YCA Store | Products | Transmitters | Wireless Products | EJX430B

Product Categories

#	Model/Spec/Part No.	Description	Notes
EJX430B Gauge Pressure Transmitter (GS 01C27B01-01EN)			3
01 Output Signal
	-1	Wireless communication (ISA100.11a); successor of code -L
02 Measurement Span (Capsule) (Please make one selection)
	A	2.5 to 500 psig
	B	12 to 2,300 psig
	H	10 to 2,000 inH2O
03 Wetted Parts Material (Please make one selection)
	A	Cover flange: Hastelloy C-276 equiv. Capsule: Hastelloy C-276(diaphragm and others) Process connector: Hastelloy C-276 equiv. Vent plug: Hastelloy C-276
	B	Cover flange: Monel equivalent Capsule: Monel(diaphragm and others) Process connector: Monel equivalent vent plug: Monel
	D	Cover flange: Hastelloy C-276 equiv. Capsule: Tantalum(diaphragm and others) Process connector: Hastelloy C-276 equiv. Vent plug: Hastelloy C-276
	H	Cover flange: ASTM CF-8M Capsule: Hatelloy C-276(diaphragm and others) Process connector: ASTM CF-8M Vent plug: 316 SST
	M	Cover flange: ASTM CF-8M Capsule: Monel (diaphragm and others) Process connector: ASTM CF-8M Vent plug: 316 SST
	S	Cover flange: ASTM CF-8M Capsule: Hastelloy C-276(diaphragm)/ (F)316L SST(others), Vent plug: 316 SST Process connector: ASTM CF-8M	1
	T	Cover flange: ASTM CF-8M Diaphragm: Tantalum Vent plug: 316 SST Process connector: ASTM CF-8M
04 Process Connections (Please make one selection)
	0	Without process connector (RC1/4 female on cover flanges)
	1	With Rc1/4 female process connector
	2	With Rc1/2 female process connector
	3	With 1/4NPT female process connector
	4	With 1/2NPT female process connector
	5	Without process connector (1/4 NPT female on cover flange)
	W	Assembled with low volume cover flange on high pressure side for diaphragm seal unit with M12 x 1.25 female thread, and shipped with two new capsule gaskets	1
05 Bolts and Nuts Material (Please make one selection)
	C	ASTM grade660 stainless steel
	G	316L SST
	J	ASTM-B7M carbon steel
06 Installation (Please make one selection)
	-3	Vertical impluse piping type, right side high pressure, process connectors downside
	-7	Vertical impluse piping type, left side high pressure, process connectors downside
	-8	Horizontal impulse piping type, right side high pressure
	-9	Horizontal impulse piping type, left side high pressure	1
	-B	Bottom process connection type, left side high pressure	2
	-U	Universal flange	2
07 Amplifier Housing (Please make one selection)
	9	Material: Cast-aluminum alloy for wireless communication type without antenna (N connector)
	7	Material: Cast-aluminum alloy for wireless communication type with integral antenna
	8	Material: Cast-aluminum alloy for wireless communication type with detachable antenna (2 dBi)
08 Electrical Connection
	J	No electrical connection battery powered type(battery case only; battery cells not included)	12
09 Integral Indicator
	D	Digital indicator
10 Mounting Bracket (Please make one selection)
	B	304SST 2-inch pipe mounting(flat type)
	D	304 SST or SCS13A 2-inch pipe mounting (L type)
	K	316 SST or SCS14A 2-inch pipe mounting (L type)
	M	316 SST or SCS14A 2-inch pipe mounting (for bottom process connection)
	N	None
001 Optional Features
	/CS17	CSA intrinsically safe and nonincendive approval	13
	/FS17	FM intrinsically safe and nonincendive approval
	/KS27	CENELEC ATEX (KEMA) intrinsically safe approval	13
	/SS27	IECEx Intrinsically safe approval	13
003 Optional Features
	/D1	P calibration (psi unit)	6
	/D3	bar calibration (bar unit)	6
	/D4	M calibration (kgf/cm2 unit)	6
005 Optional Features
	/X2	High anti-corrosion coating
007 Optional Features
	/K1	Degrease cleansing treatment	4, 5
	/K2	Degrease cleansing treatment and with fluorinated oil filled capsule	4, 5
	/K3	Fluorinated oil filled capsule
	/K5	Degrease cleansing and dehydrating treatment	4, 5
	/K6	Degrease cleansing and dehydrating treatment with fluorinated oil filled capsule	4, 5
008 Optional Features
	/U1	Long vent	7
011 Optional Features
	/M01	Material certificate:cover flange
	/M11	Material certificate:cover flange, proce connector
012 Optional Features
	/T01	Pressure test/leak test certificate Test pressure:3.5 MPa(500 psi)
	/T11	Pressure test/leak test certificate Test pressure:500 kPa(2000 inH2O)
	/T12	Pressure test/leak test certificate Test pressure:16 MPa(2300 psi)
013 Optional Features
	/N1	Right side high pressure. Without drain and vent plugs.	10
	/N2	Right side high pressure. IEC61518 pro- cess connection with female threads on cover flange, with blind kidney flange on back. Without drain and vent plug.	10
	/N3	Right side high pressure. /N1,/N2 and material certificate for cover flange, diaphragm, capsule body and blind kidney flange.	10
017 Optional Features
	/A1	Gold-plated diaphragm	2
028 Optional Features
	/GS	Gold-plated capsule gasket Without drain and vent plugs	8, 9
046 Optional Features
	/L4	Calibration certificate: Introduction and Yokogawa traceability control system
	/L5	Calibration certificate: Introduction, Yokogawa traceability control system, and primary standards list
	/L6	Calibration certificate: Introduction, Yokogawa traceability control system, primary standards list, and calibration equipments list
	/L9	Calibration certificate: Introduction, Yokogawa traceability control system, primary standards list, calibration equipments list and their test cert.

Parts / Accessories

(Multiple selections allowed, creates separate lines on the quote.)

Your Product

Subgroup | Page

Wireless Products | EJX430B

Model

EJX430B

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted. Refer to the "Ordering Information" section of the GS noted.
How to build MS Code	One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear.
Example MS Code	EJX430B-1AS4G-99JDB/FS17/D1 Typically Stocked Model Code: N/A
Wireless Accessories	See ISA100 Wireless Accessory page(s) in this EPB for required antennas, cables, etc.

**Product Notes**
Note Id	Description
1	Select this code for Remote Diaphragm Seal attachment.
2	Applicable only for Wetted Parts Material code S.
3	This product is regulated by international import/export controls. Government authorization by its residence country is required. Contact Customer Service for required documents.
4	Applicable for Wetted Parts Material code S, H, M, or T.
5	Not applicable with Process Connection code W.
6	The unit of MWP on the name plate of the housing is the same unit as specified by Option code /D1, /D3, or /D4. If no code is selected, the unit of MWP will be MPa.
7	Applicable to Installation code -7 and Wetted Parts Material code S, H, M, or T.
8	Applicable for Wetted Parts Material code S; Process Connection code 0 or 5; and Installation code -8 or -9.
9	Not applicable with Option codes /U1, /N2, /N3, or /M11.
10	Applicable for Wetted Parts Material code S, H, M, or T; Process Connection code 3, 4, or 5; Installation code -9; and Mounting Bracket code N.
11	Order as a separate line item.
12	Batteries sold seperately.
13	Only applicable to Amplifier Housing code 7.

Product Categories

EJX430B Gauge Pressure Transmitter (GS 01C27B01-01EN)

01 Output Signal

02 Measurement Span (Capsule)
(Please make one selection)

03 Wetted Parts Material
(Please make one selection)

04 Process Connections
(Please make one selection)

05 Bolts and Nuts Material
(Please make one selection)

06 Installation
(Please make one selection)

07 Amplifier Housing
(Please make one selection)

08 Electrical Connection

09 Integral Indicator

10 Mounting Bracket
(Please make one selection)

001 Optional Features

003 Optional Features

005 Optional Features

007 Optional Features

008 Optional Features

011 Optional Features

012 Optional Features

013 Optional Features

017 Optional Features

028 Optional Features

046 Optional Features

Parts / Accessories

Certificates (Separate Line Item)

Certified Drawings (Separate Line Item)

Optional Accessories (Order as Separate Line Item)

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

EJX430B Gauge Pressure Transmitter (GS 01C27B01-01EN)

01 Output Signal

02 Measurement Span (Capsule) (Please make one selection)

03 Wetted Parts Material (Please make one selection)

04 Process Connections (Please make one selection)

05 Bolts and Nuts Material (Please make one selection)

06 Installation (Please make one selection)

07 Amplifier Housing (Please make one selection)

08 Electrical Connection

09 Integral Indicator

10 Mounting Bracket (Please make one selection)

001 Optional Features

003 Optional Features

005 Optional Features

007 Optional Features

008 Optional Features

011 Optional Features

012 Optional Features

013 Optional Features

017 Optional Features

028 Optional Features

046 Optional Features

Parts / Accessories

Certificates (Separate Line Item)

Certified Drawings (Separate Line Item)

Optional Accessories (Order as Separate Line Item)

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

02 Measurement Span (Capsule)
(Please make one selection)

03 Wetted Parts Material
(Please make one selection)

04 Process Connections
(Please make one selection)

05 Bolts and Nuts Material
(Please make one selection)

06 Installation
(Please make one selection)

07 Amplifier Housing
(Please make one selection)

10 Mounting Bracket
(Please make one selection)