Loading...| # | Model/Spec/Part No. | Description | CF | Pref | Notes |
|---|
Category
Transmitters
Subgroup | Page
Differential Pressure | Model EJA110E
EJA110E/1000
Configuration
Parts/Accessories (separate line)
Notes
| Title | Description |
|---|---|
| How to Order | The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted. Refer to the "Ordering Information" section of the GS noted. |
| How to build MS Code | One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear. |
| Example MS Code | EJA110E-JMS4G-912NN/FF1/D1 |
| Note Id | Description |
|---|---|
| 1 | Applicable for Wetted Parts Material code S. |
| 2 | Applicable for Wetted Parts Material code H, M, T, A, D, or B. |
| 3 | Not applicable for Process Connection code W. |
| 4 | Use for 3rd party diaphragm seal attachment. |
| 5 | Choose for single diaphragm seal attachment. |
| 6 | Choose for dual diaphragm seals attachment. |
| 7 | Not applicable for Electrical Connection code 0, 5, 7, 9, or A. |
| 8 | Not applicable for Electrical Connection code 0, 5, 7, or 9. |
| 9 | Material of blind plug is aluminum alloy. |
| 10 | Material of blind plug is 304 SST. |
| 11 | Not applicable for Output Signal code -G. |
| 12 | Not applicable for Output Signal code -F. |
| 13 | Applicable for Installation code B. |
| 14 | Applicable for Electrical Connection code 2, 4, 7, 9, C, or D. |
| 15 | Applicable for Measurement Span (Capsule) code M, H, or V with Wetted Parts Material code S; not applicable for Output Signal code -Q or Option code /A2. |
| 16 | This option is standard with Amplifier Housing code 2. |
| 17 | Applicable to Measurement Span (Capsule) code M or H; not applicable to Wetted Material code S or Option codes /HG, /K2, /K3, /K6, /PE3, or /T13. |
| 18 | Tokuchu approval is required before an order for this option can be accepted. |
| 19 | Applicable for Meaasurement Span (Capsule) code M, H, or V with Wetted Parts Material code S or L. |
| 20 | Not applicable with Amplifier Housing code 2 or 3. |
| 21 | Applicable for Wetted Parts Material code S, M, H, or T. |
| 22 | Applicable for Installation code 7 with Wetted Parts Material code S, H, M, or T. |
| 23 | Applicable for Wetted Parts Material code S, Process Connection code 0 or 5, and Installation code 8 or 9. Not applicable for Option code /U1, /N2, /N3, or /M11. |
| 24 | Applicable for Wetted Parts Material code S or L. |
| 25 | Applicable for Wetted Parts Material code S or L; Not applicable for Agency Approval Code (Option) code /FF1. /FS1, /FS15, or /FU1. |
| 26 | Applicable for Wetted Parts Material code S, M, H, or T; Process Connection code 3, 4, or 5; Installation code 9, and Mounting Bracket code N. |
| 27 | Refer to the indicated GS for information. |
| 28 | Applicable for Measurment Span (Capsule) code M, H, or V with Wetted Parts Material code S. If compliance with category III is required, specify Option code /HG. |
| 29 | Applicable for Process Connections code 0 or 5. Not applicable with Process Connection W. |
| 30 | Applicable for Process Connection code 1, 2, 3, or 4. Not applicable with Process Connection W. |
| 31 | Applicable for Option code /HG. |
| 32 | Limited to 16 Characters Maximum. Must be special ordered if more digits are required. |
| 33 | Not applicable for electrical connection codes 0, 2, and 4. |
| 34 | Applicable for process connection codes 0, 1, 2, 3, 4, 5. |
Add Item to Quote
Please select atleast one item to proceed.
Configuration Error
Selected configuration is not valid. Please read notes and make corrections.