Loading...| # | Model/Spec/Part No. | Description | CF | Pref | Notes |
|---|
Category
Transmitters
Subgroup | Page
Multi-Variable | EJX930A
DOCIM01C25R0301EN
Configuration
Parts/Accessories (separate line)
Notes
| Note Id | Description |
|---|---|
| 1 | Applicable for External Temperature Input code 0. |
| 2 | Not applicable for Amplifier Housing code 2. Material of plug is aluminum alloy or 304 SST. |
| 3 | RTD is not provided |
| 4 | Specifiy when using conduit for RTD connection. |
| 5 | Not applicable for Amplifier Housing code 2. |
| 6 | Applicable for External Temperature Input code -B, -C, and -D. |
| 7 | Applicable for External Temperature Input code -1, -2, -3, and -4. |
| 8 | Not appllicable for Output Signal code F. Tokuchu required to purchase this option. Contact PMK before quoting. |
| 9 | The option is included in Amplifier Housing code 2. |
| 10 | The unit of measure that the MWP is expressed in on the Datad Plate. |
| 11 | Applicable for Installation code -7. Material of vent is 316 SST. |
| 12 | Applicable for Output Signal code -E. |
| 13 | Applicable for Installation code -9 and Mounting Bracket code N. |
| 14 | Applicable to Output Signal code -F. |
| 15 | Contact PMK for the propoer application of this option. |
| 16 | Not applicable with Multi Sensing Measurement Function code A, if not selected with Mass Flow Measurement Function code B, then must have configuration software (see FSA120). |
| 17 | Order as a separate line item |
| 18 | Percentage of Yokogawa America List Price. Warranty only valid on transmitters that stay within the Yokogawa America service area. Order as a separate line item. |
| 19 | A Hardware and communication manual is included with each transmitter. These are additional manuals. Order as a separate line item |
| 20 | Applicable for Measurement Function code A. |
| 21 | /A Lightning Protector must be selected. |
| 22 | For HART protocol type |
| 23 | For HART protocol type; The change of pressure fluctuation is monitored and then detects the impulse line blockage. Refer to TI 01C25A31-01E for detailed technical information required for using this function. |
| 24 | For FOUNDATION Fieldbus protocol type; This option code must be specified with option code EE; The change of pressure fluctuation is monitored and then detects the impulse line blockage. Refer to TI 01C25A31-01E for detailed technical information required for using this function. |
| 25 | Limited to 16 Characters Maximum. Must be special ordered if more digits are required. |
| 26 | General Note for all DPHARP transmitters: Z911 document not available for GS11, GS12, GS16, GU11, GU12, JS4, JS5, J12, PS21,PF23, PF22, NS25, NS21, NS24, NF21, UF1, US1, US24 |
| 27 | Applicable for process connection 5. |
| 28 | Applicable for process connection 3 and 4. |
| 29 | Applicable for option code UN and N1. |
| 30 | Not applicable for plug option code UN. |
| 31 | Not applicable for option code N1, N2, and N3. |
| 32 | Applicable for Wetted parts material code S. |
| 33 | Not applicable for electrical connection codes 0, 2, and 4. |
| 34 | See 'Ordering Information' in GS. |
Add Item to Quote
Please select atleast one item to proceed.
Configuration Error
Selected configuration is not valid. Please read notes and make corrections.