YCA Store | Products | Flowmeters | ROTAMASS | Spare transmitter for Rotamass 3 sensors

Product Categories

#	Model/Spec/Part No.	Description
RCU31FH Spare transmitter Rotamass 3, 39/IR ,HC
01 Process con. size and type
	-NNNNN	Spare transmitter without sensor
02 Sensor housing material
	N	Spare transmitter w/o sensor
03 Process fluid temp. range (Please make one selection)
	-0	Standard process fluid temperature range integral: -50 to 150°C (-58 to 302 °F) remote: -70 to 150°C (-56,7 to 302 °F)
	-1	low temperature process fluid temperature range remote: -196 to 150°C (-320,8 to 302 °F)
	-2	mid temperature process fluid temperature range remote: -70 to 230°C (-56,7 to 446 °F)
	-3	high temperature process fluid temperature range remote: 0 to 350°C (32 to 662 °F)
04 Mass flow and density acc.
	NN	Spare transmitter w/o sensor
05 Design and housing (Please make one selection)
	A	R:AL UP+SS std-neck remote: low copper aluminium housing urethane-cured polyester powder coating SS terminal housing standard neck
	E	R:AL corr paint+ std-neck remote: low copper aluminium housing corrosion protection coating SS terminal housing standard neck
	J	R:SS trans+SS std-neck remote: stainless steel housing stainless steel terminal housing standard neck
06 Ex approval (Please make one selection)
	-FF11	FM XP tra+IS sen ABCDEFG FM approval for USA and Canada explosionproof transmitter and intrinsic safe sensor (GP ABCDEFG)
	-FF12	FM XP tra+IS sen CDEFG FM approval for USA and Canada explosionproof transmitter and intrinsic safe sensor (GP CDEFG)
	-NN00	non Ex proof
07 Cable entries
	-2	ANSI 1/2 in. NPT
08 Communication type and I/O (Please make one selection)
	-F0	FF FOUNDATION Fieldbus 1 passive pulse output
	-F1	FF IS FOUNDATION Fieldbus intrinsic save 1 passive pulse output
	-G0	PA non IS Profibus PA 1 passive pulse output
	-G1	PA IS Profibus PA intrinsic save 1 passive pulse output
	-JA	IOa, PLp 1 active current output HART 1 passive pulse output or status output
	-JB	IOa, PLp, PLp, IOa 2 active current output HART 2 passive pulse output or status output
	-JC	IOa, PLp, DI, IOa 2 active current output HART 1 passive pulse output or status output 1 voltage-free digital input
	-JD	IOa, PLp,STp, PLp 1 active current output HART 2 passive pulse output or status output 1 passive status output
	-JE	IOa, PLp, DI, PLp 1 active current output HART 2 passive pulse output or status output 1 voltage-free digital input
	-JF	IOa, PLp, DI, PLa pull-up 1 active current out HART, 1 passive pulse or statusout,1active pull-up pulse or statusout,1voltage-free digital input
	-JG	IOa, PLp, DI, PLa 1 active current out HART, 1 passive pulse or status out, 1 active pulse or status out, 1 voltage-free digital input
	-JH	IOa, PLp, IOp, IIa 1 active current output HART 1 passive pulse or status out, 1 active current input, 1 passive current out
	-JJ	IOa, PLp, PLp, IIa 1 active current output HART 2 passive pulse output or status output, 1 active current input
	-JK	IOa, PLp, DI, IIa 1 active current output HART, 1 passive pulse or status output, 1 active current input, 1 voltage-free digital input
	-JL	IOa, PLp, IOp, IIp 1 active current output HART 1 passive pulse or status out, 1 passive current output, 1 passive current input
	-JM	IOa, PLp, PLp, IIp 1 active current output HART 2 passive pulse output or status output 1 passive current input
	-JN	IOa, PLp, DI, IIp 1 active current output HART, 1 passive pulse or status out,1 voltage-free digital input, 1 passive current input
	-JP	IOp, PLp, IOp 1 passive current output HART 1 passive pulse output or status output 1 passive current output
	-JQ	IOp, PLp, IOp, PLp 1 passive current output HART 2 passive pulse output or status output 1 passive current output
	-JR	IOp, NamPLp, IOp 1 passive current output HART 1 passive Namur pulse or status output 1 passive current output
	-JS	IOp, NamPLp, IOp, NamPLp 1 passive current output HART 2 passive Namur pulse or status output 1 passive current output
	-M0	PLp, MB 1 passive pulse output or status output, Modbus
	-M2	IIa, PLp, MB 1 active current input, 1 passive pulse output or status output, Modbus
	-M3	PLp, PLp, MB 2 passive pulse output or status output, Modbus
	-M4	PLa, PLp, MB 1 active pulse output or status output, 1 passive pulse output or status output, Modbus
	-M5	PLa pull-up, PLp, MB 1 active pulse ouput or status output with internal pull-up resistor, 1 passive pulse out or status out,Modbus
	-M6	IOa, PLp, MB 1 active current output, 1 passive pulse output or status output, Modbus
	-M7	IIp, PLp, MB 1 passive current input, 1 passive pulse output or status output, Modbus
09 Display
	1	with display
002 Add. namplate information
	/BG	Tag number on nameplate Customer-specific tag number on nameplate
006 Conc. & Petr. Measurement
	/AC0	Advanced conc measurement Advanced concentration measurement
	/AC1	/AC0+1 presetted set Advanced concentration measurement with 1 pre-set
	/AC2	/AC0+2 presetted set Advanced concentration measurement with 2 pre-sets
	/AC3	/AC0+3 presetted set Advanced concentration measurement with 3 pre-sets
	/AC4	/AC0+4 presetted set Advanced concentration measurement with 4 pre-sets
	/C52	Net Oil Computing following API standard
	/CST	Concentration meas. Standard concentration measurement
021 Tube health check
	/TC	Tube health check Tube health check
023 Batching function
	/BT	Batching function Batching and filling function
031 Measurem. heat quantity
	/CGC	Measurem.of heat quantity Measurement of heat quantity
034 Connect. cable type + len.
	/L000	No std connecting cab No standard connecting cable separate order for standard sensor cable

Your Product

Subgroup | Page

ROTAMASS | Spare transmitter for Rotamass 3 sensors

Model

RCU31FH

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	Price pages are for price reference only.
How to build MS Code	Refer to Flow Configurator for correct model code configurations and descriptions.
Example MS Code	RCU3NNN-NNNNNN-NNNA-FF11-2-JA1/L000

**Product Notes**
Note Id	Description
1	not with JP, JQ, JR, JS
2	not with option CGC, BT
3	only with Ex approval KF2_, SF_, FF1
4	Only with communication type JH, JJ, JK, JL, JM, JN
5	Only with communication type JH, JJ, JK, JL, JM, JN, M2, M7
6	only with communication type and I/O J_
7	Accuracy of Spare transmitter and existing tube\ per Universal Transmitter GS
8	No sensor cable - Mandatory option for Spare transmitter for Series 3 sensor.
9	Not available for FM Explosion Proof type.
10	Not available for I/O type F0, G0 and G1.

RCU31FH Spare transmitter Rotamass 3, 39/IR ,HC

01 Process con. size and type

02 Sensor housing material

03 Process fluid temp. range (Please make one selection)

04 Mass flow and density acc.

05 Design and housing (Please make one selection)

06 Ex approval (Please make one selection)

07 Cable entries

08 Communication type and I/O (Please make one selection)

09 Display

002 Add. namplate information

006 Conc. & Petr. Measurement

021 Tube health check

023 Batching function

031 Measurem. heat quantity

034 Connect. cable type + len.

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

03 Process fluid temp. range
(Please make one selection)

05 Design and housing
(Please make one selection)

06 Ex approval
(Please make one selection)

08 Communication type and I/O
(Please make one selection)