YCA Store | Products | FA-M3 PLC | Advanced Control Products

#	Model/Spec/Part No.	Description	CF	Pref		Notes

Parts / Accessories

(Multiple selections allowed, creates separate lines on the quote.)

Base Modules
	F3BU04-0N/D1	Power supply (F3PU10/16) slot and 4 slots for CPU and I/O with rail mount kit (1 set)	1
	F3BU05-0D/D1	Base Module(5slots), power supply module, 1 rail mount kit set
	F3BU06-0N/D1	Power supply (F3PU10/16) slot and 6 slots for CPU and I/O with rail mount kit (1 set)	1
	F3BU09-0N/D2	Power supply (F3PU20/26) slot and 9 slots for CPU and I/O with rail mount kit (2 sets)	1
	F3BU13-0N/D2	Power supply (F3PU20/26) slot and 13 slots for CPU and I/O with rail mount kit (2 sets)	1
	F3BU16-0N	For Power supply (F3PU20/F3PU30/FBU26/FPU36) + 16 slots (CPU+I/O)	2
Power Supply Modules
	F3PU10-0S	100 - 240V AC, 5 VDC / 2 A rated output (for 4 and 6 slots, M4 screws)	14
	F3PU16-0S	24V DC, 5V DC / 2.0A rated output (for 5, 9, 13 and 16 slots, M4 screws)
	F3PU20-0S	100 to 240V AC, 5V DC/4.3 A rated output (for 5, 9, 13 and 16 slots, M4 screws)	14
	F3PU26-0S	24V DC, 5V DC / 4.3A rated output (for 5, 9, 13 and 16 slots, M4 screws)
	F3PU30-0S	100 to 240V AC, 5V DC/ 6.0A rated output (for 5, 9, 13, and 16 slots, M4 screws)	14
	F3PU36-0S	24V DC, 5V DC / 6.0A rated output (for 5, 9, 13, and 16 slots, M4 screws)	14
CPU port/D-sub 9-pin adapter cable
	KM10-0C	D-sub 9-pin, female, cable length approx. 0.5m (for F3SP22-05)
	KM21-2B	Cable, CPU port to D-sub 9 pins, female, 3m long
Cable for programming tools
	KM11-2T*A	DOS/V, IBM-PC/AT compatible, cable length approx. 3m
	KM13-1S	USB 1.1 compliant USB-serial converter, cable length approx. 3m	19
Sequence CPU module
	F3SP22-0S	Ladder 10K steps, execute basic instructions in 0.045μs, with memory	31
	F3SP71-4S	Ladder 60K steps, executes basic instructions in 0.00375 μs, SD card slot, 100Base Ethernet	31
	F3SP76-7S	Ladder 260K steps, executes basic instructions in 0.00375 μs, SD card slot, 100Base Ethernet	31
OS-Free CPU Module
	F3RP70-2L	CPU module with boot loader. Industrial AI platform for application development using Python. Ethernet:10BASE-T / 100BASE-TX / 1000BASE-T（2ch). RS-232C：9.6kbps～115.2kbps dedicated connector. Storage : SDHC memory card (2slot) PCI : For utility module (32bit) : ROM - 256MB : RAM - 1GB : SRAM - 8MB.
	KM72-2N	RS232C Converter cable for F3RP70 - D-sub 9 pins, male, 0.5m long
	SFRD14-MDW	Ubuntu image for F3RP70 to boot the Linux OS by installing it onto the bootable SD card.
	SFRL18-MPC	AI control learning service for F3RP70 - The AI control learns and controls the relationship between the equipment inputs, the surrounding environment, and the control outputs. The learning service generates a cloud-based model of the environment.	46
	SFRL19-MPC	AI control license for F3RP70 - The AI Control License embeds an authentication key in control models generated by the AI control learning service. One license is required per CPU module.	46
	SFRM19-MDW	AI control software package for F3RP70. Required to create and use AI control applications that run on Ubuntu images for OS-Free CPU module.	46
Input module
	F3XA08-1N	100 to 120 V AC input, 8 points
	F3XA08-2N	200 to 240 V AC input, 8 points
	F3XA16-1N	100 to 120 V AC input, 16 points
	F3XC08-0C	No-voltage contact input, 8 points, separate commons
	F3XC08-0N	No-voltage contact input, 8 points
	F3XD08-6F	DC input 12-24V DC, 8 points (sink/source)	4
	F3XD16-3F	DC input 24V DC, 16 points (sink/source)	4
	F3XD16-3H	DC input, positive common, 24V DC, 16 points (high-speed input)	5
	F3XD16-4F	DC input 12V DC, 16 points (sink/source)	4
	F3XD32-3F/K1	DC input 24V DC, 32 points (sink/source)	5
	F3XD32-4F/K1	DC input 12V DC, 32 points (sink/source)	4
	F3XD32-5F/K1	TTL input, 5 V DC, 32 points	4
	F3XD64-3F/K2	DC input 24V DC, 64 points (sink/source)	4
	F3XD64-4F/K2	DC input 12V DC, 64 points (sink/source)	4
	F3XD64-6M/K1	DC input, 12-24V DC, 64 points (8X8 matrix)
	F3XH04-3N	High-speed input with pulse catch function, 24V DC, 4 points
Output module
	F3YA08-2N	Triac output (100 to 240V AC), 1A , 8 points
	F3YC08-0C	Relay output (24V DC, 100 to 240V AC) 2A, isolated commons, 8 points
	F3YC08-0N	Relay output (5 to 24V DC, 100 to 240V AC) 2A, 8 points
	F3YC16-0N	Relay output (24 V DC, 100 to 240 V AC), 2A, 16 points
	F3YD04-7N	TR output, 24V DC, 2A, isolated commons, 4 points
	F3YD08-6A	TR sink output, 12 to 24V DC, 1A, 8 points
	F3YD08-6B	TR source output, 12 to 24V DC, 1A, 8 points
	F3YD08-7A	TR source output, 12 to 24V DC, 2A, 8 points
	F3YD14-5A	TR sink output, 12 to 24V DC, 0.5A, 14 points
	F3YD14-5B	TR source output, 12 to 24V DC, 0.5A, 14 points
	F3YD32-1H/K1	High Speed TR sink output, 12 to 24V DC, 0.1A, 32 points with output short-circuit protection
	F3YD32-1P/K1	TR sink output, 12 to 24V DC, 0.1A, 32 points with output short-circuit protection
	F3YD32-1R/K1	TR source output, 12 to 24V DC, 0.1A, 32 points with output short-circuit protection
	F3YD32-1T/K1	TTL output, 5 V DC, 16 mA, 32 points
	F3YD64-1M/K1	TR output, matrix scan, 12 to 24V DC, 64 points (8X8)
	F3YD64-1P/K2	TR sink output, 24V DC, 0.1A, 64 points with output short-circuit protection
	F3YD64-1R/K2	TR source output, 24V DC, 0.1A, 64 points with output short-circuit protection
Input/output module
	F3WD64-3P	DC Input, TR sink output, 0.1A, 24V DC, 32 points each, with output short-circuit protection
	F3WD64-4P	DC Input, TR sink output, 0.1A, 12V DC, 32 points each, with output short-circuit protection
Analog input/output module
	F3AD04-5R	0 to 5 VDC, 1 to 5 VDC, -10 to 10V DC, 0 to 10V DC, Input 4 points, 16 bit A/D, Sampling period 50μs
	F3AD04-5V	0 to 5 VDC, 1 to 5 VDC, -10 to 10V DC, 0 to 10V DC, Input 4 points, 12 bit A/D, Sampling period 1mS
	F3AD08-4R	0 to 20 mA, 4 to 20 mA, Input 8 points, 16 bit high-res. ADC, Sampling at 50μs/point
	F3AD08-4W	0 to 20 mA, 4 to 20 mA, Input 8 points, 12 bit A/D, Sampling period 1mS
	F3AD08-5R	0 to 5V DC, 1 to 5V DC, -10 to 10V DC, 0 to 10V DC, Input 8 points, 16 bit A/D, Sampling period 50μs
	F3AD08-5V	0 to 5V DC, 1 to 5V DC, -10 to 10V DC, 0 to 10V DC, Input 8 points, 12 bit A/D, Sampling period 1mS
	F3AD08-6R	0 to 5V DC, 1 to 5V DC, -10 to 10V DC, 0 to 20 mA, 4 to 20 mA input, 8 points, 16 bit high-res. ADC, Sampling at 50μs/point
	F3DA04-6R	0 to 5V DC, 1 to 5V DC, -10 to 10V DC, 0 to 20 mA, 4 to 20 mA input, 4 points, 16 bit high-res. ADC, Sampling at 50μs/point
	F3DA08-5R	0 to 5V DC, 1 to 5V DC, -10 to 10V DC, 0 to 20 mA, 4 to 20 mA input, 8 points, 16 bit high-res. ADC, Sampling at 50μs/point
Temperature/PID Control Module
	F3CU04-0H	4 LOOP PID CONTROL	22,23
	F3CU04-0H/DF	4 Loop PID Control with Fahrenheit Display Function	22,23
	F3CU04-1H	4 LOOP PID CONTROL With 4-20mA OUTPUT	22,23
	F3CU04-1H/DF	4 Loop PID Control with 4-20mA Output and Fahrenheit Display Function	22,23
Temperature Monitoring Module
	F3CX04-0H	TEMPERATURE MONITOR
	F3CX04-0H/DF	Temperature Monitor with Fahrenheit Display Function
Personal computer link module
	F3LC11-1F	115kbps max, RS-232-C port x 1, with modem interface function
	F3LC11-2F	115kbps max, RS-422/RS-485 port x 1
	F3LC12-1F	115kbps max, RS-232-C port x 2, with modem interface function
DeviceNet Module
	F3LD01-0N	500kbps max. DeviceNet port x 1, with master/scanner function
	F3LD21-0N	CAN2.0B Interface Module
Ethernet interface module
	F3LE01-1T	10 Mbps max., 10 BASE-T, with higher-level link and event transmission functions
	F3LE11-1T	10/100 Mbps max., 10 BASE-T/100 BASE-T, with E-Mail function
	F3LE12-1T	10/100 Mbps 10BASE-T/100BASE-TX with (UDP/IP) messaging function
	F3LN01-0N	10/100Mbps, 10-Base-T/100-Base-TX, with higher-level link, (UDP/IP) messaging function
FL-net Interface Module
	F3LX02-2N	10/100Mbps, 10 Base T/100 BASE-TX, FL-net (OPCN-2) protocol Ver2.00
NX Interface Module
	F3NX01-0N	10/100Mbps, 10-Base-T/100-Base-TX, with Autonomous Distribution protocol (trademark of Hitachi, Ltd)
GP-IB communication module
	F3GB01-0N	GP-IB communication module, GP-IB port x 1
Ladder Communication module
	F3RZ81-0F	115kbps max, RS-323C port x 1
	F3RZ82-0F	115kbps max, RS-323C port x 2
	F3RZ91-0F	115 kbps max, 1 RS-422/RS-485 port x 1
FA-Link H module
	F3LP02-0N	32 stations max., total transmission distance 1km, 1.25Mbps max.	8
Fiber-optic FA-Link H module
	F3LP12-0N	32 stations max., 10 km total cable length, 1.25 Mbps transmission speed	8,26
Fiber-optic FA-Bus module
	F3LR01-0N	7 stations max., total transmission distance 200 m, 10 Mbps transmission speed
Fiber-optic FA-Bus 2 module
	F3LR02-0N	32 stations max., total transmission length 1.4 km, max. distance between stations 500m, 10 Mbps max.	9
Modbus Interface Module
	F3LC31-2F	Modbus RTU/ASCII, 115kbps max, 1 port
FA Bus Type 2 Module
	F3LR02-1W	7 station max., max transmission distance: 70m for daisy-chain configuration and 80 m for loop configuration, max. distance between stations 10m, 10Mbps max. wired	9
High-speed counter module
	F3XP01-0H/K1	Up/Down counter, phase difference, pulse + direction, addition/subtraction, 400kpps (for x4), 32 bit channel x 1
	F3XP02-0H/K2	Up/Down counter, phase difference, pulse + direction, addition/subtraction, 400kpps (for x4), 32 bit channel x 2
Pulse input module
	F3XS04-3N	Ring-up counter, 0 to 20 kHz, 24 V DC input, 16-bit channel x 4
	F3XS04-4N	Ring-up counter, 0 to 20 kHz, 12 V DC input, 16-bit channel x 4
Positioning module (with pulse output)
	F3NC32-0N	2-axis control, 5 Mpps max., pulse output, PTP and linear/circular interpolation, direct/pattern operation, counter for ABS encoder input (2ch)
	F3NC34-0N	4-axis control, 5 Mpps max., pulse output, PTP and linear/circular interpolation, direct/pattern operation, counter for ABS encoder input (4ch)
Positioning module (with analog voltage output)
	F3NC51-0N/K1	1-axis control with speed reference voltage output type
	F3NC52-0N/K2	2-axis control with speed reference voltage output type
Positioning Module with MECHATROLINK - II Interface
	F3NC96-0N	15-axes, 10 Mbps transmission rate, RS-485 two-wire MECHATROLINK-II Interface, 1ms cycle time- 8 axes, 2.0ms cycle time - 15 axes, 50m max. transmission distance
Positioning Module with MECHATROLINK - III Interface
	F3NC97-0N	15-axes, 100 Mbps transmission rate, Ethernet MECHATROLINK-III Interface, 0.25ms cycle time- 4 axes, 0.5ms cycle time - 8 axes, 1.0ms cycle time - 16 axes, 100m max. between stations
High-speed Data Acquistion Module
	F3HA06-1R	High-speed Data Acquisition Module, -10to10V,0to10V,1to5V
	F3HA08-0N	High-speed Data Acquisition Module, 0-5VDC/-10-10VDC input,8 points (4 point simultaneous input),Trigger input 24vdc, One point
	F3HA12-1R	High-speed Data Acquisition Module, -10to10V,0to10V,1to5V
Blank Module
	F3BL00-0N	Blank module, for empty I/O slots
Fiber-optic code (for connection inside panel) (DCV-HC-20/07HC-20/07) (for F3LR02, LP12)
	KM60-001	For use inside panel, cable length approx. 1.0m
	KM60-003	For use inside panel, cable length approx. 3.0m
	KM60-S06	For use inside panel, cable length approx. 0.6m
Terminal block unit
	TA40-0N	Converts a 40-point input/output connector to accommodate to an European type terminal block
Connector Terminal block
	TA50-0N	Connector terminal block (40 points), M3.5 screws	12,13
	TA50-2N	Connector terminal block (40 points), M3 screws	12,13
YHLS Master Module
	F3LH01-1N	12 Mbps max., YHLS Port x 1
	F3LH02-1N	10/100Mbps, 10-Base-T/100-Base-TX, EtherNet/IP scanner/adapter
YHLS Slave Unit - Input-Output Modules
	TAHWD32-3NBM	16 DC inputs (positive common), 24V DC, MIL, 16 TR outputs (source-type, with short-circuit protection), 24V DC 0.1 A, MIL
	TAHWD32-3PAM	16 DC inputs (positive common), 24V DC, MIL, 16 TR outputs (sink-type, with short-circuit protection), 24V DC 0.1 A, MIL
YHLS Slave Unit - Input Modules
	TAHXD16-3NEM	16 Inputs (Negative Common), 24VDC, MIL
	TAHXD16-3PEM	16 Inputs (Positive Common), 24VDC, MIL
YHLS Slave Unit - Output Modules
	TAHYD16-3EAM	16 TR Outputs (Sink type, with short circuit protection), 24VDC, 0.1A, MIL
	TAHYD16-3EBM	16 TR Outputs (Source type, with short circuit protection), 24VDC, 0.1A, MIL
YHLS Fixed Cable
	KM80-010	Flame-retardant cable (equivalent of VW-1), YHLS fixed, 10m	35
	KM80-050	Flame-retardant cable (equivalent of VW-1), YHLS fixed, 50m	36,37
	KM80-100	Flame-retardant cable (equivalent of VW-1), YHLS fixed, 100m	36,37
	KM80-200	Flame-retardant cable (equivalent of VW-1), YHLS fixed, 200m	36,37
YHLS Flexible Cable
	KM81-010	Flame-retardant cable (equivalent of VW-1), YHLS flexible, 10m	36,37
	KM81-050	Flame-retardant cable (equivalent of VW-1), YHLS flexible, 50m	36,37
	KM81-100	Flame-retardant cable (equivalent of VW-1), YHLS flexible, 100m	36,37
	KM81-200	Flame-retardant cable (equivalent of VW-1), YHLS flexible, 200m	36,37
Software Packages
	SF630-MCW	FA-M3 Programming Tool WideField3 R2 or later for Windows, 7/8/8.1/10 (x86/x64) compatible, multi-lingual version, LiveLogicAnalyzer function(F3SP71-4S/F3SP76-7S only) . Provided by CD-ROM
	SF631-MCW	Packaged product comprised of FA-M3 Programming Tool Wideview3 (SF630-MCW) and FA-M3 Simulation Software Virtual-M3 (SF681-MDW)
	SF661-MCW	FA-M3 ToolBox for Temperature Control and Monitoring Modules, Windows 7/8/8.1/10 (x86/x64) compatible, multi-lingual version, (for F3CU04 and F3CX004) Provided by CD-ROM
	SF662-MCW	FA-M3 ToolBox for Positioning Modules, Windows 7/8/8.1/10 (x86/x64) compatible, multi-lingual version, (for F3NC3X) Provided by CD-ROM
	SF663-MCW	Toolbox for Positioning Modules, Windows 7/8/8.1/10 (x86/x64) compatible, multi-lingual version, (for F3YP2X), CD-ROM
	SF681-MDW	FA-M3 Simulation Software Virtual-M3, Windows 7/8/8.1/10 (x86/x64) compatible, multi-lingual version, Provided by Web download
	SF900	OPC Server Software with Hardware Key
Terminal Block Connector Cable
	KM55-005	Cable between module and terminal block, length 0.5m	39
	KM55-010	Cable between module and terminal block, length 1.0m	39
	KM55-015	Cable between module and terminal block, length 1.5m	39
	KM55-020	Cable between module and terminal block, length 2.0m	39
	KM55-025	Cable between module and terminal block, length 2.5m	39
	KM55-030	Cable between module and terminal block, length 3.0m	39
Fiber-optic cable for indoor connection (2-C-V HC-20/07)(for F3LR01, F3LR02, F3LP12)
	KM61-010	Fiber optic cable for FA-bus (indoor use), 10m	38
	KM61-100	Fiber optic cable for FA-bus (indoor use), 100m	38
Fiber-optic cable for indoor connection (2-C-V HC-20/07) (for F3LR01, F3LR02, F3LP12)
	KM65-001	Cable for indoor extended specifications, 1m long	40
	KM65-003	Cable for indoor extended specifications, 3m long	40
	KM65-005	Cable for indoor extended specifications, 5m long	40
	KM65-010	Cable for indoor extended specifications, 10m long	40
	KM65-020	Cable for indoor extended specifications, 20m long	40

Your Product

Subgroup | Page

Advanced Control Products | RANGE-FREE MULTI-CONTROLLER

Model

Configuration

Parts/Accessories (separate line)

View Cart

**Product Notes**
Note Id	Description
1	Each rail mount kit is composed of three pieces.
2	Cannot be used together with a rail mount kit.
3	Takes one month (30 working days) for manufacturing lead-time.
4	Input response time 100 µs possible by configuration with F3SP28, F3SP38, F3SP53, F3SP58 and F3SP59.
5	Input response time 10 µs possible by configuration with F3SP28, F3SP38, F3SP53, F3SP58 and F3SP59.
6	A connector set is composed of a 40-pin connector and connector cover.
7	With output shut-off function for F3SP28, F3SP38, F3SP53, F3SP58, F3SP59, F3SP66 and F3SP67.
8	To use the F3LP02-0N or F3LP12-0N,-The sequence CPU module (F3SP21, F3SP25 or F3SP35) must be Revision 8 or later; and -The ladder diagram support program M3 must be Revision 1.08 or later.
9	To use the F3LR02-0N or F3LR02-1W, -The sequence CPU module (F3SP21, F3SP25 or F3SP35) must be Revision 8 or later; -The base module (F3BU04 or F3BU06) must be Revision 1 or later; and -The ladder diagram support program M3 must be Revision 1.08 or later.
10	A connector set is composed of a 48-pin connector and connector cover.
12	Takes 10 working days manufacturing lead-time.
13	Cannot be used with F3YP04, F3YP08, F3YP14, F3YP18, F3YP32, or F3YP34
14	F3PUxx-0N and F3PUxx-0S have the same dimensions, internal circuitry and other characteristics, except that F3PUxx-0N uses M3.5-screw terminals while F3PUxx-0S uses M4-screw terminals.
15	Order entry stop from Nov. 30, 2005
16	Order entry stop from June 30, 2006
17	Order entry stop from Sep. 30, 2007
18	Order entry stop from Nov. 17, 2006
19	Driver software is different from KM13-1N.
20	Compatible with the following versions of software. - FA-M3 Programming Tool Widefield2 R4.01 or later - FA-M3 ToolBox for temperature Control and Monitoring Modules R4.01 or later - FA-M3 ToolBox for Positioning Modules R2.01 or later
21	Order entry stop from Feb. 26, 2008
22	To use the F3CU04-0S, F3CU04-1S - ToolBox Temperature Control and PID Module must be revision 4.02 or later.
23	The specifications are the same as F3CU04-xN, new model is improved the limitation of current output. When parameters are changed and necessary to be saved with F3CU04-xN, application program to save the parameters are required.
24	Order entry stop on Sep. 30, 2008
25	Order entry stop on Jan. 24, 2009
26	The price was changed from Nov. 1, 2007
27	Order entry stop on Sep.30, 2009
28	Order entry stop on May 19, 2009
29	Order entry stop on Dec. 22, 2010
30	Compatible with the following versions of software - FA-M3 Programming Tool Widefield2 R5.03 or later - FA-M3 ToolBox for temperature Control and Monitoring Modules R4.03 or later - FA-M3 ToolBox for Positioning Modules R2.03 or later
31	Compatible with the following versions of software - FA-M3 Programming Tool WideField3 R1.01 or later - FA-M3 ToolBox for temperature Control and Monitoring Modules R5.01 or later - FA-M3 ToolBox for Positioning Modules R3.01 or later
32	Order entry stop from Sept. 30, 2012
33	Order entry stop from Jul. 27, 2013
34	Order entry stop from Jan. 31, 2015
35	Takes 3 working days for manufacturing lead-time.
36	Takes 10 working days for manufacturing lead-time.
37	TOKUCHU is required when KM80-300/ KM81-300 is ordered.
38	Takes 30 days working for manufacturing lead-time.
39	Cannot be used for the F3YP04 or F3YP08 positioning module since it requires a 48-pin connector. Takes 10 working days for manufacturing lead-time.
40	Takes 7 working days for manufacturing lead-time. Caution: Unlike general cabling work, laying cables (KM61, KM62, KM65 and KM67) requires professional knowledge and skills. We recommend that you engage a subcontractor that specializes in fiber-optic cable laying. Before laying cables, customer should check the cables (immediately after delivery) for any defect.
41	Each rail mount kit is composed of three pieces.
42	Cannot be used together with a rail mount kit.
43	Takes one month (30 working days) for manufacturing lead-time.
44	Input response time 100 µs possible by configuration with F3SP28, F3SP38, F3SP53, F3SP58 and F3SP59.
45	Cannot be used for the F3YP04 or F3YP08 positioning module since it requires a 48-pin connector. Takes 10 working days for manufacturing lead-time.
46	Contact Product Management for details on availability and pricing.

Parts / Accessories

Base Modules

Power Supply Modules

CPU port/D-sub 9-pin adapter cable

Cable for programming tools

Sequence CPU module

OS-Free CPU Module

Input module

Output module

Input/output module

Analog input/output module

Temperature/PID Control Module

Temperature Monitoring Module

Personal computer link module

DeviceNet Module

Ethernet interface module

FL-net Interface Module

NX Interface Module

GP-IB communication module

Ladder Communication module

FA-Link H module

Fiber-optic FA-Link H module

Fiber-optic FA-Bus module

Fiber-optic FA-Bus 2 module

Modbus Interface Module

FA Bus Type 2 Module

High-speed counter module

Pulse input module

Positioning module (with pulse output)

Positioning module (with analog voltage output)

Positioning Module with MECHATROLINK - II Interface

Positioning Module with MECHATROLINK - III Interface

High-speed Data Acquistion Module

Blank Module

Fiber-optic code (for connection inside panel) (DCV-HC-20/07HC-20/07) (for F3LR02, LP12)

Terminal block unit

Connector Terminal block

YHLS Master Module

YHLS Slave Unit - Input-Output Modules

YHLS Slave Unit - Input Modules

YHLS Slave Unit - Output Modules

YHLS Fixed Cable

YHLS Flexible Cable

Software Packages

Terminal Block Connector Cable

Fiber-optic cable for indoor connection (2-C-V HC-20/07)(for F3LR01, F3LR02, F3LP12)

Fiber-optic cable for indoor connection (2-C-V HC-20/07) (for F3LR01, F3LR02, F3LP12)

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)