YCA Store | Products | Transmitters | Wireless Products | EJX510B / EJX530B

Product Categories

#	Model/Spec/Part No.	Description	Notes
EJX530B Gauge Pressure Transmitter (GS 01C27F01-01EN)			2
01 Output Signal
	-1	Wireless communication (ISA100.11a); successor of code -L
02 Measurement Span (Capsule) (Please make one selection)
	B	2.9 to 290 psig
	C	14.5 to 1,450 psig
	D	72.5 to 7,200 psig
	A	1.16 to 29 psig
03 Wetted Parts Material (Please make one selection)
	S	Process connector: 316L SST, Diaphragm: Hastelloy C-276, Others: 316L SST	3
	H	Process connector: Hastelloy C-276 eq., Diaphragm: Hastelloy C-276, Others: Hastelloy C-276 eq.
04 Process Connections (Please make one selection)
	4	1/2NPT female	3
	7	1/2NPT male
	8	G1/2 male	1
	9	M20 x 1.5 male	1
05 Specifications
	N	Always 'N'
06 Specifications
	-0	Always '-0'
07 Amplifier Housing (Please make one selection)
	9	Material: Cast-aluminum alloy for wireless communication type without antenna (N connector)
	7	Material: Cast-aluminum alloy for wireless communication type with integral antenna
	8	Material: Cast-aluminum alloy for wireless communication type with detachable antenna (2 dBi)
08 Electrical Connection
	J	No electrical connection battery powered type (battery case only; battery cells not included)	8
09 Integral Indicator
	D	Digital indicator
10 Mounting Bracket (Please make one selection)
	F	304 SST 2-inch pipe mounting bracket
	N	None
001 Optional Features
	/FS17	FM intrinsically safe and nonincendive approval
	/CS17	CSA intrinsically safe and nonincendive approval	9
	/KS27	CENELEC ATEX (KEMA) intrinsically safe approval	9
	/SS27	IECEx Intrinsically safe approval	9
003 Optional Features
	/D1	P calibration (psi unit)	5
	/D3	bar calibration (bar unit)	5
	/D4	M calibration (kgf/cm2 unit)	5
005 Optional Features
	/X2	High anti-corrosion coating
007 Optional Features
	/K1	Degrease cleansing treatment	4
	/K2	Degrease cleansing treatment and with fluorinated oil filled capsule	4
	/K3	Fluorinated oil filled capsule
012 Optional Features
	/T05	Pressure test/leak test certificate Test pressure:200 kPa(800 inH2O)
	/T06	Pressure test/leak test certificate Test pressure:2 MPa(290 psi)
	/T07	Pressure test/leak test certificate Test pressure:10 MPa(1450 psi)
	/T08	Pressure test/leak test certificate Test pressure:50 MPa(7200 psi)
015 Optional Features
	/M15	Material certificate:process connector
017 Optional Features
	/A1	Gold-plated diaphragm	4
023 Optional Features
	/PE3	European Pressure Equipment Directive Category III	6
046 Optional Features
	/L4	Calibration certificate: Introduction and Yokogawa traceability control system
	/L5	Calibration certificate: Introduction, Yokogawa traceability control system, and primary standards list
	/L6	Calibration certificate: Introduction, Yokogawa traceability control system, primary standards list, and calibration equipments list
	/L9	Calibration certificate: Introduction, Yokogawa traceability control system, primary standards list, calibration equipments list and their test cert.

Parts / Accessories

(Multiple selections allowed, creates separate lines on the quote.)

Your Product

Subgroup | Page

Wireless Products | EJX510B / EJX530B

Model

EJX530B

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted. Refer to the "Ordering Information" section of the GS noted.
How to build MS Code	One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear.
Example MS Code	Typically Stocked Model Code: EJX530B-1BS4N-09JDN/FS17/D1 EJX530B-1CS4N-09JDF/FS17/D1 EJX530B-1DS4N-09JDN/FS17/D1
Wireless Accessories	See ISA100 Wireless Accessory page(s) in this EPB for required antennas, cables, etc.

**Product Notes**
Note Id	Description
1	Not applicable for combination of Measurement Span (Capsule) code D and Wetted Parts Material code H.
2	This product is regulated by international import/export controls. Government authorization by its residence country is required. Contact Customer Service for required documents.
3	Select this code for remote diaphragm seal attachment.
4	Applicable to Wetted Parts Material code S only.
5	The unit of MWP on the name plate of the housing is the same specified by this option code. If no code is selected the MWP will expressed in MPa.
6	Applicable for Measurement Span (Capsule) code D only.
7	Order as a sperate line item.
8	Batteries sold seperately.
9	Applicable only for Amplifier Housing code 7.

Product Categories

EJX530B Gauge Pressure Transmitter (GS 01C27F01-01EN)

01 Output Signal

02 Measurement Span (Capsule)
(Please make one selection)

03 Wetted Parts Material
(Please make one selection)

04 Process Connections
(Please make one selection)

05 Specifications

06 Specifications

07 Amplifier Housing
(Please make one selection)

08 Electrical Connection

09 Integral Indicator

10 Mounting Bracket
(Please make one selection)

001 Optional Features

003 Optional Features

005 Optional Features

007 Optional Features

012 Optional Features

015 Optional Features

017 Optional Features

023 Optional Features

046 Optional Features

Parts / Accessories

Certificates (Separate Line Item)

Certified Drawings (Separate Line Item)

Optional Accessories (Order as Separate Line Item)

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

EJX530B Gauge Pressure Transmitter (GS 01C27F01-01EN)

01 Output Signal

02 Measurement Span (Capsule) (Please make one selection)

03 Wetted Parts Material (Please make one selection)

04 Process Connections (Please make one selection)

05 Specifications

06 Specifications

07 Amplifier Housing (Please make one selection)

08 Electrical Connection

09 Integral Indicator

10 Mounting Bracket (Please make one selection)

001 Optional Features

003 Optional Features

005 Optional Features

007 Optional Features

012 Optional Features

015 Optional Features

017 Optional Features

023 Optional Features

046 Optional Features

Parts / Accessories

Certificates (Separate Line Item)

Certified Drawings (Separate Line Item)

Optional Accessories (Order as Separate Line Item)

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

02 Measurement Span (Capsule)
(Please make one selection)

03 Wetted Parts Material
(Please make one selection)

04 Process Connections
(Please make one selection)

07 Amplifier Housing
(Please make one selection)

10 Mounting Bracket
(Please make one selection)