YCA Store | Products | Transmitters | Gauge Pressure | Model EJX530A

#	Model/Spec/Part No.	Description	CF	Pref		Notes

(Multiple selections allowed, creates separate lines on the quote.)

Bracket Kits (Separate Line Item)
	F9900SJ	2-inch pipe mounting bracket kit (316 SST)

Your Product

Gauge Pressure | Model EJX530A

F9900SJ

View Cart

**General Notes**
Title	Description
How to Order	The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted. Refer to the "Ordering Information" section of the GS noted.
How to build MS Code	One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear.

**Product Notes**
Note Id	Description
1	Select for 3rd party seal attachment.
2	Not applicable for Output Signal code -F.
3	Not applicable for Electrical Connection code 0, 5, 7, 9 or A.
4	Applicable for Electrical Connection code 2, 4, 7, 9, C, and D.
5	Not applicable for option code /AL.
6	Not applicable for Output Signal code -F.
7	See the "Ordering Information" section of the appropiate GS.
8	Applicable Wetted Parts Material code S.
9	Not applicable with Amplifier Housing code 2.
10	Consult Factory for the correct use of this option. Applicable to Measuremnet Span code D. If compliance with Category III is needed, specify this option code.
11	316 or 316L SS. This specification is included in Amplifer Housing code 2.
12	Limited to 16 Characters Maximum. Must be special ordered if more digits are required.
13	Note not used.
14	Applicable for Electrical Connection code 2, 4, 7, 9, C, and D.
15	Applicable for Output Signal code -F.
16	Tokuchu approval is required before an order for this option can be accepted.
17	Note not used.
18	Note not used.
19	Not applicable for combination of Measurement Span code D and Wetted Parts Material code H.
20	Material of a blind plug is aluminum alloy or 304 SST.
21	Defines unit of measure used for the MWP on the data plate. If no code is selected, MWP will be expressed in MPa.
22	Note applicable for Option code /FF1.
23	Not applicable for Amplifier Housing code 2
24	Not applicable for electrical connection codes 0, 2, and 4.
25	Applicable for capsule code B.