Intrinsically safe Approval (For Output Signal code -F or -G)	14
	/SU22	IECEx Intrinsically safe and flameproof (For Output Signal code -D or -J)	14
	/UF1	INMETRO Flameproof Approval For Output Signal code -D or -J)	14
	/US1	INMETRO Intrinsically safe Approval (For Output Signal code -D or -J)	14
003 Optional Features
	/D1	P calibration (psi unit)
	/D3	bar calibration (bar unit)
	/D4	M calibration (kgf/cm2 unit)
004 Optional Features
	/P1	Color change, amplifier cover only Munsell code; N1.5, black	20
	/P2	Color change, amplifier cover only Munsell code; 7.5BG4/1.5, jade green	20
	/P7	Color change, amplifier cover only Metallic silver	20
	/PR	Color change, amplifier and terminal covers Munsell code ; 7.5 R4/14, Red
005 Optional Features
	/X2	High anti-corrosion coating
006 Optional Features
	/A	Lightning protector
007 Optional Features
	/K1	Degrease cleansing treatment	21
	/K2	Degrease cleansing treatment and with fluorinated oil filled capsule	21
	/K3	Fluorinated oil filled capsule
	/K41	Degrease cleansing treatment and implementation certificate	21
	/K42	Degrease cleansing treatment with fluorinated oil filled capsule, and implementation certificate	21
	/K45	Degrease cleansing and dehydrating treatment, and implementation certificate	21
	/K46	Degrease cleansing and dehydrating treatment with fluorinated oil filled capsule, and implementation certificate	21
	/K5	Degrease cleansing and dehydrating treatment	21
	/K6	Degrease cleansing and dehydrating treatment with fluorinated oil filled capsule	21
008 Optional Features
	/U1	Long vent	22
009 Optional Features
	/C1	Failure alarm down-scale
	/C2	NAMUR NE43 Compliant Output signal limits; Failure alarm down-scale
	/C3	NAMUR NE43 Compliant Output signal limits; Failure alarm up-scale
010 Optional Features
	/CA	Data Configuration for HART communication type (Software damping,Descriptor and Message)	27
	/CB	Data Configuration for BRAIN communication type (Software damping)	27
	/CC	Data Configuration for FOUNDATION Fieldbus communication type (Software damping)	27
	/CD	Data Configuration for PROFIBUS PA communication type (Software damping)	27
	/CJ	Data configuration(for HART): Disabling external zero adjustment, Software damping, Descriptor and Message	27
	/CK	Data configuration(for BRAIN): Disables external zero adjustment, Software damping	27
011 Optional Features
	/M01	Material certificate:cover flange	29
	/M11	Material certificate:cover flange, process connector	30
	/MA1	Material certificate: Cover flange, diaphragm, capsule body
	/MC1	Material certificate: Cover flange, process connector, diaphragm, capsule body
	/MG1	Material certificate for wetted parts including cover flange, bolt and nut for cover flange, diaphragm, capsule body, vent and drain plug, vent screw, capsule gasket
	/MH1	Material certificate for wetted parts including cover flange, process connector, bolt and nut for cover flange, bolt for process connector, diaphragm, capsule body, vent and drain plug, vent screw, capsule gasket
012 Optional Features
	/T12	Pressure test/leak test certificate Test pressure:16 MPa(2300 psi)
	/T13	Pressure test/leak test certificate Test pressure:25 MPa(3600 psi)	31
013 Optional Features
	/N1	Right side high pressure. Without drain and vent plugs.	26
	/N2	Right side high pressure. IEC61518 pro- cess connection with female threads on cover flanges, with blind kidney flanges on back. Without drain and vent plugs.	26
	/N3	Right side high pressure. /N1,/N2 and material certificate for cover flange, diaphragm, capsule body and blind kidney flange.	26
014 Optional Features
	/N4	Stainless steel tag plate wired onto the transmitter	32
016 Optional Features
	/A1	Gold-plated diaphragm	24
	/A2	Gold-plated diaphragm (10 micro meter)	25
019 Optional Features
	/HAC	High accuracy type	15
020 Optional Features
	/HG	High pressure-proof structure	19
021 Optional Features
	/EE	Software Download function
023 Optional Features
	/PE3	European Pressure Equipment Directive Category III	28
027 Optional Features
	/HC	316 SST exterior parts	16
028 Optional Features
	/GS	Gold-plated capsule gasket Without drain and vent plugs	23
035 Optional Features
	/HD	High damping capsule	17
036 Optional Features
	/WCA	American Bureau of Shipping (ABS) Type Approval (For Output Signal code -D or -J)
	/WCB	Bureau Veritas Type Approval (For Output Signal code -D or -J)
	/WCD	Det Norske Veritas (DNV) Type Approval (For Output Signal code -D or - J)
	/WCL	Lloyd's Register of Shipping Type Approval (For Output Signal code -D or -J)
	/WCN	Nippon Kaiji Kyokai (NK) Type Approval (For Output Signal code -D or -J)
039 Optional Features
	/YP	Parameter List
043 Optional Features
	/SLT	Low temperature expansion of functional safety ambient temperature
046 Optional Features
	/L4	Calibration certificate: Introduction and Yokogawa traceability control system
	/L5	Calibration certificate: Introduction, Yokogawa traceability control system, and primary standards list
	/L6	Calibration certificate: Introduction, Yokogawa traceability control system, primary standards list, and calibration equipments list
	/L9	Calibration certificate: Introduction, Yokogawa traceability control system, primary standards list, calibration equipments list and their test cert.
050 Optional Features
	/BS	Bug screen	34
051 Optional Features
	/PP	An additional blind plug	33

Your Product

Subgroup | Page

Differential Pressure | Model EJA110E

Model

EJA110E

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted. Refer to the "Ordering Information" section of the GS noted.
How to build MS Code	One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear.
Example MS Code	EJA110E-JMS4G-912NN/FF1/D1

**Product Notes**
Note Id	Description
1	Applicable for Wetted Parts Material code S.
2	Applicable for Wetted Parts Material code H, M, T, A, D, or B.
3	Not applicable for Process Connection code W.
4	Use for 3rd party diaphragm seal attachment.
5	Choose for single diaphragm seal attachment.
6	Choose for dual diaphragm seals attachment.
7	Not applicable for Electrical Connection code 0, 5, 7, 9, or A.
8	Not applicable for Electrical Connection code 0, 5, 7, or 9.
9	Material of blind plug is aluminum alloy.
10	Material of blind plug is 304 SST.
11	Not applicable for Output Signal code -G.
12	Not applicable for Output Signal code -F.
13	Applicable for Installation code B.
14	Applicable for Electrical Connection code 2, 4, 7, 9, C, or D.
15	Applicable for Measurement Span (Capsule) code M, H, or V with Wetted Parts Material code S; not applicable for Output Signal code -Q or Option code /A2.
16	This option is standard with Amplifier Housing code 2.
17	Applicable to Measurement Span (Capsule) code M or H; not applicable to Wetted Material code S or Option codes /HG, /K2, /K3, /K6, /PE3, or /T13.
18	Tokuchu approval is required before an order for this option can be accepted.
19	Applicable for Meaasurement Span (Capsule) code M, H, or V with Wetted Parts Material code S or L.
20	Not applicable with Amplifier Housing code 2 or 3.
21	Applicable for Wetted Parts Material code S, M, H, or T.
22	Applicable for Installation code 7 with Wetted Parts Material code S, H, M, or T.
23	Applicable for Wetted Parts Material code S, Process Connection code 0 or 5, and Installation code 8 or 9. Not applicable for Option code /U1, /N2, /N3, or /M11.
24	Applicable for Wetted Parts Material code S or L.
25	Applicable for Wetted Parts Material code S or L; Not applicable for Agency Approval Code (Option) code /FF1. /FS1, /FS15, or /FU1.
26	Applicable for Wetted Parts Material code S, M, H, or T; Process Connection code 3, 4, or 5; Installation code 9, and Mounting Bracket code N.
27	Refer to the indicated GS for information.
28	Applicable for Measurment Span (Capsule) code M, H, or V with Wetted Parts Material code S. If compliance with category III is required, specify Option code /HG.
29	Applicable for Process Connections code 0 or 5. Not applicable with Process Connection W.
30	Applicable for Process Connection code 1, 2, 3, or 4. Not applicable with Process Connection W.
31	Applicable for Option code /HG.
32	Limited to 16 Characters Maximum. Must be special ordered if more digits are required.
33	Not applicable for electrical connection codes 0, 2, and 4.
34	Applicable for process connection codes 0, 1, 2, 3, 4, 5.

EJA110E Differential Pressure Transmitter (GS 01C31B01-01EN)

01 Output Signal (Please make one selection)

02 Measurement Span (Capsule) (Please make one selection)

03 Wetted Parts Material (Please make one selection)

04 Process Connections (Please make one selection)

05 Cover Flange Bolts and Nuts Material (Please make one selection)

06 Installation (Please make one selection)

07 Amplifier Housing (Please make one selection)

08 Electrical Connection (Please make one selection)

09 Integral Indicator (Please make one selection)

10 Mounting Bracket (Please make one selection)

001 Optional Features

003 Optional Features

004 Optional Features

005 Optional Features

006 Optional Features

007 Optional Features

008 Optional Features

009 Optional Features

010 Optional Features

011 Optional Features

012 Optional Features

013 Optional Features

014 Optional Features

016 Optional Features

019 Optional Features

020 Optional Features

021 Optional Features

023 Optional Features

027 Optional Features

028 Optional Features

035 Optional Features

036 Optional Features

039 Optional Features

043 Optional Features

046 Optional Features

050 Optional Features

051 Optional Features

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Output Signal
(Please make one selection)

02 Measurement Span (Capsule)
(Please make one selection)

03 Wetted Parts Material
(Please make one selection)

04 Process Connections
(Please make one selection)

05 Cover Flange Bolts and Nuts Material
(Please make one selection)

06 Installation
(Please make one selection)

07 Amplifier Housing
(Please make one selection)

08 Electrical Connection
(Please make one selection)

09 Integral Indicator
(Please make one selection)

10 Mounting Bracket
(Please make one selection)