YCA Store | Products | Transmitters | Wika Diaphragm Seals | WIKA Diaphragm Seal (PMC)

Product Categories

#	Model/Spec/Part No.	Description		Notes
R/PMC Pulp & Paper Diaphragm Seal (RJGW PWx.xK or PWx.xM)
01 Process Connection Size and Type (Please make one selection)			8
	-C1	1.5-inch Flush-mount Threaded Type (M44 x 1.25-inch Threaded Connection)		2
	-A1	1.0-inch Flush-mount Sleeve Type (One Retaining Bolt Design)		1
	-B1	1.5-inch Flush-mount Sleeve Type (Two Retaining Bolt Design)		1
	-D1	0.75-inch MNPT Flush-mount Threaded Type		3
	-E1	1.0-inch MNPT Flush-mount Threaded Type		3
02 Always			8
	N	Always N
03 Always			8
	N	Always N
04 Upper Housing / Diaphragm Material (Wetted) (Please make one selection)			8
	SHC	316 SST / Hastelloy C-276
	SSS	316 SST / 316L SST
05 Always			8
	N	Always N
06 Lower Housing Material (Weld Spud Material) (Wetted) (Please make one selection)			8
	0	No Weld Spud supplied		4
	S	316 SST Weld Spud		5
07 Lower Housing Type (Weld Spud Type) (Please make one selection)			8
	0	No Lower Housing (Weld Spud) (For Process Connection Size and Type code -D1 and -E1)		4
	1	Lower Housing (Weld Spud) (For Process Connection Size and Type code -A1 and -B1)		6
	2	Lower Housing (Weld Spud) (For Process Connection Size and Type code -C1)		7
08 Fill Fluid (Please make one selection)			8
	A	DC200-10 Silicone (KN68) (-103 to +482 DegF)
	B	DC704 Silicone (KN32) (-13 to +752 DegF)
09 Always			8
	CCC	Close-coupled Connection (For use with an inline mount transmitter)		8
10 Always			8
	DGP	Attach one seal to an inline mount gauge pressure transmitter (EJA530E or EJX530A)		8
001 Diaphragm Options (Option)			8
	/NS	FEP Coated Diaphragm (For Non-stick application)
002 Special Service (Option)			8
	/K	Degreased
003 Certificates			8
	/C	Calibration Certificate
	/H	Helium Leak Test Certificate
	/M	Material Cert for Wetted Materials
	/NM	NACE Cert of Conformance
004 Welding Heat Sink			8
	/HS	316L SST Welding Heat Sink

Your Product

Subgroup | Page

Wika Diaphragm Seals | WIKA Diaphragm Seal (PMC)

Model

R/PMC

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order
How to build MS Code	Specify the Model Number by choosing one code for each section. One code or no code may be chosen from those fields marked (option).
Example MS Code	R/PMC-C1NNSSSNS2ACCCDGP/HS
IMPORTANT	Does your customer need a welding heat sink? If Yes, include the /HS option.
Notes	Questions? Contact Yokogawa's Technical Assistance Center (TAC)
Technical Assistance Center (TAC)	support@us.yokogawa.com 800-524-7378

**Product Notes**
Note Id	Description
1	Requires Lower Housing Material (Weld Spud Material)(Wetted) code S or H and Lower Housing Type (Weld Spud Type) code 1.
2	Requires Lower Housing Material (Weld Spud Material)(Wetted) code S or H and Lower Housing Type (Weld Spud Type) code 2.
3	Requires Lower Housing Material (Weld Spud Material)(Wetted) code 0 and Lower Housing Type (Weld Spud Type) code 0.
4	Required for Process Connection Size and Type code -D1 and -E1.
5	Applicable for Process Connection Size and Type code -A1, -B1, and -C1.
6	Applicable for Process Connection Size and Type code -A1 and -B1.
7	Applicable for Process Connection Size and Type code -C1.
8	EJA530E or EJX530A transmitter requires Process Connection code 4.

R/PMC Pulp & Paper Diaphragm Seal (RJGW PWx.xK or PWx.xM)

01 Process Connection Size and Type (Please make one selection)

02 Always

03 Always

04 Upper Housing / Diaphragm Material (Wetted) (Please make one selection)

05 Always

06 Lower Housing Material (Weld Spud Material) (Wetted) (Please make one selection)

07 Lower Housing Type (Weld Spud Type) (Please make one selection)

08 Fill Fluid (Please make one selection)

09 Always

10 Always

001 Diaphragm Options (Option)

002 Special Service (Option)

003 Certificates

004 Welding Heat Sink

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Process Connection Size and Type
(Please make one selection)

04 Upper Housing / Diaphragm Material (Wetted)
(Please make one selection)

06 Lower Housing Material (Weld Spud Material) (Wetted)
(Please make one selection)

07 Lower Housing Type (Weld Spud Type)
(Please make one selection)

08 Fill Fluid
(Please make one selection)