YCA Store | Products | Transmitters | Wireless Products | FN310

#	Model/Spec/Part No.	Description	Notes
FN310 Field Wireless Multi-Protocol Module (GS 01W03D01-01EN)			4
01 Inter Module Communication
	-A1	Digital communication for FN series
02 Protocol (Please make one selection)
	-J	Digital communication (HART 7)
	-M	Digital communication (RS485 Modbus protocol)	6,7
03 Housing Material
	0	Plastic (Polycarbonate)
04 Electrical Connection (Please make one selection)
	1	Horizontal connection: blind plug, Vertical connection: 1/2 NPT female	1
	0	Horizontal connection: blind plug, Vertical connection: G 1/2 female	1
	2	Horizontal connection: blind plug, Vertical connection: M20 female	1
	3	Horizontal connection: G 1/2 male with clamp, Vertical connection: blind plug	2
	4	Horizontal connection: 1/2 NPT male with clamp, Vertical connection: blind plug	2
	5	Horizontal connection: M20 male with clamp, Vertical connection: blind plug	2
	6	Horizontal connection: blind plug, Vertical connection: blind plug	3
05 Specifications
	A	Always A
06 Integral Indicator
	-D	Ditital indicator
07 Mounting Bracket (Please make one selection)
	K	316 SST 2-inch pipe mounting (for vertical piping)
	J	316 SST 2-inch pipe mounting (for horizontal piping)
	N	None
08 Specifications
	A	Always A
09 Specifications
	A	Always A
10 Specifications
	-A	Always A
11 Specifications
	A	Always A
002 Optional Features
	/N4	Wired tag plate
003 Optional Features
	/DT2	Connection device type: SENCOM (FU20F-NPT)	5
004 Optional Features
	/FS17	FM Intrinsically safe Approval (US)
	/CS17	FM Intrinsically safe Approval (Canada)

Your Product

Wireless Products | FN310

FN310

View Cart

**General Notes**
Title	Description
How to Order	Refer to the "Ordering Information" section of the GS noted.
How to build MS Code	One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear.
Example MS Code	Typically Stocked Model Code: FN310 -A1 -M 01A -DKAA -AA /DT2/FS17

**Product Notes**
Note Id	Description
1	Cable gland not included.
2	Select when directly attached to the Electrical Connection of the HART device.
3	Select when using FN310 as a routing device.
4	Requires FN120 to function.
5	Required when Communication Protocol -M is selected. Order SENCOM probe separately.
6	Select only with /DT2 SENCOM pH probe option. General Modbus funtion is not supported.
7	Battery pack is included. Batteries sold separately.