The 4" ANSI Flange (-C) is suggested for probe lengths of 3m or greater.
2
Derakane coating is recommended for any application up to 250ºF (120ºC) when elements corrosive to the detector may be present, such as those found in chemical incinerators.
3
The Check Valve is recommended for use on the Calibration Gas Port for positive pressure applications to prevent contamination of the calibration line during operation.
Add Item to Quote
Please select atleast one item to proceed.
Configuration Error
Selected configuration is not valid. Please read notes and make corrections.
Email Verification Required
Email Verification link has been sent successfully.
Please follow instruction in email to verify