YCA Store | Products | Transmitters | Gauge Pressure | Model EJX630A

#	Model/Spec/Part No.	Description	CF	Pref		Notes

(Multiple selections allowed, creates separate lines on the quote.)

Bracket Kits (Separate Line Item)
	F9900SJ	2-inch pipe mounting bracket kit (316 SST)

Your Product

Gauge Pressure | Model EJX630A

F9900SJ

View Cart

**General Notes**
Title	Description
How to Order	The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted. Refer to the "Ordering Information" section of the GS noted.
How to build MS Code	One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear.
Example MS Code	EJX630A-JCS4N-02CEL/V1U/D1/M15

**Product Notes**
Note Id	Description
1	Not applicable for combination of Measurement Span code D and Wetted Parts Material code H.
2	Not applicable for Output Signal code -F.
3	Not applicable for Electrical Connection code 0, 5, 7, 9 or A.
4	Material of blind plug is aluminum alloy or 304 SST.
5	Applicable for Electrical Connection code 2, 4, 7, 9, C, and D.
6	Not applicable for option code /AL.
7	Applicable for Electrical Connection code 2, 4, 7, 9, C, and D.
8	Not applicable for Amplifier Housing code 2.
9	This option code included with Amplifier Housing code 2.
10	Defines unit of measure used for MWP on the data plate. If no code is chosen, MWP will be expressed in Mpa
11	If no code is chosen, the transmitter will have the Standard Output Signal with Up-scale failure alarm.
12	Applicable fro Wetted Part Material code S.
13	This option is included in Agency Approval code /V1U.
14	Refer to the "Ordering Information" section of the noted GS.
15	Applicable for Measurement Span code D.
16	The unit of measure on the certificate is always kPa / MPa regardless of the selection of /D1, /D3, /D4.
17	Tokuchu approval is required before an order for this option can be accepted.
18	Limited to 16 Characters Maximum. Must be special ordered if more digits are required.
19	Note not used.
20	Certain conditions and restrictions apply to the use of this option. Refer to GS 01C25F0501E.
21	Note applicable for Option code /FF1.
22	Not applicable for Amplifier Housing code 2
23	Not applicable for electrical connection codes 0, 2, and 4.