YCA Store | Products | Transmitters | DSS | Model EJX310A

Product Categories

#	Model/Spec/Part No.	Description	Notes
EJX310A Absolute Pressure Transmitter (GS 01C25D01-01EN)
01 Output Signal (Please make one selection)
	-D	4 to 20 mA DC with digital communication (BRAIN protocol)
	-E	4 to 20 mA DC with digital communication (HART protocol)
	-F	Digital communication (FOUNDATION Fieldbus protocol)
	-G	Digital communication (PROFIBUS PA protocol)
	-J	4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
02 Measurement Span (Capsule) (Please make one selection)
	A	2.5 to 500 psia
	B	10 to 2,300 psia
	M	0.39 to 38 inHg
03 Wetted Parts Material
	S	Cover flange: ASTM CF-8M, Capsule: Hastelloy C-276(diaphragm), (F)316L SST(others), Vent plug: 316 SST, Process connector: ASTM CF-8M
04 Process Connections (Please make one selection)
	B	Diaphragm seal system for general use
	G	Diaphragm seal system for vacuum service
05 Bolts and Nuts Material (Please make one selection)
	C	ASTM grade660 stainless steel
	G	316L SST
	J	ASTM-B7 carbon steel
06 Installation
	-9	Horizontal impulse piping type, left side high pressure
07 Amplifier Housing (Please make one selection)
	1	Material: Cast-aluminum alloy
	2	Material: ASTM CF-8M
	3	Material: Cast aluminum alloy with corrosion resistance properties
08 Electrical Connection (2 Connectors) (Please make one selection)
	0	G 1/2 female, one electrical connection without blind plugs
	2	1/2 NPT female, two electrical connections without blind plugs
	4	M20 female, two electrical connections without blind plugs
	5	G1/2 female, two electrical connections with a blind plug
	7	1/2 NPT female, two electrical connections with a blind plug
	9	M20 female, two electrical connections with a blind plug
	A	G 1/2 female, two electrical connections with a 316 SST blind plug
	C	1/2 NPT female, two electrical connections with a 316 SST blind plug
	D	M20 female, two electrical connections with a 316 SST blind plug
09 Integral Indicator (Please make one selection)
	D	Digital Indicator
	E	Digital indicator with a range setting switch
	N	None
10 Mounting Bracket (Please make one selection)
	B	304 SST 2-inch pipe mounting(flat type)
	J	316 SST 2-inch pipe mounting(flat type)
	N	None
001 Optional Features
	/CF1	CSA Explosionproof Approval (For Output Code -D, -E, -J, -F, or -G)
	/CS1	CSA Intrinsically safe Approval (For Output Code -D, -E, or -J)
	/CS15	CSA Intrinsically safe approval (For Output Signal code -F)
	/CU1	Combined /CF1 and /CS1 (For Output Code -D, -E, or -J)
	/FF1	FM Explosionproof Approval (For Output Code -D, -E, -J, -F, or -G)
	/FS1	FM Intrinsically Safe Approval (For Output Code -D, -E, or -J)
	/FS15	FM Intrinsically Safe and Non-incendive Approval (For Output Code -F)
	/FU1	Combined /FF1 and /FS1 (For Output Code -D, -E, or -J)
	/KF22	ATEX Flameproof Approval (For Output Code -D, -E, -J, -F, or -G)
	/KN26	ATEX Type n Approval (For Output Code -F or -G)
	/KS21	ATEX Intrinsically safe Approval (For Output Code -D, -E, or -J)
	/KS26	ATEX Intrinsically safe Approval (For Output Code -F or -G)
	/KU22	Combined /KF22, /KS21, and Type n (For Output Code -D, -E, or -J)
	/NF21	NEPSI Flameproof and Dust Ignition Proof approval (Output Signal code -D, -E, or -J)
	/NS21	NEPSI Intrinsically safe Approval (For Output Signal code -D, -E, or -J)
	/NS25	NEPSI Intrinsic safety Approval (Output Signal code -F)
	/PF22	KOSHA Flameproof Approval (For Output Signal code -D or -J)
	/PF23	Korea Flameproof and Dust Ignition Proof
	/PS21	KOSHA Intrinsically safe Approval (For Output Signal code -D or -J)
	/SF22	IECEx flameproof approval (For Output Signal code -D, -J, -F, -G or -Q)
	/SS26	IECEx Intrinsically safe Approval (Output Signal code -F and -G)
	/SU22	IECEx Intrinsically safe and flameproof (For Output Signal code -D or -J)
	/UF1	INMETRO Flameproof Approval (For Output Signal code -D, -E, or -J)
	/US1	INMETRO Intrinsically safe Approval (For Output Signal code -D, -E, or - J)
	/V1U1	Combination Approval (/KU22, /FU1, and /CU1) (For Output Signal code -D, -E, or -J)
003 Optional Features
	/D1	P calibration (psi unit)
	/D3	bar calibration (bar unit)
	/D4	M calibration (kgf/cm2 unit)
004 Optional Features
	/P1	Color change, amplifier cover only Munsell code ; N1.5, black
	/P2	Color change, amplifier cover only Munsell code ; 7.5BG4/1.5, jade green
	/P7	Color change, amplifier cover only Metallic silver
	/PR	Color change, both sides of amplifier cover Munsell code ; 7.5 R4/14, Red
005 Optional Features
	/X2	High anti-corrosion coating
006 Optional Features
	/A	Lightning protector
009 Optional Features
	/C1	Output status at CPU failure and hardware error is -5%, 3.2 mA or less.
	/C2	Output signal limits: 3.8 mA to 20.5 mA Output status at CPU failure and hardware error is -5%, 3.2 mA or less.
	/C3	Output signal limits: 3.8 mA to 20.5 mA Output status at CPU failure and hardware error is 110%, 21.6 mA or more.
010 Optional Features
	/CA	Data Configuration for HART communication type (Software damping, Descriptor and Message)
	/CB	Data Configuration for BRAIN communication type (Software damping)
	/CC	Data Configuration for FOUNFATION Fieldbus communication type (Software damping)
	/CD	Data configuration for PROFIBUS PA communication type (Software damping)
014 Optional Features
	/N4	Stainless steel tag plate wired onto the transmitter	1
015 Optional Features
	/S1	130Pa abs(1mmHg abs) calibration
017 Optional Features
	/AL	Status output
026 Optional Features
	/DG6	Multi-sensing process monitoring function: Impulse Line Blockage Detection and Heat trace monitoring
027 Optional Features
	/HC	316 SST exterior parts

Your Product

Subgroup | Page

DSS | Model EJX310A

Model

EJX310A

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted. Refer to the "Ordering Information" section of the GS noted.
How to build MS Code	One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear.
Example MS Code	EJX310A-EMSGG-912DN/KF22

**Product Notes**
Note Id	Description
1	Limited to 16 Characters Maximum. Must be special ordered if more digits are required.

**Reference Links**
Link
Specification Selection System (SSS) Software

EJX310A Absolute Pressure Transmitter (GS 01C25D01-01EN)

01 Output Signal (Please make one selection)

02 Measurement Span (Capsule) (Please make one selection)

03 Wetted Parts Material

04 Process Connections (Please make one selection)

05 Bolts and Nuts Material (Please make one selection)

06 Installation

07 Amplifier Housing (Please make one selection)

08 Electrical Connection (2 Connectors) (Please make one selection)

09 Integral Indicator (Please make one selection)

10 Mounting Bracket (Please make one selection)

001 Optional Features

003 Optional Features

004 Optional Features

005 Optional Features

006 Optional Features

009 Optional Features

010 Optional Features

014 Optional Features

015 Optional Features

017 Optional Features

026 Optional Features

027 Optional Features

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Output Signal
(Please make one selection)

02 Measurement Span (Capsule)
(Please make one selection)

04 Process Connections
(Please make one selection)

05 Bolts and Nuts Material
(Please make one selection)

07 Amplifier Housing
(Please make one selection)

08 Electrical Connection (2 Connectors)
(Please make one selection)

09 Integral Indicator
(Please make one selection)

10 Mounting Bracket
(Please make one selection)