YCA Store | Products | Transmitters | Gauge Pressure | Model EJX438A

Product Categories

#	Model/Spec/Part No.	Description	Notes
EJX438A Gauge Pressure Transmitter with Remote Seal [Style: S2] (GS 01C25B01-01EN)
01 Output Signal (Please make one selection)
	-D	4 to 20 mA DC with digital communication (BRAIN protocol)
	-E	4 to 20 mA DC with digital communication (HART protocol)
	-F	Digital communication (FOUNDATION Fieldbus protocol)
	-G	Digital communication (PROFIBUS PA protocol)
	-J	4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
02 Measurement Span (Capsule) (Please make one selection)
	A	5 to 500 psig
	B	14 to 2,300 psig
03 Wetted Parts Material (Transmitter)
	S	Always S
04 Process Connections
	C	Always C
05 Bolts and Nuts Material (Please make one selection)
	C	ASTM grade660 stainless steel
	G	316L SST
	J	ASTM-B7 carbon steel
06 Installation
	-9	Horizontal impulse piping type, left side high pressure
07 Amplifier Housing (Please make one selection)
	1	Material: Cast-aluminum alloy
	2	Material: ASTM CF-8M	1
	3	Material: Cast aluminum alloy with corrosion resistance properties	1
08 Electrical Connection (2 Connectors) (Please make one selection)
	2	1/2 NPT female, two electrical connections without blind plugs
	4	M20 female, two electrical connections without blind plugs
	7	1/2 NPT female, two electrical connections with a blind plug	18
	9	M20 female, two electrical connections with a blind plug	18
	C	1/2 NPT female, two electrical connections with a 316 SST blind plug
	D	M20 female, two electrical connections with a 316 SST blind plug
09 Integral Indicator (Please make one selection)
	D	Digital indicator
	E	Digital indicator with the range setting switch	2
	N	None
10 Mounting Bracket (Please make one selection)
	B	304 SST 2-inch pipe mounting (flat type)
	J	316 SST 2-inch pipe mounting(flat type)
	N	None
11 Process Connection Style (Please make one selection)
	-E	Extended type
	-W	Flush type
12 Flange Rating (Please make one selection)
	A1	ANSI class 150
	A2	ANSI class 300
	A4	ANSI class 600
13 Process Connection Size (Please make one selection)
	2	2-inch (50mm)
	3	3-inch (80mm)
	4	4-inch (100mm)
	8	1 1/2-inch (40mm)
14 Flange Material (Please make one selection)
	A	JIS S25C
	B	304 SST or F304 SST
	C	316 SST or F316 SST
15 Gasket Contact Surface (Please make one selection)
	1	Serration	5
	2	Flat (no serration)
16 Wetted Parts Material (Remote Seal) (Please make one selection)
	HW	Diaphragm: Hastelloy C-276 Others: Hastelloy C-276
	SE	Diaphragm: 316L SST Pipe: 316 SST Others: 316 SST
	SW	Diaphragm: 316L SST, Others: 316L SST
	TW	Diaphragm: Tantalum Others: Tantalum	4
	UW	Diaphragm: Titanium Others: Titanium
17 Flushing Ring (Please make one selection)
	0	None
	B	Ring: Straighted type, Drain/Vent plugs: 1/4NPT connection, Material: 316 SST
	D	Ring: Reducer type, Drain/Vent plugs: 1/4NPT connection, Material: 316 SST
18 Diaphragm Extension Length (Please make one selection)
	0	None
	1	Length (X2) =50mm
	3	Length (X2) =100mm
	5	Length (X2) =150mm
19 Fill Fluid (Please make one selection)
	-A	for general use (silicone oil) [process temp.]-10 to 250 degC [ambient temp.]-10 to 60 degC
	-B	for general use (silicone oil) [process temp.]-30 to 180 degC [ambient temp.]-15 to 60 degC
	-C	for high temperature use (silicone oil) [process temp.]10 to 310 degC [ambient temp.]10 to 60 degC	3
	-D	for oil-prohibited use (fluorinated oil) [process temp.]-20 to 120 degC [ambient temp.]-10 to 60 degC	6
	-E	for low temperature use(ethylene glycol) [process temp.]-50 to 100 degC [ambient temp.]-40 to 60 degC
20 Capillary Connection (Please make one selection)
	A	Side of Diaphragm seal unit
	B	Back of Diaphragm seal unit
21 Specifications
	2	Always 2
22 Capillary Length (Please make one selection)
	1	1m
	2	2m
	3	3m
	4	4m
	5	5m
	6	6m	7
	7	7m	7
	8	8m	7
	9	9m	7
	A	10m	7
001 Optional Features
	/CF1	CSA Explosionproof Approval (For Output Code -D, -E, -J, -F, or -G)
	/CS1	CSA Intrinsically safe Approval (For Output Code -D, -E, or -J)	8
	/CU1	Combined /CF1 and /CS1 (For Output Code -D, -E, or -J)	8
	/FF1	FM Explosionproof Approval (For Output Code -D, -E, -J, -F, or -G)
	/FS1	FM Intrinsically Safe Approval (For Output Code -D, -E, or -J)	8
	/FS15	FM Intrinsically Safe and Non-incendive Approval (For Output Code -F)	8
	/FU1	Combined /FF1 and /FS1 (For Output Code -D, -E, or -J)	8
	/KF22	ATEX Flameproof Approval (For Output Code -D, -E, -J, -F, or -G)
	/KN26	ATEX Type n Approval (For Output Code -F or -G)	8
	/KS21	ATEX Intrinsically safe Approval (For Output Code -D, -E, or -J)	8
	/KS26	ATEX Intrinsically safe Approval (For Output Code -F or -G)	8
	/KU22	Combined /KF22, /KS21, and Type n (For Output Code -D, -E, or -J)	8
	/NF21	NEPSI Flameproof and Dust Ignition Proof approval (Output Signal code -D, -E, or -J)	8
	/SF22	IECEx flameproof approval (For Output Signal code -D, -J, -F, -G or -Q)
	/SS25	IECEx Intrinsically safe and Type n Approval (For Output Code -F)	8
	/SU22	IECEx Intrinsically safe and flameproof (For Output Signal code -D or -J)	8
	/V1U1	Combination Approval (/KU22, /FU1, and /CU1) (For Output Signal code -D, -E, or -J)	8
003 Optional Features
	/D1	P calibration (psi unit)
	/D3	bar calibration (bar unit)
	/D4	M calibration (kgf/cm2 unit)
004 Optional Features
	/P1	Color change, amplifier cover only Munsell code ; N1.5, black	9
	/P2	Color change, amplifier cover only Munsell code ; 7.5BG4/1.5, jade green	9
	/P7	Color change, amplifier cover only Metallic silver	9
	/PR	Color change, amplifier and terminal covers Munsell code ; 7.5 R4/14, Red
005 Optional Features
	/X2	High anti-corrosion coating
006 Optional Features
	/A	Lightning protector
007 Optional Features
	/K1	Degrease cleansing treatment
	/K5	Degrease cleansing and dehydrating treatment
009 Optional Features
	/C1	Output status at CPU failure and hardware error is -5%, 3.2 mA or less.
	/C2	Output signal limits: 3.8 mA to 20.5 mA Output status at CPU failure and hardware error is -5%, 3.2 mA or less.
	/C3	Output signal limits: 3.8 mA to 20.5 mA Output status at CPU failure and hardware error is 110%, 21.6 mA or more.
010 Optional Features
	/CA	Data Configuration for HART communication type (Software damping, Descriptor and Message)
	/CB	Data Configuration for BRAIN communication type (Software damping)
	/CC	Data Configuration for FOUNDATION Fieldbus communication type (Software damping)
	/CD	Data configuration for PROFIBUS PA communication type (Software damping)
011 Optional Features
	/M2E	Material certificate:flange,block,pipe, base
	/M2W	Material certificate:flange, block
	/M5W	Material certificate:flange, block, ring
012 Optional Features
	/T52	Pressure test/leak test certificate Test pressure:3 MPa (430 psi)
	/T53	Pressure test/leak test certificate Test pressure:3.5 MPa (500 psi)
	/T55	Pressure test/leak test certificate Test pressure:7 MPa (1000 psi)
	/T56	Pressure test/leak test certificate Test pressure:8 MPa (1160 psi)
	/T58	Pressure test/leak test certificate Test pressure:16 MPa (2300 psi)
014 Optional Features
	/N4	Stainless steel tag plate wired onto the transmitter	19
015 Optional Features
	/TF1	Teflon film	12
016 Optional Features
	/A1	Gold-plated diaphragm	13
017 Optional Features
	/AL	Status output	11
018 Optional Features
	/R	Operating temperature correction
021 Optional Features
	/V	Capillary without PVC sheaths
022 Optional Features
	/EE	Software Download
027 Optional Features
	/HC	316 SST exterior parts	10
039 Optional Features
	/YP	Parameter List

Your Product

Subgroup | Page

Gauge Pressure | Model EJX438A

Model

EJX438A

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted. Refer to the "Ordering Information" section of the GS noted.
How to build MS Code	One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear.
Example MS Code	EJX438A-DASCG-912EN-WA13B1SW00-BA25/FF1/D1

**Product Notes**
Note Id	Description
1	Not applicable with Electrical Connection code 7 and 9.
2	Not applicable with Output Signal code -F.
3	Not applicable for Wetted Parts Material (Remote Seal) code TW.
4	Not applicable for Flushing Connection code B.
5	Not avialable for Wetted Parts Material (Remote Seal) code HW, TW, or UW.
6	Requires Oil-prohibited Use code /K1 or /K5.
7	Not applicable for Wetted Parts Material (Remote Seal) code HW, TW, or UW.
8	Not applicable of Status Output code /AL.
9	Not applicable with Amplifier Housing code 2.
10	The option included in Amplifier Housing code 2.
11	Not applicable for Output Signal code -F.
12	Applicable for Process Connection Style code -W and Flushing Ring code 0.
13	Applicable for Wetted Parts Material (Remote Seal) code SW, SE, and HW.
14	Order as a separate line item.
15	One Instruction Manual (IM) is included (free of charge) with each transmitter (except project orders). IM's can be downloaded for free at our website: www.fibu.yokogawa-usa.com
16	Cost is determined by multplying the List Price of the unit by the percentage associated with the extended warranty. The extension is in addition to the standard warranty and is valid for product that remains in YCA territory.
17	Note not used
18	Material of blind plug is aluminum or 304 SST.
19	Limited to 16 Characters Maximum. Must be special ordered if more digits are required.

EJX438A Gauge Pressure Transmitter with Remote Seal [Style: S2] (GS 01C25B01-01EN)

01 Output Signal (Please make one selection)

02 Measurement Span (Capsule) (Please make one selection)

03 Wetted Parts Material (Transmitter)

04 Process Connections

05 Bolts and Nuts Material (Please make one selection)

06 Installation

07 Amplifier Housing (Please make one selection)

08 Electrical Connection (2 Connectors) (Please make one selection)

09 Integral Indicator (Please make one selection)

10 Mounting Bracket (Please make one selection)

11 Process Connection Style (Please make one selection)

12 Flange Rating (Please make one selection)

13 Process Connection Size (Please make one selection)

14 Flange Material (Please make one selection)

15 Gasket Contact Surface (Please make one selection)

16 Wetted Parts Material (Remote Seal) (Please make one selection)

17 Flushing Ring (Please make one selection)

18 Diaphragm Extension Length (Please make one selection)

19 Fill Fluid (Please make one selection)

20 Capillary Connection (Please make one selection)

21 Specifications

22 Capillary Length (Please make one selection)

001 Optional Features

003 Optional Features

004 Optional Features

005 Optional Features

006 Optional Features

007 Optional Features

009 Optional Features

010 Optional Features

011 Optional Features

012 Optional Features

014 Optional Features

015 Optional Features

016 Optional Features

017 Optional Features

018 Optional Features

021 Optional Features

022 Optional Features

027 Optional Features

039 Optional Features

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Output Signal
(Please make one selection)

02 Measurement Span (Capsule)
(Please make one selection)

05 Bolts and Nuts Material
(Please make one selection)

07 Amplifier Housing
(Please make one selection)

08 Electrical Connection (2 Connectors)
(Please make one selection)

09 Integral Indicator
(Please make one selection)

10 Mounting Bracket
(Please make one selection)

11 Process Connection Style
(Please make one selection)

12 Flange Rating
(Please make one selection)

13 Process Connection Size
(Please make one selection)

14 Flange Material
(Please make one selection)

15 Gasket Contact Surface
(Please make one selection)

16 Wetted Parts Material (Remote Seal)
(Please make one selection)

17 Flushing Ring
(Please make one selection)

18 Diaphragm Extension Length
(Please make one selection)

19 Fill Fluid
(Please make one selection)

20 Capillary Connection
(Please make one selection)

22 Capillary Length
(Please make one selection)