Loading...| # | Model/Spec/Part No. | Description | CF | Pref | Notes |
|---|
Category
Transmitters
Subgroup | Page
Differential Pressure | Model EJX130A
M1100UX
Configuration
Parts/Accessories (separate line)
Notes
| Note Id | Description |
|---|---|
| 1 | Do not use with seal. |
| 2 | Not applicable for Electrical Connection code 7 and 9. |
| 3 | Not applicable to Painting code /P1, /P2, /P7, and /PR. |
| 4 | Applicable for Wetted Parts Material code S. |
| 5 | Not applicable with Option code /AL. |
| 6 | Not used. |
| 7 | Applicable for Electrical Connection code 2, 4, 7, 9, C, and D. |
| 8 | Not applicable for option code /AL. |
| 9 | Not used. |
| 10 | Applicable for Output Signal code D, E, and F. |
| 11 | Applicable for Output Signal code D and E. |
| 12 | Applicable for Output Signal code F only. |
| 13 | Not applicable to Amplifier Housing code 2 and Output Signal code F. |
| 14 | Not applicable to Amplifier Housing code 2. |
| 15 | Note not used. |
| 16 | Applicable for Wetted Parts Material code S and installation code 7. |
| 17 | Not used. |
| 18 | Applicable for Electrical Connection Code 3, 4, and 5. |
| 19 | Not used. |
| 20 | Applicable for Process Connection code 3, 4, and 5. Mounting Bracket code N; Wetted Material code S; and Installation code 9. |
| 21 | Not used. |
| 22 | Not used. |
| 23 | Consult Factory for correct use. If compliance with Cat III is needed, use this option. |
| 24 | Applicable for Process Connection code 5. |
| 25 | Applicable for Process Connection codes 3 and 4. |
| 26 | Can not combine with other Tokuchus. |
| 27 | Order as a separate line item. |
| 28 | Not used |
| 29 | Not applicable with option codes /U1, /N2, /N3, and, M11. |
| 30 | Limited to 16 Characters Maximum. Must be special ordered if more digits are required. |
| 31 | Bolt option H or K need to be selected for MWP of 41.3 MPa (6000 psi), Bolt Option C, G and J to be selected for MWP of 32 MPa (4500 psi) |
| 32 | Not applicable for electrical connection codes 0, 2, and 4. |
Add Item to Quote
Please select atleast one item to proceed.
Configuration Error
Selected configuration is not valid. Please read notes and make corrections.