YCA Store | Products | Transmitters | Wika Diaphragm Seals | WIKA Diaphragm Seal (FLX)

Product Categories

#	Model/Spec/Part No.	Description	Notes
FLX Flanged Extended Diaphragm Seal (RJGW FWx.xE; WIKA 990.29)
01 Process Connection Size & T (Please make one selection)
	-20	2.0 inch
	-30	3.0 inch
	-40	4.0 inch
02 Always (Please make one selection)
	1	ANSI 150#
	3	ANSI 300#
	6	ANSI 600#
03 Always (Please make one selection)
	2	2.0 inch Extension (50mm)
	4	4.0 inch Extension (100mm)
	6	6.0 inch Extension (150mm)
	8	8.0 inch Extension (200mm)
04 Wetted, Extension / Diaphragm (Please make one selection)
	SHC	316 SST / Hastelloy C-276
	SSS	316 SST / 316L SST
05 Always
	N	Always
06 Lower Housing Matl(Weld Spu
	0	Always
07 Lower Housing Type(Weld Spu
	0	Always
08 Fill Fluid (Please make one selection)
	A	DC200-10 Silicone (KN68) (-103 to +482 DegF)	5
	B	DC704 Silicone (KN32) (-13 to +752 DegF)	5
	C	Halocarbon 6.3 (Inert) (KN21) (-76 to +346 DegF)	5
	D	Neobee M20 (KN59) (-31 to +500 DegF)	5,6
	L	Fluorolube (Inert) (KN8) (-40 to +500 DegF)	5
	P	Syltherm 800 (KN72) (-40 to +572 DegF)	5
	S	Syltherm XLT (-150 to +500 DegF)	5
09 Always (Please make one selection)
	000	Direct-mount (for use with a traditional mount transmitter)
	05A	5 Feet (1.6m) Armoured Capillary
	05P	5 Feet (1.6m) PVC Coated Capillary
	10A	10 Feet (3m) Armoured Capillary
	10P	10 Feet (3m) PVC Coated Capillary
	15A	15 Feet (4.5m) Armoured Capillary
	15P	15 Feet (4.5m) PVC Coated Capillary
	20A	20 Feet (6m) Armoured Capillary
	20P	20 Feet (6m) PVC Coated Capillary
	25A	25 Feet (8m) Armoured Capillary
	25P	25 Feet (8m) PVC Coated Capillary
	30A	30 Feet (9m) Armoured Capillary
	30P	30 Feet (9m) PVC Coated Capillary
	4CE	Close-coupled 4-inch SST cooling element (For use with an inline mount transmitter)	2
	CCC	Close-coupled Connection (For use with an inline mount transmitter)	2
10 Attachment to Transmitter (Please make one selection)
	DDP	Attach two seals to a differential pressure transmitter, one to the high-pressure side and one to the low-pressure side (EJA110E or EJX110A) (Requires a Quantity of two (2) seals)	1
	DGP	Attach one seal to an inline mount gauge pressure transmitter (EJA530E or EJX530A)	2
	HDP	Attach one seal to the high-pressure side of a differential pressure transmitter (EJA110E or EJX110A)
	HGP	Attach one seal to a traditional mount gauge pressure transmitter (EJA430E or EJ430A)
	LDP	Attach one seal to the low-pressure side of a differential pressure transmitter (EJA110E or EJX110A)
002 Special Service (Option)
	/C	Calibration Certification
	/H	Helium leak test certificate
	/K	Degreased	3
	/M	Mill Certification (For wetted materials
	/NM	NACE Certificate of Conformance	4

Your Product

Subgroup | Page

Wika Diaphragm Seals | WIKA Diaphragm Seal (FLX)

Model

FLX

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to build MS Code	Specify the Model Number by choosing one code from each section. In the Options section, more than one code may be selected
Example MS Code	FLX-2014SSSN00A05AHGP
Notes:	Questions? -Contact Yokogawa's Technical Assistance Center (TAC)
Technical Assistance Center (TAC)	support@us.yokogawa.com 800-524-7378

**Product Notes**
Note Id	Description
1	Requires a Quantity of two (2) seals.
2	Applicable for the EJA530E or EJX530A. Transmitter must have Process Connection code 4.
3	Select an Inert Fill Fluid when using this option.
4	Requires WIKA Engineering review of material selection.
5	Temperature ranges are valid when pressure is greater than or equal to 0 psig.
6	This fill fluid is FDA 21 approved for Food/Sanitary applications.

FLX Flanged Extended Diaphragm Seal (RJGW FWx.xE; WIKA 990.29)

01 Process Connection Size & T (Please make one selection)

02 Always (Please make one selection)

03 Always (Please make one selection)

04 Wetted, Extension / Diaphragm (Please make one selection)

05 Always

06 Lower Housing Matl(Weld Spu

07 Lower Housing Type(Weld Spu

08 Fill Fluid (Please make one selection)

09 Always (Please make one selection)

10 Attachment to Transmitter (Please make one selection)

002 Special Service (Option)

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Process Connection Size & T
(Please make one selection)

02 Always
(Please make one selection)

03 Always
(Please make one selection)

04 Wetted, Extension / Diaphragm
(Please make one selection)

08 Fill Fluid
(Please make one selection)

09 Always
(Please make one selection)

10 Attachment to Transmitter
(Please make one selection)