| 1 |
Do not use with seal. |
| 2 |
Not applicable for Electrical Connection code 7 and 9. |
| 3 |
Not applicable to Painting code /P1, /P2, /P7, and /PR. |
| 4 |
Applicable for Wetted Parts Material code S. |
| 5 |
Not applicable with Option code /AL. |
| 6 |
Not used. |
| 7 |
Applicable for Electrical Connection code 2, 4, 7, 9, C, and D. |
| 8 |
Not applicable for option code /AL. |
| 9 |
Not used. |
| 10 |
Applicable for Output Signal code D, E, and F. |
| 11 |
Applicable for Output Signal code D and E. |
| 12 |
Applicable for Output Signal code F only. |
| 13 |
Not applicable to Amplifier Housing code 2 and Output Signal code F. |
| 14 |
Not applicable to Amplifier Housing code 2. |
| 15 |
Note not used. |
| 16 |
Applicable for Wetted Parts Material code S and installation code 7. |
| 17 |
Not used. |
| 18 |
Applicable for Electrical Connection Code 3, 4, and 5. |
| 19 |
Not used. |
| 20 |
Applicable for Process Connection code 3, 4, and 5. Mounting Bracket code N; Wetted Material code S; and Installation code 9. |
| 21 |
Not used. |
| 22 |
Not used. |
| 23 |
Consult Factory for correct use. If compliance with Cat III is needed, use this option. |
| 24 |
Applicable for Process Connection code 5. |
| 25 |
Applicable for Process Connection codes 3 and 4. |
| 26 |
Can not combine with other Tokuchus. |
| 27 |
Order as a separate line item. |
| 28 |
Not used |
| 29 |
Not applicable with option codes /U1, /N2, /N3, and, M11. |
| 30 |
Limited to 16 Characters Maximum. Must be special ordered if more digits are required. |
| 31 |
Bolt option H or K need to be selected for MWP of 41.3 MPa (6000 psi), Bolt Option C, G and J to be selected for MWP of 32 MPa (4500 psi) |
| 32 |
Not applicable for electrical connection codes 0, 2, and 4. |
Loading...