Loading...| # | Model/Spec/Part No. | Description | CF | Pref | Notes |
|---|
Category
Transmitters
Subgroup | Page
Multi-Variable | EJX910A
DOCIM01C25A0101EN
Configuration
Parts/Accessories (separate line)
Notes
| Note Id | Description |
|---|---|
| 1 | For External Temperature Input code 0 (Fixed Temperature). |
| 2 | Not applicable for Amplifier Housing code 2. |
| 3 | Not avialable for Approval Codes code /FS15. |
| 4 | RTD not provided. |
| 5 | Preset external temperature value is used for density compensation. |
| 6 | Tokuchu Approval is required to purchase this option. Contact PMK before quoting. Tokuchu must be approved BEFORE the order is place. |
| 7 | Applicable for Electrical Connection code 2, 4, 7, and 9. |
| 8 | Applicable for External Temperature Input code -0, -B, -C, and -D. |
| 9 | Applicable for External Temperature Input code -0, -1, -2, -3, and -4. |
| 10 | Applicable for Process Connection code 3, 4, and 5; Installation code 9; Mounting Bracket code N. |
| 11 | Applicable for Installation code 7. |
| 12 | This option code includes in Amplifier Housing code 2. |
| 13 | Consult factory for correct use of this option. Applicable to Measurement Span (Capsule) code M and H. |
| 14 | Applicable to Output Signal code -E. |
| 15 | Applicable to Output Signal code -F. |
| 16 | Order as a separate line item. |
| 17 | Not applicable with Multi Sensing Measurement Function code A, if not selected with Mass Flow Measurement Function code B, then must have configuration software (see FSA120) |
| 18 | Percentage of YCA List Price. Warranty only valid within YCA service area. |
| 19 | Defines the unit of measure used for the MWP on the data plate. If no code is selected, MWP will be expressed in MPa. |
| 20 | Applicable to Installation code -7 and Wetted Parts Material code S. |
| 21 | Applicable for Measurement Function code A. |
| 22 | /A Lightning Protector must be selected. |
| 23 | For HART protocol type; The change of pressure fluctuation is monitored and then detects the impulse line blockage. Refer to TI 01C25A31-01E for detailed technical information required for using this function. |
| 24 | For FOUNDATION Fieldbus protocol type; This option code must be specified with option code EE; The change of pressure fluctuation is monitored and then detects the impulse line blockage. Refer to TI 01C25A31-01E for detailed technical information required for using this function. |
| 25 | Limited to 16 Characters Maximum. Must be special ordered if more digits are required. |
| 26 | General Note for all DPHARP transmitters: Z911 document not available for GS11, GS12, GS16, GU11, GU12, JS4, JS5, J12, PS21,PF23, PF22, NS25, NS21, NS24, NF21, UF1, US1, US24 |
| 27 | Only available for process connection codes 0 and 5. |
| 28 | Only Available for process connection codes 1,2, 3, and 4. |
| 29 | Only A |
| 30 | Only available for process connection codes 0 or 5. |
| 31 | Only available for process connection codes 1,2, 3, or 4. |
| 32 | Only available for opt |
| 33 | Applicable for process connection codes 0 and 5. |
| 34 | Applicable for process connection codes 1,2, 3, and 4. |
| 35 | Applicable for option codes UN and N1. |
| 36 | Not applicable for plug option code UN. |
| 37 | Not applicable for option code N1, N2, and N3. |
| 38 | Programming fee cannot be discounted, it is seen as a document. |
| 39 | Applicable for Wetted parts material code S. |
| 40 | See ‘Ordering Information’ in GS. |
| 41 | Not applicable for electrical connection codes 0, 2, and 4. |
Add Item to Quote
Please select atleast one item to proceed.
Configuration Error
Selected configuration is not valid. Please read notes and make corrections.