YCA Store | Products | High Frequency Instruments | Digital Oscilloscopes | DLM5000/DLM5000HD - Probes and Accessories

#	Model/Spec/Part No.	Description	CF	Pref		Notes

Parts / Accessories

(Multiple selections allowed, creates separate lines on the quote.)

Passive Voltage Probes
	701937	Passive Probe, 600Vp, 500MHz, 10:1, 10MΩ, 1.2 m (DLM3000)	1
	701938	Passive Probe, 600Vp, 200MHz, 10:1, 10MΩ, 1.5 m (DLM3000)
	701939	500MHz Passive Probe
	701944	Passive Probe, 1000Vrms, 400MHz, 100:1, 50MΩ, 1.2m, 'Mini'
	701945	Passive Probe, 1000Vrms, 250MHz, 100:1, 50MΩ, 3.0m, 'Mini'
	701946	Passive Probe, 400Vrms, 500MHz, 10:1, 10MΩ, 1.3m, 'Mini' w/ accy kit,
	701974	Passive Probe, 20Vrms, 5GHz, 10:1, 20:1, 500Ω, 1000Ω, 1.1m, 'Zo low cap', 'PBL5000'	1
	702906	Passive Probe, 1000Vrms, 200 MHz, 10:1, 10MΩ, 2.5m, Operates over temperature range of -40° to +85° C.
	B9017ZT	Passive Probe, 30000Vp-CAT2, 5MHz, 1000:1, 500MΩ, 6.5Ft., 'HV'	2,6
Passive Voltage Probe Accessories
	366945	Accessory for 701938/701939 (DLM2000 Probe) - Printed Circuit Board Adapter (10 adapters)
	366946	Accessory for 701938/701939 (DLM2000 Probe) - Solder-in Adapter (3 adapters)
	700971	Accessory for 701938/701939/701943 - Mini-Clip Adapter
	700972	Accessory for 701938/701939/701943 - BNC Adapter
	700973	Accessory for 701938/701939/701943 - Ground Lead
	701975	DC Block Capacitor, 50Ω, use to remove DC / bias voltage, for use with the PBL5000 probe
	B8099NL	702902 / 702906 4mm Conversion Adapter, Pincher tip end
	B8099NM	702902 / 702906 4mm Conversion Adapter, Ground lead end
	B9852BD	Accessory for 701938/701939/701943 - Ground Lead
	B9852BE	Accessory for 701938/701939/701943 - Pinchers Tip
	B9852BF	Accessory for 701938/701939/701943 - IC Test Tip
	B9852BG	Accessory for 701938/701939/701943 - Ground Attachment
Active Probes
	700939	Active Probe, 10Vp, 900MHz, 10:1, 2.5MΩ, 1.5m, 'FET Probe'
	701912	Active Probe, 25Vp, 1.0GHz, 10:1, 100kΩ, 1.2m, w/ Yokogawa Probe I/F, 'PBA1000'
	701913	Active Probe, 25Vp, 2.5GHz, 10:1, 100kΩ, 1.2m, w/ Yokogawa Probe I/F, 'PBA2500'
	701914	Active Probe, 25Vp, 1.5GHz, 10:1, 100kΩ, 1.2m, w/ Yokogawa Probe I/F, 'PBA1500'
Active Probe Accessories
	700971	Accessory for 701938/701939/701943 - Mini-Clip Adapter
	700977	700939 Accessories kit
Differential Probes
	701923	Differential Probe, 5Vp DIFF, 7Vp CM, 2GHz, 10:1, 50kΩ,1.2m, 'PBD2000'
	701924	Differential Probe, 25Vp DIFF, 35Vp CM, 1GHz, 50:1, 1MΩ, 1.2m, 'PBDH1000'
	701925	PBDH0500 Differential Probe
	701927	Differential Probe 1400Vp,150MHz, 2.0m,'HV Differential',Yokogawa probe I/F	1,5
	701977	Differential Probe	3
	701978	Differential Probe	3
Differential Probe Accessories
	700938-3-D	Active Probe Power Supply - 2 LEMO output jacks
	701915	Accessory Kit (std) for 701913 & 701923 (12 pins, microclip, lead wire set, L pins, and driver)
	701934-D	Probe Power Supply
	B8099LF	701927 Extension lead, Black, 1m
	B8099LG	701927 Extension lead, Red, 1m
	B8099LJ	701927 100Ω resistance adapter ( (yellow)
	B8099LK	701927 150Ω resistance adapater (green), required with B8099LG/B8099LJ extension lead
	B9852MF	701922 Pincher tip replacement black
	B9852MG	701922 Pincher tip replacement red
	B9852MM	700924 Pincher tip replacement black
	B9852MN	700924 Pincher tip replacement red
	B9852SZ	Accessory Kit - complete - for 701920 Diff Probe
Current Probes
	701917	Current Probe, 5Arms, DC-50MHz., 1%/3%, 1A:1V, 1.5m, 5mm max dia.	3
	701918	Current Probe, 5Arms, DC-120MHz., 1%/3%, 1A:1V, 1.5m, 5mm max dia.	3
	701928	Current Probe, 30Arms, DC-100MHz, 1%/2%, 10A:1V, 1.5m, 5mm max cond. Dia., 'PBC100' (fits Yokogawa scope Probe I/F only)	3
	701929	Current Probe, 30Arms, DC-50MHz, 1%/2%, 10A:1V, 1.5m, 5mm max cond. Dia., 'PBC050' (fits Yokogawa scope Probe I/F only)	3
	701930	Current Probe, 150Arms, DC-10MHz, 1%/2%, 100A:1V, 1.0m, 20mm max cond. Dia.	3
	701931	Current Probe, 500Arms, DC-2MHz, 1%/2%, 100:A:1V,1.0m, 20mm max cond. Dia.	3
	701932	Current Probe, 30Arms, DC-100MHz, 1%/2%, 10A:1V, 1.0m, 5mm max cond. Dia.	3
	701933	Current Probe, 30Arms, DC-50MHz, 1%/2%, 10A:1V, 1.5m, 5mm max cond. Dia.	3
	702915	Current probe	3
	702916	Current probe	3
	CT1000S-L03	Cable Length 3m	3
	CT1000S-L05	Cable Length 5m	3
	CT1000S-L10	Cable Length 10m	3
Logic Probes
	701988	Logic Probe, 8-bit, 100MHz, 40Vp, 1MΩ, 2.54 pitch, 'PBL100'
	701989	Logic Probe, 8-bit, 250MHz, 100kΩ, 40Vp, 2.54 pitch, per-bit threshold adj, 'PBL250'
Logic Probe Accessories
	701909	709898 Accessory kit
	B8099BS	701988 Logic probe replacement lead set
	B8099BT	701989 Logic probe replacement lead set
	B8099BZ	701989 Logic probe replacement cable 1m
	B9852ES	IC-Clips for logic probes & passive probes
	B9852VN	701988 Logic probe replacement cable 1.5m
Other Accessories
	701919	Probe Stand - Round base w/ single articulating arm
	701968	Soft Carrying Case
	701969-E	Rack mount kit for DLM4000
	701982-01	Connection Cable, Cable length 1 meter
	701982-02	Connection Cable, Cable length 2.8 meter
	B9988AE	Printer paper - thermal, 10 meters - must order multiples of 10; price is for one roll
	M1114DV	Hard shipping case -DLM4000, requires 701968 soft case
Cables, Adapters, Connectors
	366921	BNC to Binding Post Adapter
	366922	Adapter, non-isolated, BNC-female w/ Dual banana-plug-male, 42Vp
	366923	Adapter, non-isolated, BNC-Tee, BNC-male with two BNC-females, 42Vp
	366924	Cable, non-isolated BNC Cable, 1m
	366925	Cable, non-isolated BNC Cable, 2m
	366926	Test Lead, non-isolated, 1:1 BNC-male w/ alligator-clip pair, 42Vp, 3ft
	366961	Test Lead, non-isolated, 1:1 Dual Banana Plug w/ alligator-clip pair, 42Vp, 1.2m	8
	366973	Cable, Go/NoGo
	700976	Terminator, 50Ω feed-thru
	701901	BNC to Safety Adapter Lead, 1000 V
	701902	Safety BNC to BNC Cable 1 Meter
	701903	Safety BNC to BNC Cable 2 Meter
	701906	Clips, Long Test Clip pair w/ safety-banana-jack, red/black, 1000Vrms CAT3, 0.3m, for use with 701901/758917/M1114CH	9
	701954	Clips, Large Dolphin Clip pair w/ safety-banana-jack, red/black, 1000Vrms CAT2, for use with 701901/758917/M1114CH	9
	720911	Ext I/O Cable, RJ-11 w/ tinned-ends, 1.5 Meter
	751512	Banana Male-to-Binding Post Adapter
	758917	Lead Set, 30 inch, with Safety Banana Plugs	7
	758921	Banana Plug to Spade Lug Conversion Adapter
	758922	Alligator Clip Adapter Set Rated 300V
	758924	Banana Jack to Safety BNC Conversion Adapter
	758929	Alligator Clip Adapter Set Rated 1000V
	M1114AQ-A	Adapter, BNC-isolated-male w/ Dual safety-banana-jack-female, 500V CAT1, 150V CAT2, industrial grade

Your Product

Subgroup | Page

Digital Oscilloscopes | DLM5000/DLM5000HD - Probes and Accessories

Model

701931

Configuration

Parts/Accessories (separate line)

View Cart

Note Id	Description
1	For any scope with 50O Int or ext. termination 700976
2	Observe voltage derating curve; for any scope with 1 MO input.
3	Requires /P8 option or 701934 Probe Power Supply
4	Requires AA batteries, AC adaptor, 701934, or /P8 option
5	Includes 1m extension lead set. 701927 can be used in combination with 701906, 701954, 758921, 758922, 758929, 758931
6	BOP item
7	Combines with 758922/758929/701954 when voltage greater than >42V
8	Combines with 758922/758929/701954 when voltage less than <42V
9	For use with 701901/758917
10	These options go with the 701992 models listed above
11	DLM5000 is compatible with both XViewer and IS8000.
12	DLM5000HD is ONLY compatible with IS8000.
13	When this option is selected, the standard supplied pincher tip is not added.
14	When connecting an extension lead (1 m) to the input lead, use a 150 Ω resistor adapter.

Product Categories

Parts / Accessories

Passive Voltage Probes

Passive Voltage Probe Accessories

Active Probes

Active Probe Accessories

Differential Probes

Differential Probe Accessories

Current Probes

Logic Probes

Logic Probe Accessories

Other Accessories

Cables, Adapters, Connectors

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)