YCA Store | Products | Flowmeters | ROTAMASS | RotaMASS Hygienic + Ultimate - Stainless Steel

Product Categories

#	Model/Spec/Part No.	Description	Notes
RCUH25S Qnom = 1.6 t/h (59 lb/min)
01 Process Connection (Please make one selection)
	-25HS8	DN25 clamp, process connection dimensions according tri-clover (tri-clamp) and Mini clamp	1
	-40HS8	DN40 clamp, process connection dimensions according tri-clover (tri-clamp) and Mini clamp	1
02 Sensor housing material
	0	sensor housing material SUS 304 (1.4301)
03 Medium temperature range
	-0	standard process fluid temperature range integral: -50 to 140°C (-58 to 284 °F) remote: -70 to 140°C (-94 to 284 °F)
04 Mass flow and density accuracy (Please make one selection)
	50	G: 0,5% m flow gas: 0,5% mass flow accuracy
	C2	L: 0,1% m flow+0.5 kg/m³ liquid: 0,1% mass flow accuracy and 0.5 kg/m³ density accuracy
	C3	L: 0,1% m flow+1,0 kg/m³ liquid: 0,1% mass flow accuracy and 1,0 kg/m³ density accuracy
	C7	L: 0,1% m flow+4 kg/m³ liquid: 0,1% mass flow accuracy and 4 kg/m³ density accuracy
	D7	L: 0,15% m flow+4 kg/m³ liquid: 0,15% mass flow accuracy and 4 kg/m³ density accuracy
	E7	L: 0,2% m flow+4 kg/m³ liquid: 0,2% mass flow accuracy and 4 kg/m³ density accuracy
05 Design and housing (Please make one selection)
	0	I:AL housing UP paint integral: low copper aluminium housing urethane-cured polyester powder coating	2
	2	I:AL housing corrosion paint integral: low copper aluminium housing corrosion protection coating	2
	A	R:AL UP+SS std-neck remote: low copper aluminium housing urethane-cured polyester powder coating SS terminal housing standard neck
	E	R:AL corr paint+ std-neck remote: low copper aluminium housing corrosion protection coating SS terminal housing standard neck
	J	R:SS trans+SS std-neck remote: stainless steel housing stainless steel terminal housing standard neck	19
06 Ex approval (Please make one selection)
	-FF11	FM XP tra+IS sen ABCDEFG FM approval for USA and Canada explosionproof transmitter and intrinsic safe sensor (GP ABCDEFG)
	-FF12	FM XP tra+IS sen CDEFG FM approval for USA and Canada explosionproof transmitter and intrinsic safe sensor (GP CDEFG)
	-NN00	non Ex proof	5
07 Cable entries
	-2	ANSI 1/2 in. NPT
08 Communication type and I/O (Please make one selection)
	-F0	FF FOUNDATION Fieldbus 1 passive pulse output
	-F1	FF IS FOUNDATION Fieldbus intrinsic save 1 passive pulse output
	-G0	PA non IS Profibus PA 1 passive pulse output
	-G1	PA IS Profibus PA intrinsic save 1 passive pulse output
	-JA	IOa, PLp 1 active current output HART, 1 passive pulse output or status output	3
	-JB	IOa, PLp, PLp, IOa 2 active current output HART 2 passive pulse output or status output	3
	-JC	IOa, PLp, DI, IOa 2 active current output HART 1 passive pulse output or status output 1 voltage-free digital input	3
	-JD	IOa, PLp,STp, PLp 1 active current output HART 2 passive pulse output or status output 1 passive status output	3
	-JE	IOa, PLp, DI, PLp 1 active current output HART 2 passive pulse output or status output 1 voltage-free digital input	3
	-JF	IOa, PLp, DI, PLa pull-up 1 active current out HART, 1 passive pulse or statusout,1active pull-up pulse or statusout,1voltage-free digital input	3
	-JG	IOa, PLp, DI, PLa 1 active current out HART, 1 passive pulse or status out, 1 active pulse or status out, 1 voltage-free digital input	3
	-JH	IOa, PLp, IOp, IIa 1 active current output HART 1 passive pulse or status out, 1 active current input, 1 passive current out
	-JJ	IOa, PLp, PLp, IIa 1 active current output HART 2 passive pulse output or status output, 1 active current input
	-JK	IOa, PLp, DI, IIa 1 active current output HART, 1 passive pulse or status output, 1 active current input, 1 voltage-free digital input
	-JL	IOa, PLp, IOp, IIp 1 active current output HART, 1 passive pulse or status out, 1 passive current output, 1 passive current input
	-JM	IOa, PLp, PLp, IIp 1 active current output HART, 2 passive pulse output or status output, 1 passive current input
	-JN	IOa, PLp, DI, IIp 1 active current output HART, 1 passive pulse or status out,1 voltage-free digital input, 1 passive current input
	-JP	IOp, PLp, IOp 1 passive current output HART, 1 passive pulse output or status output, 1 passive current output,	3,4
	-JQ	IOp, PLp, IOp, PLp 1 passive current output HART, 2 passive pulse output or status output, 1 passive current output	3,4
	-JR	IOp, NamPLp, IOp, 1 passive current output HART, 1 passive Namur pulse or status output, 1 passive current output	3,4
	-JS	IOp, NamPLp, IOp, NamPLp 1 passive current output HART, 2 passive Namur pulse or status output, 1 passive current output	3,4
	-M0	MB, PLp 1 passive pulse output or status output, Modbus
	-M2	MB, IIa, PLp 1 active current input, 1 passive pulse output or status output, Modbus	7
	-M3	MB, PLp, PLp 2 passive pulse output or status output, Modbus	7
	-M4	MB, PLa, PLp 1 active pulse output or status output, 1 passive pulse output or status output, Modbus	7
	-M5	MB, PLa pull-up, PLp 1 active pulse ouput or status output with internal pull-up resistor, 1 passive pulse out or status out,Modbus	7
	-M6	MB, IOa, PLp 1 active current output, 1 passive pulse output or status output, Modbus	7
	-M7	MB, IIp, PLp 1 passive current input, 1 passive pulse output or status output, Modbus	7
09 Display
	1	with display
002 Add. namplate information
	/BG	Tag number on nameplate Customer-specific tag number on nameplate
003 Pre-setting custom. Param.
	/PS	Presetting sel. parameters Presetting of selected parameters based on customer data	10
006 Conc. & Petr. Measurement
	/AC0	Advanced conc measurement Advanced concentration measurement
	/AC1	/AC0+1 presetted set Advanced concentration measurement with 1 pre-set
	/AC2	/AC0+2 presetted set Advanced concentration measurement with 2 pre-sets
	/AC3	/AC0+3 presetted set Advanced concentration measurement with 3 pre-sets
	/AC4	/AC0+4 presetted set Advanced concentration measurement with 4 pre-sets
	/CST	Concentration meas. Standard concentration measurement
008 Customer-specific calibr.
	/K2	5 pt calibr+factory cert Customized 5 point mass-/volume-flow calibration using water with factory certificate
	/K5	10 pt calibr+Dakks cert Customized 10 point mass-/volume-flow calibration using water with DAkkS certificate
009 Certificate of Compliance
	/P2	2.1 certificate EN 10204 Declaration of compliance with the order 2.1 acc. EN 10204
	/P3	3.1 certificate EN 10204 Inspection certificate 3.1 acc. EN 10204 (QIC)
010 material certificates
	/P6	material certificate acc. to EN 10204: 2004 -3.1 incl. IGC conform to NACE MR0175, MR0103
011 Sanitary options
	/SA	3-A product conformity Surface Roughness wetted parts Ra<=0.8µm test report, 3-A certificate and marking
	/SE	EHEDG product conformity Surface Roughness wetted parts Ra<=0.8µm test report EHEDG certificate and marking	20
	/SF2	Test rep. surface roughn. Surface Roughness wetted parts Ra<=0.8µm test report,
012 Pressure testing
	/P8	Pressure test certificate Pressure test certificate
013 Surface oil & grease free
	/H1	Degreasing wetted surfaces Degreasing of wetted surfaces acc. ASTM G93/G93M-19, level C, test report
014 welding certificate
	/WP	incl.: WPS, WPQR, WQC WPS according DIN EN ISO 15609-1 WPQR according DIN EN ISO 15614-1 WQC according DIN EN 287-1 and ISO6906-4	9
	/WPA	Weld. proced. acc ASME IX Welding procedures and certificate welding according ASME IX	12
015 calibration certificate
	/L2	calibration certificate with working standards
	/L3	calibration certificate with primary standards
	/L4	calibration certificate including measuring instruments control system
017 X-ray insp. flg. weld seam
	/RT	X-ray test flange weld X-ray examination of flange welding acc. DIN EN ISO 17636-1/B, AD2000 HP 5/3 DIN EN ISO 5817/C, including certificate	9
	/RTA	X-ray test acc. ASME V Dye penetrant test of flange welding, acc. ASME V including test report	8
018 PMI of wetted parts
	/PM	PMI test PMI test for pressure containing parts, including certificate
019 Dye penetr. test weld seam
	/PT	Dye pen test flange weld Dye penetrant test of flange welding, acc. DIN EN ISO 3452-1 including test report	13
	/PTA	Dye pen. test acc ASME V Dye penetrant test of flange welding acc. ASME V including test report	12
020 combined certificate
	/P20	comb /PTA+/WPA+/RTA Dye Penetrant test for flange acc ASME V welding procedure for flange acc ASME IX X-ray test according ASME V	11
021 Tube health check
	/TC	Tube health check Tube health check
023 Batching function
	/BT	Batching function Batching and filling function	16,18
024 Transmitter rotated 180°
	/RB	180° rotatable term box 180 degrees rotated terminal box
025 Viscosity function
	/VM	Viscosity function liquids Viscosity computing function for liquids
026 Custody transfer
	/Q20	NTEP approval accuracy class 0.3 acc. NIST Handbook 44	21
034 Connect. cable type + len.
	/L000	No std connecting cab No standard connecting cable separate order for standard sensor cable
	/L005	5m (16,4 ft) std cab 5 meter (16,4 ft) remote sensor cable terminated non Ex black / Ex blue
	/L010	10m (32,8 ft) std cab 10 meter (32,8 ft) remote sensor cable terminated non Ex black / Ex blue
	/L015	15m (49,2 ft) std cab 15 meter (49,2 ft) remote sensor cable terminated non Ex black / Ex blue
	/L020	20m (65,6 ft) std cab 20 meter (65,6 ft) remote sensor cable terminated non Ex black / Ex blue
	/L030	30m (98,4 ft) std cab 30 meter (98,4 ft) remote sensor cable terminated non Ex black / Ex blue
040 Steel arm. connect. cable
	/LAC	Steel armored cable Steel armored version of standard connecting cable	22

Your Product

Subgroup | Page

ROTAMASS | RotaMASS Hygienic + Ultimate - Stainless Steel

Model

RCUH25S

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	Price pages are for price reference only. Refer to Flow Configurator for correct model code configurations and descriptions.

**Product Notes**
Note Id	Description
1	Refer to flow configurator or general specification on what sizes can be combined with your flow tubes
2	not with option L0??
3	not with option CGC
4	only with Ex approval KF2?, SF2?, FF1?
5	not with JP, JQ, JR, JS
6	Can not be combined with design and housing 0, 2
7	Can not be combined with option CGC or PS.
8	Can not be combined with WP, RT, PT, T??, Only for Process connection BA or CA.
9	Can not be combined with P20.
10	Can not be used with communication type and I/0 M?.
11	Is not selectable for mass flow and density accuracy 50. Also, can not be combined with communication type and I/O J?.
12	Can not be combined with WP, RT, PT, T??, Only for Process connection BA or CA.
13	Can not be combined with P20.
14	Not with mass flow and density accuracy 70, 50
15	Only with communication type and I/O JH, JJ, JK, JL, JM, JN
16	Only with communication type and I/O J?
17	Not available for FM Explosion Proof type.
18	Not available for I/O type F0, G0 and G1.
19	Can not be combined with /SA and /RB option
20	For meter size 80 not with process connection -50
21	Not available with options /QR,/QR2,/QR3 and /Q11.
22	Can not be combined with design and housing J (Stainless steel)

RCUH25S Qnom = 1.6 t/h (59 lb/min)

01 Process Connection (Please make one selection)

02 Sensor housing material

03 Medium temperature range

04 Mass flow and density accuracy (Please make one selection)

05 Design and housing (Please make one selection)

06 Ex approval (Please make one selection)

07 Cable entries

08 Communication type and I/O (Please make one selection)

09 Display

002 Add. namplate information

003 Pre-setting custom. Param.

006 Conc. & Petr. Measurement

008 Customer-specific calibr.

009 Certificate of Compliance

010 material certificates

011 Sanitary options

012 Pressure testing

013 Surface oil & grease free

014 welding certificate

015 calibration certificate

017 X-ray insp. flg. weld seam

018 PMI of wetted parts

019 Dye penetr. test weld seam

020 combined certificate

021 Tube health check

023 Batching function

024 Transmitter rotated 180°

025 Viscosity function

026 Custody transfer

034 Connect. cable type + len.

040 Steel arm. connect. cable

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Process Connection
(Please make one selection)

04 Mass flow and density accuracy
(Please make one selection)

05 Design and housing
(Please make one selection)

06 Ex approval
(Please make one selection)

08 Communication type and I/O
(Please make one selection)