YCA Store | Products | Flowmeters | ROTAMASS | Spare Sensor RotaMASS Giga - Hastelloy

Product Categories

#	Model/Spec/Part No.	Description		Notes
RCNG1FH Spare Sensor RM TI Giga, 300t/h, HC
01 process con. size and type (Please make one selection)			1
	-1FBA1	6" ASME flange class 150, process connection dimension and facing according ASME B16.5
	-1FBA2	6" ASME flange class 300, process connection dimension and facing according ASME B16.5
	-1QBA1	5" ASME flange class 150, process connection dimension and facing according ASME B16.5
	-1QBA2	5" ASME flange class 300, process connection dimension and facing according ASME B16.5
	-1QBA4	5" ASME flange class 600, process connection dimension and facing according ASME B16.5
02 Sensor housing material (Please make one selection)			1
	0	Sensor housing mat. SUS 304 Sensor housing material SUS 304 (1.4301)
	1	Sensor hous. mat 316L/1.4404 Sensor housing material SUS 316L(1.4404)
03 Process fluid temp. range (Please make one selection)			1
	-0	standard process fluid temperature range integral: -50 to 150°C (-58 to 302 °F) remote: -70 to 150°C (-56,7 to 302 °F)
	-2	mid temperature process fluid temperature range remote: -70 to 230°C (-56,7 to 446 °F)		2
	-3	high temperature process fluid temperature range remote: 0 to 350°C (32 to 662 °F)		2
04 mass flow and density acc. (Please make one selection)			1
	30	G: 0,35% m flow Gas: 0,35% mass flow accuracy		3,4
	C5	L: 0,1% m flow+2 kg/m³ liquid: 0,1% mass flow accuracy and 2 kg/m³ density accuracy		3
05 Design and housing (Please make one selection)			1
	A	R:AL UP+SS std-neck remote: low copper aluminium housing, urethane-cured polyester powder coating SS terminal housing standard neck
	B	R:AL UP+SS long-neck remote: low copper aluminium housing, urethane-cured polyester powder coating SS terminal housing long neck
	E	R:AL corr paint+ std-neck remote: low copper aluminium housing, corrosion protection coating SS terminal housing standard neck
	F	R:AL corr paint+SS long-neck remote: low copper aluminium housing, corrosion protection coating SS terminal housing long neck
	J	R:SS trans+SS std-neck remote: stainless steel housing stainless steel terminal housing standard neck		5
	K	R:SS trans+SS long-neck remote: stainless steel housing stainless steel terminal housing long neck
06 Ex approval (Please make one selection)			1
	-FF11	FM XP tra+IS sen ABCDEFG FM approval for USA and Canada, explosionproof transmitter and intrinsic safe sensor (GP ABCDEFG)
	-FF12	FM XP tra+IS sen CDEFG FM approval for USA and Canada, explosionproof transmitter and intrinsic safe sensor (GP CDEFG)
	-NN00	non Ex proof
07 Cable entries			1
	-2	ANSI 1/2 in. NPT
08 Communication type and I/O			1
	-NN	Sensor only
09 display			1
	N	Sensor only
002 Add. namplate information			1
	/BG	Tag number on nameplate Customer-specific tag number on nameplate
005 Country-specific appl.			1
	/CS	CRN Canadian Registration Number CRN		6
007 Rupture disc			1
	/RD	rupture disk rupture disk
009 Accord. w. terms of order			1
	/P2	2.1 certificate EN 10204 Declaration of compliance with the order 2.1 acc. EN 10204
	/P3	3.1 certificate EN 10204 Inspection certificate 3.1 acc. EN 10204 (QIC)		7
010 material certificates			1
	/P6	material certificate acc. to EN 10204: 2004 -3.1 incl. IGC conform to NACE MR0175, MR0103		7
012 Pressure testing			1
	/P8	Pressure test certificate Pressure test certificate		8
013 Surface oil & grease free			1
	/H1	Degreasing wetted surfaces Degreasing of wetted surfaces acc. ASTM G93/G93M-19, level C, test report
014 welding certificate			1
	/WP	incl.: WPS, WPQR, WQC WPS according DIN EN ISO 15609-1 , WPQR according DIN EN ISO 15614-1 , WQC according DIN EN 287-1 and ISO6906-4		9
	/WPA	Weld. proced. acc ASME IX Welding procedures and certificate welding according ASME IX		10,11
016 ASME B31.3 compliance			1
	/P15	ASME B31.3 NORM FLU. SER ASME B31.3 compliance, NORMAL FLUID SERVICE		11,12
018 PMI of wetted parts			1
	/PM	PMI test PMI test for pressure containing parts, including certificate		13
019 Dye penetr. test weld seam			1
	/PT	Dye pen test flange weld Dye penetrant test of flange welding acc. DIN EN ISO 3452-1 including test report		14
	/PTA	Dye pen. test acc ASME V Dye penetrant test of flange welding acc. ASME V including test report		10,11
027 Insulation & heat tracing			1
	/T10	Insulation Insulation		15,16
	/T21	/T10+heat. ASME1/2in. 150 Insulation and heat tracing with ASME 1/2 in. class 150 connection raised face		15,16
	/T31	/T21+ventilation Insulation, heat tracing and ventilation with ASME 1/2 in. class 150 connection raised face		15,16

Your Product

Subgroup | Page

ROTAMASS | Spare Sensor RotaMASS Giga - Hastelloy

Model

RCNG1FH

Configuration

Parts/Accessories (separate line)

View Cart

**Product Notes**
Note Id	Description
1	For process connection restriction/combination notes, please check the EPB page for the specific Ultimate family, or refer to GS (General specification) for the respective sensor family.
2	Can not be combined with design and housing 0, 2, A, E.
3	If Transmitter accuracy is lower than the spare sensor, Transmitter accuracy is applied.
4	Not with option CST, AC?, C52, VM
5	Can not be combined with Temperature range -2 or -3. Also, not with RB or T??.
6	Only available for ASME Flange (BA? or CA?)
7	Not with options P10, P11, P12, P13, P21, P22.
8	Not with options P10, P12, P13, P14, P21.
9	Not with options P13, P14, P15, P16, P2?
10	Not with options P12, P13, P14, P2?
11	Only with process connection type BA? or CA?
12	Not with options P12, P13, P14, T??, SF1, SF2, SA, SE.
13	Not with options P11, P13, P14, P22.
14	Not with options P12,P13, P15, P16, P2?.
15	Not with design and housing 0, 2, A, E, J.
16	Not with options RD, RB, P15, MC?, SA, SE.
17	Not with mass flow and density accuracy C2.
18	Not with options SF?, SA, SE, MC?.
19	Check Process Connection Table in General Specification for more details.

RCNG1FH Spare Sensor RM TI Giga, 300t/h, HC

01 process con. size and type (Please make one selection)

02 Sensor housing material (Please make one selection)

03 Process fluid temp. range (Please make one selection)

04 mass flow and density acc. (Please make one selection)

05 Design and housing (Please make one selection)

06 Ex approval (Please make one selection)

07 Cable entries

08 Communication type and I/O

09 display

002 Add. namplate information

005 Country-specific appl.

007 Rupture disc

009 Accord. w. terms of order

010 material certificates

012 Pressure testing

013 Surface oil & grease free

014 welding certificate

016 ASME B31.3 compliance

018 PMI of wetted parts

019 Dye penetr. test weld seam

027 Insulation & heat tracing

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 process con. size and type
(Please make one selection)

02 Sensor housing material
(Please make one selection)

03 Process fluid temp. range
(Please make one selection)

04 mass flow and density acc.
(Please make one selection)

05 Design and housing
(Please make one selection)

06 Ex approval
(Please make one selection)