The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted.
Refer to the "Ordering Information" section of the GS noted.
How to build MS Code
One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear.
Product Notes
Note Id
Description
1
For External Temperature Input code 0 (Fixed Temperature).
2
Not applicable for Amplifier Housing code 2.
3
Not avialable for Approval Codes code /FS15.
4
RTD not provided.
5
Preset external temperature value is used for density compensation.
6
Tokuchu Approval is required to purchase this option. Contact PMK before quoting. Tokuchu must be approved BEFORE the order is place.
7
Applicable for Electrical Connection code 2, 4, 7, and 9.
8
Applicable for External Temperature Input code -0, -B, -C, and -D.
9
Applicable for External Temperature Input code -0, -1, -2, -3, and -4.
10
Applicable for Process Connection code 3, 4, and 5; Installation code 9; Mounting Bracket code N.
11
Applicable for Installation code 7.
12
This option code includes in Amplifier Housing code 2.
13
Consult factory for correct use of this option. Applicable to Measurement Span (Capsule) code M and H.
14
Applicable to Output Signal code -E.
15
Applicable to Output Signal code -F.
16
Order as a separate line item.
17
Not applicable with Multi Sensing Measurement Function code A, if not selected with Mass Flow Measurement Function code B, then must have configuration software (see FSA120)
18
Percentage of YCA List Price. Warranty only valid within YCA service area.
19
Defines the unit of measure used for the MWP on the data plate. If no code is selected, MWP will be expressed in MPa.
20
Applicable to Installation code -7 and Wetted Parts Material code S.
21
Applicable for Measurement Function code A.
22
/A Lightning Protector must be selected.
23
For HART protocol type; The change of pressure fluctuation is monitored and then detects the impulse line blockage. Refer to TI 01C25A31-01E for detailed technical information required for using this function.
24
For FOUNDATION Fieldbus protocol type; This option code must be specified with option code EE; The change of pressure fluctuation is monitored and then detects the impulse line blockage. Refer to TI 01C25A31-01E for detailed technical information required for using this function.
25
Limited to 16 Characters Maximum. Must be special ordered if more digits are required.
26
General Note for all DPHARP transmitters: Z911 document not available for GS11, GS12, GS16, GU11, GU12, JS4, JS5, J12, PS21,PF23, PF22, NS25, NS21, NS24, NF21, UF1, US1, US24
27
Only available for process connection codes 0 and 5.
28
Only Available for process connection codes 1,2, 3, and 4.
29
Only A
30
Only available for process connection codes 0 or 5.
31
Only available for process connection codes 1,2, 3, or 4.
32
Only available for opt
33
Applicable for process connection codes 0 and 5.
34
Applicable for process connection codes 1,2, 3, and 4.
35
Applicable for option codes UN and N1.
36
Not applicable for plug option code UN.
37
Not applicable for option code N1, N2, and N3.
38
Programming fee cannot be discounted, it is seen as a document.
39
Applicable for Wetted parts material code S.
40
See ‘Ordering Information’ in GS.
41
Not applicable for electrical connection codes 0, 2, and 4.
Add Item to Quote
Please select atleast one item to proceed.
Configuration Error
Selected configuration is not valid. Please read notes and make corrections.
Email Verification Required
Email Verification link has been sent successfully.
Please follow instruction in email to verify
Loading...