YCA Store | Products | Transmitters | Wireless Products | EJX310B

Product Categories

#	Model/Spec/Part No.	Description	Notes
EJX310B Absolute Pressure Transmitter (GS 01C27B01-01EN)			1
01 Output Signal
	-1	Wireless communication (ISA100.11a); successor of code -L
02 Measurement Span (Capsule) (Please make one selection)
	A	2.5 to 500 psia
	B	10 to 2,300 psia
	L	0.15 to 2.95 inHg
	M	0.39 to 38 inHg
03 Wetted Parts Material
	S	Cover flange: ASTM CF-8M, Capsule: Hastelloy C-276(diaphragm), (F)316L SST(others), Vent plug: 316 SST, Process connector: ASTM CF-8M
04 Process Connections (Please make one selection)
	0	Without process connector (RC 1/4 female on cover flanges)
	1	With Rc1/4 female process connector
	2	With Rc1/2 female process connector
	3	With 1/4NPT female process connector
	4	With 1/2NPT female process connector
	5	Without process connector (1/4 NPT female on cover flange)
05 Bolts and Nuts Material (Please make one selection)
	C	ASTM grade660 stainless steel
	G	316L SST
	J	ASTM-B7M carbon steel
06 Installation (Please make one selection)
	-3	Vertical impluse piping type, right side high pressure, process connectors downside
	-7	Vertical impulse piping type, left side high pressure, process connectors downside
	-8	Horizontal impulse piping type, right side high pressure
	-9	Horizontal impulse piping type, left side high pressure
	-B	Bottom process connection type, left side high pressure
	-U	Universal flange
07 Amplifier Housing (Please make one selection)
	9	Material: Cast-aluminum alloy for wireless communication type without antenna (N connector)
	7	Material: Cast-aluminum alloy for wireless communication type with integral antenna
	8	Material: Cast-aluminum alloy for wireless communication type with detachable antenna (2 dBi)
08 Electrical Connection
	J	No electrical connection battery powered type(battery case only; battery cells not included)	9
09 Integral Indicator
	D	Digital Indicator
10 Mounting Bracket (Please make one selection)
	B	304SST 2-inch pipe mounting(flat type)
	D	304 SST or SCS13A 2-inch pipe mounting (L type)
	K	316 SST or SCS14A 2-inch pipe mounting (L type)
	M	316 SST or SCS14A 2-inch pipe mounting (for bottom process connection)
	N	None
001 Optional Features
	/CS17	CSA intrinsically safe and nonincendive approval	10
	/FS17	FM intrinsically safe and nonincendive approval
	/KS27	CENELEC ATEX (KEMA) intrinsically safe approval	10
	/SS27	IECEx Intrinsically safe approval	10
003 Optional Features
	/D1	P calibration (psi unit)	2
	/D3	bar calibration (bar unit)	2
	/D4	M calibration (kgf/cm2 unit)	2
005 Optional Features
	/X2	High anti-corrosion coating
007 Optional Features
	/K1	Degrease cleansing treatment
	/K2	Degrease cleansing treatment and with fluorinated oil filled capsule
	/K3	Fluorinated oil filled capsule
	/K5	Degrease cleansing and dehydrating treatment
	/K6	Degrease cleansing and dehydrating treatment with fluorinated oil filled capsule
008 Optional Features
	/U1	Long vent	3
011 Optional Features
	/M01	Material certificate:cover flange
	/M11	Material certificate:cover flange, proce connector
012 Optional Features
	/T01	Pressure test/leak test certificate Test pressure:3.5 MPa(500 psi)
	/T04	Pressure test/leak test certificate Test pressure:50 kPa(200 inH2O)
	/T12	Pressure test/leak test certificate Test pressure:16 MPa(2300 psi)
013 Optional Features
	/N1	Without drain and vent plugs	6
	/N2	Right side high pressure. IEC61518 pro- cess connection with female threads on cover flange, with blind kidney flange on back. Without drain and vent plug.	6
	/N3	/N1, /N2 and material certificate for cover flange, diaphragm, capsule body and blind kidney flange	6
015 Optional Features
	/S1	130Pa abs(1mmHg abs) calibration	8
017 Optional Features
	/A1	Gold-plated diaphragm
028 Optional Features
	/GS	Gold-plated capsule gasket Without drain and vent plugs	4, 5
046 Optional Features
	/L4	Calibration certificate: Introduction and Yokogawa traceability control system
	/L5	Calibration certificate: Introduction, Yokogawa traceability control system, and primary standards list
	/L6	Calibration certificate: Introduction, Yokogawa traceability control system, primary standards list, and calibration equipments list
	/L9	Calibration certificate: Introduction, Yokogawa traceability control system, primary standards list, calibration equipments list and their test cert.

Parts / Accessories

(Multiple selections allowed, creates separate lines on the quote.)

Your Product

Subgroup | Page

Wireless Products | EJX310B

Model

EJX310B

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted. Refer to the "Ordering Information" section of the GS noted.
How to build MS Code	One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear.
Example MS Code	EJX310B-1MS4G-99JDB/FS17/D1 Typically Stocked Model Code: N/A
Wireless Accessories	See ISA100 Wireless Accessory page(s) in this EPB for required antennas, cables, etc.

**Product Notes**
Note Id	Description
1	This product is regulated by international import/export controls. Government authorization by its residence country is required. Contact Customer Service for required documents.
2	The unit of MWP on the name plate of the housing is the same unit as specified by Option code /D1, /D3, or /D4. If no code is selected, the unit of MWP will be kPa or MPa.
3	Only applicable to Installation code -7.
4	Applcable for Process Connection code 0 or 5; and Installation code -8 or -9.
5	Not applicable with Opton codess /U1, /N2, /N3, and /M11.
6	Applicable for Process Connector code 3, 4, or 5; Installation code -9; and Mounting Bracket code N.
7	Order as a separate line item.
8	Applicable fo Measurement Span (Capsule) code M or A in which the URV is less than 53.3 kPa abs. Not applicable for Measurement Span (Capsule) code L or B.
9	Batteries sold seperately.
10	Only applicable for Amplifier Housing code 7.

Product Categories

EJX310B Absolute Pressure Transmitter (GS 01C27B01-01EN)

01 Output Signal

02 Measurement Span (Capsule)
(Please make one selection)

03 Wetted Parts Material

04 Process Connections
(Please make one selection)

05 Bolts and Nuts Material
(Please make one selection)

06 Installation
(Please make one selection)

07 Amplifier Housing
(Please make one selection)

08 Electrical Connection

09 Integral Indicator

10 Mounting Bracket
(Please make one selection)

001 Optional Features

003 Optional Features

005 Optional Features

007 Optional Features

008 Optional Features

011 Optional Features

012 Optional Features

013 Optional Features

015 Optional Features

017 Optional Features

028 Optional Features

046 Optional Features

Parts / Accessories

Certificates (Separate Line Item)

Certified Drawings (Separate Line Item)

Optional Accessories (Order as Separate Line Item)

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

EJX310B Absolute Pressure Transmitter (GS 01C27B01-01EN)

01 Output Signal

02 Measurement Span (Capsule) (Please make one selection)

03 Wetted Parts Material

04 Process Connections (Please make one selection)

05 Bolts and Nuts Material (Please make one selection)

06 Installation (Please make one selection)

07 Amplifier Housing (Please make one selection)

08 Electrical Connection

09 Integral Indicator

10 Mounting Bracket (Please make one selection)

001 Optional Features

003 Optional Features

005 Optional Features

007 Optional Features

008 Optional Features

011 Optional Features

012 Optional Features

013 Optional Features

015 Optional Features

017 Optional Features

028 Optional Features

046 Optional Features

Parts / Accessories

Certificates (Separate Line Item)

Certified Drawings (Separate Line Item)

Optional Accessories (Order as Separate Line Item)

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

02 Measurement Span (Capsule)
(Please make one selection)

04 Process Connections
(Please make one selection)

05 Bolts and Nuts Material
(Please make one selection)

06 Installation
(Please make one selection)

07 Amplifier Housing
(Please make one selection)

10 Mounting Bracket
(Please make one selection)