YCA Store | Products | High Frequency Instruments | High-Speed Data Acquisition | SL1000 - Probes and Accessories

#	Model/Spec/Part No.	Description	CF	Pref		Notes

Parts / Accessories

(Multiple selections allowed, creates separate lines on the quote.)

Input Modules Accessories
	438920	Shunt Resistor, 250Ω ±0.1%, for clamped input Terminal
	438921	Shunt Resistor, 100Ω ±0.1%, for clamped input Terminal
	438922	Shunt Resistor, 10Ω ±0.1%, for clamped input Terminal
	700940	Cable, MIL-C-26482-to-NDIS Conversion Cable, 1.5m (DL708)
	701955	Bridge Head, NDIS 120-ohm, includes 5m Cable
	701956	Bridge Head, NDIS 350-ohm, includes 5m Cable
	701957	Bridge Head, DSUB 120-ohm, includes 5m Cable
	701958	Bridge Head, DSUB 350-ohm, includes 5m Cable
	A1002JC	NDIS connector
Passive Voltage Probes
	700929	Passive Probe, 1000Vp CAT2, 100MHz, 10:1, 10MΩ, 1.5m, 'Isolated Probe'
	701940	Passive Probe, 600Vp, 6MHz/10MHz, 1:1, 10:1, 1MΩ/10MΩ, 1.5m '600V Non-Isolated'
	702902	Passive Probe, 1000Vp CAT2, 10:1, 10MΩ, 2.5m, ‘Isolated Probe’, Operates over temperature range of -40° to +85° C.
Passive Voltage Probe Accessories
	701948	Extension Clip, Plug-on pair for 700929/701947, 1000Vp CAT2, 0.26m/0.3m/0.4m
	B8023ZC	Lead, plug-on, safety, low-side lead replacement for new-style 700929
	B8099NL	702902 / 702906 4mm Conversion Adapter, Pincher tip end
	B8099NM	702902 / 702906 4mm Conversion Adapter, Ground lead end
	B9940WX	Clip, plug-on, safety, replacment part for new-style 700929
	M1223WN-A	Push-on large jaw safety clip for 700929 (H side, probe tip)
	M1223WP-A	Push-on safety male banana plug for 700929 (H side, probe tip)
	M1223WQ-A	Large jaw safety reference clip for 700929 (L side)
	M1223WR-A	Large jaw reference lead safety adapter to be used with M1223WQ-A, for the 700929 isolation probe
Differential Voltage Probes
	701925	PBDH0500 Differential Probe
	701977	Differential Probe
	701978	Differential Probe
Differential Voltage Probe Accessories
	700938-3-D	Active Probe Power Supply - 2 LEMO output jacks
	701934-D	Probe Power Supply
	B9852MF	701922 Pincher tip replacement black
	B9852MG	701922 Pincher tip replacement red
	B9852MM	700924 Pincher tip replacement black
	B9852MN	700924 Pincher tip replacement red
	B9852SZ	Accessory Kit - complete - for 701920 Diff Probe
Current Probes
	701917	Current Probe, 5Arms, DC-50MHz., 1%/3%, 1A:1V, 1.5m, 5mm max dia.
	701918	Current Probe, 5Arms, DC-120MHz., 1%/3%, 1A:1V, 1.5m, 5mm max dia.
	701930	Current Probe, 150Arms, DC-10MHz, 1%/2%, 100A:1V, 1.0m, 20mm max cond. Dia.
	701931	Current Probe, 500Arms, DC-2MHz, 1%/2%, 100:A:1V,1.0m, 20mm max cond. Dia.
	701932	Current Probe, 30Arms, DC-100MHz, 1%/2%, 10A:1V, 1.0m, 5mm max cond. Dia.
	701933	Current Probe, 30Arms, DC-50MHz, 1%/2%, 10A:1V, 1.5m, 5mm max cond. Dia.
	702915	Current probe
	702916	Current probe
	96001	AC Current Clamp, 400 A, 10 mV/A, 20 Hz - 20 KHz, 1%
	B9017SA	Clamp-on CT; 12/120/1200Arms (2000Apk),100mV/A, 10mV/A, 1mV/A, (AEMC SR661) 100KHz, 3%, 2%,1%
	B9017TR	10 A/100 A Pk AC/DC, 100/10 mV/A (AEMC SL261)
	B9017ZR	Clamp-on CT 1000A. 1mV/A (AEMC SR651) 5KHz, 0.5%
Current Probe Accessories
	M1114AQ-A	Adapter, BNC-isolated-male w/ Dual safety-banana-jack-female, 500V CAT1, 150V CAT2, industrial grade
Other Accessories
	720901-01	Cable, Synchronous SL1000, 1m
	720901-02	Cable, Synchronous SL1000, 3m
	751541-E4	Rack Mount Kit, EIA for SL1000
	751541-J4	Rack Mount Kit, JIS for SL1000
	B9946EB	Soft case for probes and accessories
	DOCIM72012001EN	SL1000 Instruction Manual
Cables, Adapters, Connectors
	366921	BNC to Binding Post Adapter
	366922	Adapter, non-isolated, BNC-female w/ Dual banana-plug-male, 42Vp
	366923	Adapter, non-isolated, BNC-Tee, BNC-male with two BNC-females, 42Vp
	366924	Cable, non-isolated BNC Cable, 1m
	366925	Cable, non-isolated BNC Cable, 2m
	366926	Test Lead, non-isolated, 1:1 BNC-male w/ alligator-clip pair, 42Vp, 3ft
	366961	Test Lead, non-isolated, 1:1 Dual Banana Plug w/ alligator-clip pair, 42Vp, 1.2m
	700976	Terminator, 50Ω feed-thru
	701901	BNC to Safety Adapter Lead, 1000 V
	701902	Safety BNC to BNC Cable 1 Meter
	701903	Safety BNC to BNC Cable 2 Meter
	701906	Clips, Long Test Clip pair w/ safety-banana-jack, red/black, 1000Vrms CAT3, 0.3m, for use with 701901/758917/M1114CH
	701954	Clips, Large Dolphin Clip pair w/ safety-banana-jack, red/black, 1000Vrms CAT2, for use with 701901/758917/M1114CH
	720911	Ext I/O Cable, RJ-11 w/ tinned-ends, 1.5 Meter
	751512	Banana Male-to-Binding Post Adapter
	758917	Lead Set, 30 inch, with Safety Banana Plugs
	758921	Banana Plug to Spade Lug Conversion Adapter
	758922	Alligator Clip Adapter Set Rated 300V
	758924	Banana Jack to Safety BNC Conversion Adapter
	758929	Alligator Clip Adapter Set Rated 1000V

Your Product

Subgroup | Page

High-Speed Data Acquisition | SL1000 - Probes and Accessories

Part

702915

Configuration

Parts/Accessories (separate line)

View Cart

Note Id	Description
1	Also used with 700987
2	Also used with 701954, 758929, 758921, 758922
3	Banana plug output, use B9017QP for Banana-BNC conversion cable
4	Banana plug output, use M1114AQ-A for Banana-BNC conversion cable
5	Requires /P4 option or 701934 Probe Power Supply
6	Combines with 758922/758929/701954 when voltage greater than >42V
7	Combines with 758922/758929/701954 when voltage less than <42V
8	For use with 701901/758917

Product Categories

Parts / Accessories

Input Modules Accessories

Passive Voltage Probes

Passive Voltage Probe Accessories

Differential Voltage Probes

Differential Voltage Probe Accessories

Current Probes

Current Probe Accessories

Other Accessories

Cables, Adapters, Connectors

Category

Subgroup | Page

Part

Configuration

Parts/Accessories (separate line)