YCA Store | Products | Transmitters | DRS | Model EJX530A

Product Categories

#	Model/Spec/Part No.	Description	Notes
EJX530A Direct-mount Gauge Pressure Transmitter [Style: S2] (GS 01C25F01-01EN)
01 Output Signal (Please make one selection)
	-P	Parent for Digital Remote Sensor
	-S	Child for Digital Remote Sensor
02 Measurement Span (Capsule) (Please make one selection)
	A	1.16 to 29 psig
	B	2.9 to 290 psig
	C	14.5 to 1,450 psig
	D	72.5 to 7,200 psig
03 Wetted Parts Material (Please make one selection)
	H	Process connector: Hastelloy C-276 eq., Diaphragm: Hastelloy C-276, Others: Hastelloy C-276 eq.
	S	Process Connector: 316L SST, Diaphragm: Hastelloy C-276, Others: 316L SST
04 Process Connections (Please make one selection)
	4	1/2NPT female
	7	1/2NPT male
	8	G1/2 DIN 16 288 male	1
	9	M20 x 1.5 DIN 16 288 male	1
	P	Direct Mount Diaphragm seal system	2
05 Specifications
	N	Always 'N'
06 Specifications
	-0	Always '-0'
07 Amplifier Housing (Please make one selection)
	1	Cast aluminum alloy
	2	Material: ASTM CF-8M	4
	3	Material: Cast aluminum alloy with corrosion resistance properties	3
08 Electrical Connection (2 Connectors) (Please make one selection)
	2	1/2 NPT female, two electrical connections without blind plugs	9
	4	M20 female, two electrical connections without blind plugs	9
	5	G1/2 female, two electrical connections and a blind plug	5 10
	7	1/2 NPT female, two electrical connections and a blind plug	6 10
	9	M20 female, two electrical connections and a blind plug	5 10
	A	G 1/2 female, two electrical connections with a 316 SST blind plug	10
	C	1/2 NPT female, two electrical connections with a 316 SST blind plug	10
	D	M20 female, two electrical connections with a 316 SST blind plug	10
	F	G1/2 female, two electrical connections	9
09 Integral Indicator (Please make one selection)
	D	Digital indicator	7
	E	Digital indicator with the range setting switch	7
	N	None	8
10 Mounting Bracket (Please make one selection)
	L	316 SST 2-inch pipe mounting
	N	None
001 Optional Features
	/FF1	FM Explosionproof Approval (For Output Code -D, -E, -J, -F, or -G)	11
	/FS14	FM intrinsically safe (for Digital Remote Sensor)	11
	/FU14	Combined /FF1 and /FS1 (For Output Code -D, -E, or -J)	11
	/KF22	ATEX Flameproof Approval (For Output Code -D, -E, -J, -F, or -G)	11
	/KS24	ATEX intrinsically safe (for Digital Remote Sensor)	11
	/KU24	ATEX flameproof and intrinsically safe (for Digital Remote Sensor)	11
	/NF2	NEPSI Flameproof Approval (For Output Signal code -D, -E, or -J)	11
	/NS24	NEPSI Intrinsic safety (for Digital Remote Sensor)	11
	/SF22	IECEx flameproof approval (For Output Signal code -D, -J, -F, -G or -Q)	11
	/SS24	IECEx intrinsically safe (for Digital Remote Sensor)	11
	/SU34	IECEx Intrinsically safe and flameproof	11
	/UF1	INMETRO Flameproof Approval (For Output Signal code -D, -E, or -J)	11
	/US24	INMETRO Intrinsically safe (for Digital Remote Sensor)	11
003 Optional Features
	/D1	P calibration (psi unit)
	/D3	bar calibration (bar unit)
	/D4	M calibration (kgf/cm2 unit)
004 Optional Features
	/P1	Color change, amplifier cover only Munsell code: N1.5, black	12
	/P2	Color change, amplifier cover only Munsell code: 7.5BG4/1.5, jade green	12
	/P7	Color change, amplifier cover only Metallic silver	12
	/PR	Color change, amplifier and terminal covers Munsell code ; 7.5 R4/14, Red
005 Optional Features
	/X2	High anti-corrosion coating	13
007 Optional Features
	/K11	Degrease cleansing treatment
	/K12	Degrease cleansing treatment and with fluorinated oil filled capsule
	/K13	Fluorinated oil filled capsule
	/K15	Degrease cleansing and dehydrating treatment
	/K16	Degrease cleansing and dehydrating treatment with fluorinated oil filled capsule
009 Optional Features
	/C1	Output status at CPU failure and hardware error is -5%, 3.2 mA or less.	10
	/C2	Output signal limits: 3.8 mA to 20.5 mA Output status at CPU failure and hardware error is -5%, 3.2 mA or less.	10
	/C3	Output signal limits: 3.8 mA to 20.5 mA Output status at CPU failure and hardware error is 110%, 21.6 mA or more.	10
010 Optional Features
	/CA	Data Configuration for HART communication type (Software damping, Descriptor and Message)	10
014 Optional Features
	/N4	Stainless steel tag plate wired onto the transmitter	10,18
015 Optional Features
	/M15	Material certificate:process connector
016 Optional Features
	/A1	Gold-plated diaphragm	16
023 Optional Features
	/PE3	European Pressure Equipment Directive Category III	17
026 Optional Features
	/DG6	Multi-sensing process monitoring function: Impulse Line Blockage Detection and Heat trace monitoring	10
027 Optional Features
	/HC	316 SST exterior parts	14
031 Optional Features
	/HE	Fluoro-rubber O-ring All O-rings of amplifier housing	15

Your Product

Subgroup | Page

DRS | Model EJX530A

Model

EJX530A

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted. Refer to the "Ordering Information" section of the GS noted.
How to build MS Code	One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear.
Example MS Code	EJX530A-PBS7N-012DN/FF1/D1

**Product Notes**
Note Id	Description
1	Not applicable for combination of Measurement Span (Capsule) code D and Wetted Parts Material code H.
2	Applicable for the attachment of Yokogawa C20FW or C20FE diaphragm seal systems. Not applicable with Amplifier Housing code 2, Measurement Span (Capsule) code D, or Wetted Part Material code D.
3	Not applicable for Electrical Connection code 5, A, or F.
4	Not applicable for Electrical Connection code 5, 7, or 9.
5	Material of blind plug is aluminum alloy.
6	Material of blind plug is 304 SST.
7	Not applicable with Output Signal code -S.
8	Not applicable with Output Signal code -P.
9	Applicable with Output Signal code -S.
10	Applicable with Output Signal code -P.
11	Applicable for Electrical Connection code 2, 4, 7, 9, C, or D.
12	Not applicable for Amplifier Housing code 2 or 3.
13	Not applicable for Painting (Optional) code P1, P2 or P7. Not applicable for Amplifier Housing code 2.
14	This specification is included with Amplifier Housing code 2. Material is 316 or 316L SST.
15	Tokuchu approval required before quoting this option.
16	Applicable to Wetted Parts Material code S.
17	Applicable to Measurement Span (Capsule) code D. Not applicable with Process Connection code -P.
18	Limited to 16 Characters Maximum. Must be special ordered if more digits are required.

EJX530A Direct-mount Gauge Pressure Transmitter [Style: S2] (GS 01C25F01-01EN)

01 Output Signal (Please make one selection)

02 Measurement Span (Capsule) (Please make one selection)

03 Wetted Parts Material (Please make one selection)

04 Process Connections (Please make one selection)

05 Specifications

06 Specifications

07 Amplifier Housing (Please make one selection)

08 Electrical Connection (2 Connectors) (Please make one selection)

09 Integral Indicator (Please make one selection)

10 Mounting Bracket (Please make one selection)

001 Optional Features

003 Optional Features

004 Optional Features

005 Optional Features

007 Optional Features

009 Optional Features

010 Optional Features

014 Optional Features

015 Optional Features

016 Optional Features

023 Optional Features

026 Optional Features

027 Optional Features

031 Optional Features

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Output Signal
(Please make one selection)

02 Measurement Span (Capsule)
(Please make one selection)

03 Wetted Parts Material
(Please make one selection)

04 Process Connections
(Please make one selection)

07 Amplifier Housing
(Please make one selection)

08 Electrical Connection (2 Connectors)
(Please make one selection)

09 Integral Indicator
(Please make one selection)

10 Mounting Bracket
(Please make one selection)