| 1 |
Applicable for External Temperature Input code 0. |
| 2 |
Not applicable for Amplifier Housing code 2. Material of plug is aluminum alloy or 304 SST. |
| 3 |
RTD is not provided |
| 4 |
Specifiy when using conduit for RTD connection. |
| 5 |
Not applicable for Amplifier Housing code 2. |
| 6 |
Applicable for External Temperature Input code -B, -C, and -D. |
| 7 |
Applicable for External Temperature Input code -1, -2, -3, and -4. |
| 8 |
Not appllicable for Output Signal code F. Tokuchu required to purchase this option. Contact PMK before quoting. |
| 9 |
The option is included in Amplifier Housing code 2. |
| 10 |
The unit of measure that the MWP is expressed in on the Datad Plate. |
| 11 |
Applicable for Installation code -7. Material of vent is 316 SST. |
| 12 |
Applicable for Output Signal code -E. |
| 13 |
Applicable for Installation code -9 and Mounting Bracket code N. |
| 14 |
Applicable to Output Signal code -F. |
| 15 |
Contact PMK for the propoer application of this option. |
| 16 |
Not applicable with Multi Sensing Measurement Function code A, if not selected with Mass Flow Measurement Function code B, then must have configuration software (see FSA120). |
| 17 |
Order as a separate line item |
| 18 |
Percentage of Yokogawa America List Price. Warranty only valid on transmitters that stay within the Yokogawa America service area. Order as a separate line item. |
| 19 |
A Hardware and communication manual is included with each transmitter. These are additional manuals. Order as a separate line item |
| 20 |
Applicable for Measurement Function code A. |
| 21 |
/A Lightning Protector must be selected. |
| 22 |
For HART protocol type |
| 23 |
For HART protocol type; The change of pressure fluctuation is monitored and then detects the impulse line blockage. Refer to TI 01C25A31-01E for
detailed technical information required for using this function. |
| 24 |
For FOUNDATION Fieldbus protocol type; This option code must be specified with option code EE; The change of pressure fluctuation is monitored and then detects the impulse line blockage. Refer to TI 01C25A31-01E for
detailed technical information required for using this function. |
| 25 |
Limited to 16 Characters Maximum. Must be special ordered if more digits are required. |
| 26 |
General Note for all DPHARP transmitters: Z911 document not available for GS11, GS12, GS16, GU11, GU12, JS4, JS5, J12, PS21,PF23, PF22, NS25, NS21, NS24, NF21, UF1, US1, US24 |
| 27 |
Applicable for process connection 5. |
| 28 |
Applicable for process connection 3 and 4. |
| 29 |
Applicable for option code UN and N1. |
| 30 |
Not applicable for plug option code UN. |
| 31 |
Not applicable for option code N1, N2, and N3. |
| 32 |
Applicable for Wetted parts material code S. |
| 33 |
Not applicable for electrical connection codes 0, 2, and 4. |
| 34 |
See 'Ordering Information' in GS. |
Loading...