YCA Store | Products | Transmitters | Gauge Pressure | Model EJX440A

Product Categories

#	Model/Spec/Part No.	Description	Notes
EJX440A Gauge Pressure Transmitter [Style: S2] (GS 01C25E02-01EN)
01 Output Signal (Please make one selection)
	-D	4 to 20 mA DC with digital communication (BRAIN protocol)
	-E	4 to 20 mA DC with digital communication (HART protocol)
	-F	Digital communication (FOUNDATION Fieldbus protocol)
	-G	Digital communication (PROFIBUS PA protocol)
	-J	4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
02 Measurement Span (Capsule) (Please make one selection)
	C	36 to 4,500 psig
	D	36 to 7,200 psig
03 Wetted Parts Material
	S	Cover flange: F316 SST, Capsule: Hastelloy C-276(diaphragm), (F)316L SST(others), Vent plug: 316 SST, Process connector: Stainless steel
04 Process Connections (Please make one selection)
	3	With 1/4NPT female process connector
	4	With 1/2NPT female process connector
	5	Without process connector (1/4 NPT female on cover flange)
05 Bolts and Nuts Material (Please make one selection)
	G	316L SST
	C	ASTM grade660 stainless steel
	J	ASTM-B7 carbon steel
06 Installation (Please make one selection)
	-7	Vertical impulse piping type, left side high pressure, process connectors downside
	-9	Horizontal impulse piping type, left side high pressure
	-3	Vertical impulse piping type, right side high pressure, process connectors downside
	-8	Horizontal impulse piping type, right side high pressure
	-U	Universal flange
07 Amplifier Housing (Please make one selection)
	1	Material: Cast-aluminum alloy
	2	Material: ASTM CF-8M	1
	3	Material: Cast aluminum alloy with corrosion resistance properties	1
08 Electrical Connection (2 Connectors) (Please make one selection)
	2	1/2 NPT female, two electrical connections, without blind plugs
	7	1/2 NPT female, two electrical connections with a blind plug	2
	4	M20 female, two electrical connections without blind plugs
	9	M20 female, two electrical connections with a blind plug	2
	C	1/2 NPT female, two electrical connections with a 316 SST blind plug
	D	M20 female, two electrical connections with a 316 SST blind plug
09 Integral Indicator (Please make one selection)
	D	Digital indicator
	E	Digital indicator with the range setting switch	3
	N	None
10 Mounting Bracket (Please make one selection)
	B	304 SST 2-inch pipe mounting(flat type)
	D	304 SST or SCS13A 2-inch pipe mounting(L type)
	N	None
	J	316 SST 2-inch pipe mounting(flat type)
	K	316 SST or SCS14A 2-inch pipe mounting(L type)
	P	Position adjustable bracket for vertical piping installation, SUS316, 2-inch pipe mounting(L type)
001 Optional Features
	/CS1	CSA Intrinsically safe Approval (For Output Code -D, -E, or -J)	4
	/CU1	Combined /CF1 and /CS1 (For Output Code -D, -E, or -J)	4
	/FF1	FM Explosionproof Approval (For Output Code -D, -E, -J, -F, or -G)
	/FS1	FM Intrinsically Safe Approval (For Output Code -D, -E, or -J)	4
	/FU1	Combined /FF1 and /FS1 (For Output Code -D, -E, or -J)	4
	/CF1	CSA Explosionproof Approval (For Output Code -D, -E, -J, -F, or -G)
	/CS15	CSA Intrinsically safe approval (For Output Signal code -F)
	/FS15	FM Intrinsically Safe and Non-incendive Approval (For Output Code -F)
	/KF22	ATEX Flameproof Approval (For Output Code -D, -E, -J, -F, or -G)
	/KN26	ATEX Type n Approval (For Output Code -F or -G)
	/KS21	ATEX Intrinsically safe Approval (For Output Code -D, -E, or -J)	4
	/KS26	ATEX Intrinsically safe Approval (For Output Code -F or -G)
	/KU22	Combined /KF22, /KS21, and Type n (For Output Code -D, -E, or -J)	4
	/NF21	NEPSI Flameproof and Dust Ignition Proof approval (Output Signal code -D, -E, or -J)	4
	/SF22	IECEx flameproof approval (For Output Signal code -D, -J, -F, -G or -Q)
	/SS25	IECEx Intrinsically safe and Type n Approval (For Output Code -F)
	/SU22	IECEx Intrinsically safe and flameproof (For Output Signal code -D or -J)	4
	/V1U1	Combination Approval (/KU22, /FU1, and /CU1) (For Output Signal code -D, -E, or -J)	4
003 Optional Features
	/D1	P calibration (psi unit)	13
	/D3	bar calibration (bar unit)	13
	/D4	M calibration (kgf/cm2 unit)	13
004 Optional Features
	/P1	Color change, amplifier cover only Munsell code ; N1.5, black	6
	/P2	Color change, amplifier cover only Munsell code ; 7.5BG4/1.5, jade green	6
	/P7	Color change, amplifier cover only Metallic silver	6
	/PR	Color change, amplifier and terminal covers Munsell code ; 7.5 R4/14, Red
005 Optional Features
	/X2	High anti-corrosion coating	6
006 Optional Features
	/A	Lightning protector
007 Optional Features
	/K1	Degrease cleansing treatment
	/K2	Degrease cleansing treatment and with fluorinated oil filled capsule
	/K3	Fluorinated oil filled capsule
	/K41	Degrease cleansing treatment and implementation certificate	14
	/K42	Degrease cleansing treatment with fluorinated oil filled capsule, and implementation certificate	14
	/K45	Degrease cleansing and dehydrating treatment, and implementation certificate	14
	/K46	Degrease cleansing and dehydrating treatment with fluorinated oil filled capsule, and implementation certificate	14
	/K5	Degrease cleansing and dehydrating treatment
	/K6	Degrease cleansing and dehydrating treatment with fluorinated oil filled capsule
008 Optional Features
	/U1	Long vent
009 Optional Features
	/C1	Output status at CPU failure and hardware error is -5%, 3.2 mA or less.
	/C2	Output signal limits: 3.8 mA to 20.5 mA Output status at CPU failure and hardware error is -5%, 3.2 mA or less.
	/C3	Output signal limits: 3.8 mA to 20.5 mA Output status at CPU failure and hardware error is 110%, 21.6 mA or more.
010 Optional Features
	/CA	Data Configuration for HART communication type (Software damping,Descriptor and Message)
	/CB	Data Configuration for BRAIN communication type (Software damping)
	/CC	Data Configuration for FOUNDATION Fieldbus communication type (Software damping)
	/CD	Data configuration for PROFIBUS PA communication type (Software damping)
	/CJ	Data configuration(for HART): Disabling external zero adjustment, Software damping, Descriptor and Message	15
	/CK	Data configuration(for BRAIN): Disables external zero adjustment, Software damping	15
011 Optional Features
	/M01	Material certificate:cover flange
	/M11	Material certificate:cover flange, process connector
	/MA1	Material certificate: Cover flange, diaphragm, capsule body
	/MC1	Material certificate: Cover flange, process connector, diaphragm, capsule body
	/MG1	Material certificate for wetted parts including cover flange, bolt and nut for cover flange, diaphragm, capsule body, vent and drain plug, vent screw, capsule gasket
	/MH1	Material certificate for wetted parts including cover flange, process connector, bolt and nut for cover flange, bolt for process connector, diaphragm, capsule body, vent and drain plug, vent screw, capsule gasket
012 Optional Features
	/T08	Pressure test/leak test certificate Test pressure:50 MPa(7200 psi)
	/T09	Pressure test/leak test certificate Test pressure:32 MPa(4500 psi)
013 Optional Features
	/N1	Right side high pressure. Without drain and vent plugs.	7
	/N2	Right side high pressure. IEC61518 pro- cess connection with female thread on cover flange, with blind kidney flange on back. Without drain and vent plugs.	7
	/N3	Right side high pressure. /N1,/N2 and material certificate for cover flange, diaphragm, capsule body and blind kidney flange.	7
014 Optional Features
	/N4	Stainless steel tag plate wired onto the transmitter	5
016 Optional Features
	/A1	Gold-plated diaphragm
017 Optional Features
	/AL	Status output	3
021 Optional Features
	/EE	Software Download
023 Optional Features
	/PE3	PED 97/23/EC	10
027 Optional Features
	/HC	316 SST exterior parts	8
028 Optional Features
	/GS	Gold-plated capsule gasket Without drain and vent plugs	9
039 Optional Features
	/YP	Parameter List
043 Optional Features
	/SLT	Low temperature expansion of functional safety ambient temperature
046 Optional Features
	/L4	Calibration certificate: Introduction and Yokogawa traceability control system
	/L5	Calibration certificate: Introduction, Yokogawa traceability control system, and primary standards list
	/L6	Calibration certificate: Introduction, Yokogawa traceability control system, primary standards list, and calibration equipments list
	/L9	Calibration certificate: Introduction, Yokogawa traceability control system, primary standards list, calibration equipments list and their test cert.
050 Optional Features
	/BS	Bug screen
051 Optional Features
	/PP	An additional blind plug	16

Your Product

Subgroup | Page

Gauge Pressure | Model EJX440A

Model

EJX440A

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted. Refer to the "Ordering Information" section of the GS noted.
How to build MS Code	One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear.

**Product Notes**
Note Id	Description
1	Not applicable for Electrical Connection code 7 and 9.
2	Material of blind plug is aluminum alloy or 304SS.
3	Not apllicable with Ouput Signal code -F.
4	Not applicable with Status Output (Option) code /AL.
5	Limited to 16 Characters Maximum. Must be special ordered if more digits are required.
6	Not applicable for Amplifier Housing code 2.
7	Applicable for Installation code -9 and bracket code N.
8	The option included in Amplifier Housing code 2.
9	Not applicable for option codes /U1, /N2, /N3, and /M11.
10	Consult factory for correct use of this option. If compliance with category III is needed, specifiy this option code.
11	Percentage of YCA List Price. Warranty only valid on transmitters that stay within the YCA service area. Order as a separate line item.
12	Order as a separate line item.
13	Defines unit of measure used for the MWP on the data plate. If no code is chosen, MWP will be expressed in MPa.
14	Applicable for wetted parts material code S.
15	See ‘Ordering Information’ in GS.
16	Not applicable for electrical connection codes 0, 2, and 4.

EJX440A Gauge Pressure Transmitter [Style: S2] (GS 01C25E02-01EN)

01 Output Signal (Please make one selection)

02 Measurement Span (Capsule) (Please make one selection)

03 Wetted Parts Material

04 Process Connections (Please make one selection)

05 Bolts and Nuts Material (Please make one selection)

06 Installation (Please make one selection)

07 Amplifier Housing (Please make one selection)

08 Electrical Connection (2 Connectors) (Please make one selection)

09 Integral Indicator (Please make one selection)

10 Mounting Bracket (Please make one selection)

001 Optional Features

003 Optional Features

004 Optional Features

005 Optional Features

006 Optional Features

007 Optional Features

008 Optional Features

009 Optional Features

010 Optional Features

011 Optional Features

012 Optional Features

013 Optional Features

014 Optional Features

016 Optional Features

017 Optional Features

021 Optional Features

023 Optional Features

027 Optional Features

028 Optional Features

039 Optional Features

043 Optional Features

046 Optional Features

050 Optional Features

051 Optional Features

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Output Signal
(Please make one selection)

02 Measurement Span (Capsule)
(Please make one selection)

04 Process Connections
(Please make one selection)

05 Bolts and Nuts Material
(Please make one selection)

06 Installation
(Please make one selection)

07 Amplifier Housing
(Please make one selection)

08 Electrical Connection (2 Connectors)
(Please make one selection)

09 Integral Indicator
(Please make one selection)

10 Mounting Bracket
(Please make one selection)