| # | Model/Spec/Part No. | Description | CF | Pref | Notes |
|---|
Category
Transmitters
Subgroup | Page
Absolute Pressure | Model EJX610A
F9900SJ
Configuration
Parts/Accessories (separate line)
Notes
| Note Id | Description |
|---|---|
| 1 | Not applicable for combination of Measurement Span code D and Wetted Parts Material code H. |
| 2 | Not applicable for Output Signal code -F. |
| 3 | Not applicable for Electrical Connection code 0, 5, 7, 9, or A. |
| 4 | Material of blind plug is aluminum alloy or 304 SST. |
| 5 | Applicable for Electrical Connection code 2, 4, 7, 9, C, and D. |
| 6 | Not applicable for option code /AL. |
| 7 | Applicable for Electrical Connection code 2, 4, 7, 9, C, and D. |
| 8 | Not applicable for Amplifier Housing code 2. |
| 9 | This option code is included with Amplifier Housing code 2. |
| 10 | Defines unit of measure used for the MWP on the data plate. If no code is chosen, MWP will be expressed in MPa. |
| 11 | If no code is chosen, the transmitter will have the Standard Ouput Signal with Up-scale failure alarm. |
| 12 | Applicable for Wetted Parts Material code S. |
| 13 | This option is included in Agency Apporval code /V1U. |
| 14 | Refer to the "Ordering Information" section of the noted GS. |
| 15 | Applicable for Measurement Span code D. |
| 16 | The unit of measure on the certificate is always kPa / MPa regardless of the selection of /D1, /D3, or /D4. |
| 17 | Order as a separate line item. |
| 18 | IMs are also avialable free of charge on our website: www.yokogawa.com |
| 19 | Percentage of YCA List Price. Only valid on transmitters that stay within YCA's service area. |
| 20 | Limited to 16 Characters Maximum. Must be special ordered if more digits are required. |
| 21 | Not applicable for electrical connection codes 0, 2, and 4. |
Add Item to Quote
Please select atleast one item to proceed.
Configuration Error
Selected configuration is not valid. Please read notes and make corrections.
Loading...