YCA Store | Products | Transmitters | Gauge Pressure | Model EJX430A

Product Categories

#	Model/Spec/Part No.	Description	Notes
EJX430A Gauge Pressure Transmitter (GS 01C25E01-01EN)
01 Output Signal (Please make one selection)
	-D	4 to 20 mA DC with digital communicaiton (BRAIN protocol)
	-E	4 to 20 mA DC with digital communication (HART protocol)
	-J	4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
	-F	Digital communication (FOUNDATION Fieldbus protocol)
	-G	Digital communication (PROFIBUS PA protocol)
02 Measurement Span (Capsule) (Please make one selection)
	A	2.5 to 500 psig
	B	12 to 2,300 psig
	H	10 to 2,000 inH2O
03 Wetted Parts Material (Please make one selection)
	S	Cover flange: ASTM CF-8M, Capsule: Hastelloy C-276(diaphragm), (F)316L SST(others), Vent plug: 316 SST, Process connector: ASTM CF-8M	1
	A	Cover flange: Hastelloy C-276 equiv. Capsule: Hastelloy C-276(diaphragm and others) Process connector: Hastelloy C-276 equiv. Vent plug: Hastelloy C-276
	B	Cover flange: Monel equivalent Capsule: Monel(diaphragm and others) Process connector: Monel equivalent vent plug: Monel
	D	Cover flange: Hastelloy C-276 equiv. Capsule: Tantalum(diaphragm and others) Process connector: Hastelloy C-276 equiv. Vent plug: Hastelloy C-276
	H	Cover flange: ASTM CF-8M Capsule: Hatelloy C-276(diaphragm and others) Process connector: ASTM CF-8M Vent plug: 316 SST
	L	Cover flange: ASTM CF-3M, Capsule: Hastelloy C-276(diaphragm), (F)316L SST(others), Vent plug: 316L SST Process connector: ASTM CF-3M
	M	Cover flange: ASTM CF-8M Capsule: Monel (diaphragm and others) Process connector: ASTM CF-8M Vent plug: 316 SST
	T	Cover flange: ASTM CF-8M Diaphragm: Tantalum Vent plug: 316 SST Process connector: ASTM CF-8M
	W	Cover flange: Duplex SST equiv. Capsule: Hastelloy C-276(diaphragm and others) Process connector: Duplex SST equiv. Vent plug: Duplex SST
04 Process Connections (Please make one selection)
	3	With 1/4NPT female process connector
	4	With 1/2NPT female process connector
	5	Without process connector (1/4 NPT female on cover flange)
	W	Assembled with low volume cover flange on high pressure side for diaphragm seal unit with M12 x 1.25 female thread, and shipped with two new gaskets and O-rings	1
	0	Without process connector (RC1/4 female on cover flanges)
	1	With Rc1/4 female process connector
	2	With Rc1/2 female process connector
05 Bolts and Nuts Material (Please make one selection)
	C	ASTM grade660 stainless steel
	G	316L SST
	J	ASTM-B7 carbon steel
06 Installation (Please make one selection)
	-7	Vertical impulse piping type, left side high pressure, process connectors downside
	-9	Horizontal impulse piping type, left side high pressure	1
	-3	Vertical impulse piping type, right side high pressure, process connectors downside
	-8	Horizontal impulse piping type, right side high pressure
	-B	Bottom process connection type, left side high pressure	2
	-U	Universal flange	2
07 Amplifier Housing (Please make one selection)
	1	Material:Cast-aluminum alloy
	2	Material: ASTM CF-8M	3
	3	Material: Cast aluminum alloy with corrosion resistance properties	4
08 Electrical Connection (2 Connectors) (Please make one selection)
	2	1/2 NPT female, two electrical connections without blind plugs
	7	1/2 NPT female, two electrical connections with a blind plug	6
	C	1/2 NPT female, two electrical connections with a 316 SST blind plug
	0	G 1/2 female, one electrical connection without blind plugs
	4	M20 female, two electrical connections without blind plugs
	5	G1/2 female, two electrical connections with a blind plug	5
	9	M20 female, two electrical connections with a blind plug	5
	A	G 1/2 female, two electrical connections with a 316 SST blind plug
	D	M20 female, two electrical connections with a 316 SST blind plug
09 Integral Indicator (Please make one selection)
	D	Digital indicator	7
	E	Digital indicator with a range setting switch	8
	N	None
10 Mounting Bracket (Please make one selection)
	B	304 SST 2-inch pipe mounting(flat type)
	D	304 SST or SCS13A 2-inch pipe mounting(L type)
	J	316 SST 2-inch pipe mounting(flat type)
	K	316 SST or SCS14A 2-inch pipe mounting(L type)
	M	316 SST or SCS14A 2-inch pipe mounting (for bottom process connection)	9
	N	None
	P	Position adjustable bracket for vertical piping installation, SUS316, 2-inch pipe mounting(L type)
001 Optional Features
	/CF1	CSA Explosionproof Approval (For Output Code -D, -E, -J, -F, or -G)	10
	/CS1	CSA Intrinsically safe Approval (For Output Code -D, -E, or -J)	11
	/CS15	CSA Intrinsically safe approval (For Output Signal code -F)	11
	/CU1	Combined /CF1 and /CS1 (For Output Code -D, -E, or -J)	11
	/FF1	FM Explosionproof Approval (For Output Code -D, -E, -J, -F, or -G)	10
	/FS1	FM Intrinsically Safe Approval (For Output Code -D, -E, or -J)	11
	/FS15	FM Intrinsically Safe and Non-incendive Approval (For Output Code -F)	11
	/FU1	Combined /FF1 and /FS1 (For Output Code -D, -E, or -J)	11
	/KF22	ATEX Flameproof Approval (For Output Code -D, -E, -J, -F, or -G)	10
	/KN26	ATEX Type n Approval (For Output Code -F or -G)	11
	/KS21	ATEX Intrinsically safe Approval (For Output Code -D, -E, or -J)	11
	/KS26	ATEX Intrinsically safe Approval (For Output Code -F or -G)	11
	/KU22	Combined /KF22, /KS21, and Type n (For Output Code -D, -E, or -J)	11
	/NF21	NEPSI Flameproof and Dust Ignition Proof approval (Output Signal code -D, -E, or -J)	10
	/NS21	NEPSI Intrinsically safe Approval (For Output Signal code -D, -E, or -J)	11
	/NS25	NEPSI Intrinsic safety Approval (Output Signal code -F)	11
	/PF22	KOSHA Flameproof Approval (For Output Signal code -D or -J)	10
	/PS21	KOSHA Intrinsically safe Approval (For Output Signal code -D or -J)	11
	/SF22	IECEx flameproof approval (For Output Signal code -D, -J, -F, -G or -Q)	10
	/SS26	IECEx Intrinsically safe Approval (Output Signal code -F and -G)	11
	/SU22	IECEx Intrinsically safe and flameproof (For Output Signal code -D or -J)	11
	/UF1	INMETRO Flameproof Approval (For Output Signal code -D, -E, or -J)	10
	/US1	INMETRO Intrinsically safe Approval (For Output Signal code -D, -E, or - J)	11
	/V1U1	Combination Approval (/KU22, /FU1, and /CU1) (For Output Signal code -D, -E, or -J)	11
003 Optional Features
	/D1	P calibration (psi unit)	21
	/D3	bar calibration (bar unit)	21
	/D4	M calibration (kgf/cm2 unit)	21
004 Optional Features
	/P1	Color change, amplifier cover only Munsell code ; N1.5, black	14
	/P2	Color change, amplifier cover only Munsell code ; 7.5BG4/1.5, jade green	14
	/P7	Color change, amplifier cover only Metallic silver	14
	/PR	Color change, amplifier and terminal covers Munsell code; 7.5 R4/14, Red
005 Optional Features
	/X2	High anti-corrosion coating	15
006 Optional Features
	/A	Lightning protector
007 Optional Features
	/K1	Degrease cleansing treatment	18
	/K5	Degrease cleansing and dehydrating treatment	18
	/K2	Degrease cleansing treatment and with fluorinated oil filled capsule	18
	/K3	Fluorinated oil filled capsule
	/K41	Degrease cleansing treatment and implementation certificate	18
	/K42	Degrease cleansing treatment with fluorinated oil filled capsule, and implementation certificate	18
	/K45	Degrease cleansing and dehydrating treatment, and implementation certificate	18
	/K46	Degrease cleansing and dehydrating treatment with fluorinated oil filled capsule, and implementation certificate	18
	/K6	Degrease cleansing and dehydrating treatment with fluorinated oil filled capsule	18
008 Optional Features
	/U1	Long vent	22
009 Optional Features
	/C1	Output status at CPU failure and hardware error is -5%, 3.2 mA or less.
	/C2	Output signal limits: 3.8 mA to 20.5 mA Output status at CPU failure and hardware error is -5%, 3.2 mA or less.
	/C3	Output signal limits: 3.8 mA to 20.5 mA Output status at CPU failure and hardware error is 110%, 21.6 mA or more.
010 Optional Features
	/CA	Data Configuration for HART communication type (Software damping, Descriptor and Message)	25
	/CB	Data Configuration for BRAIN communication type (Software damping)	25
	/CC	Data Configuration for FOUNFATION Fieldbus communication type (Software damping)	25
	/CD	Data configuration for PROFIBUS PA communication type (Software damping)	25
	/CJ	Data configuration(for HART): Disabling external zero adjustment, Software damping, Descriptor and Message	25
	/CK	Data configuration(for BRAIN): Disables external zero adjustment, Software damping	25
011 Optional Features
	/M01	Material certificate:cover flange	26
	/M11	Material certificate:cover flange, process connector	26
	/MA1	Material certificate: Cover flange, diaphragm, capsule body
	/MC1	Material certificate: Cover flange, process connector, diaphragm, capsule body
	/MG1	Material certificate for wetted parts including cover flange, bolt and nut for cover flange, diaphragm, capsule body, vent and drain plug, vent screw, capsule gasket
	/MH1	Material certificate for wetted parts including cover flange, process connector, bolt and nut for cover flange, bolt for process connector, diaphragm, capsule body, vent and drain plug, vent screw, capsule gasket
012 Optional Features
	/T01	Pressure test/leak test certificate Test pressure:3.5 MPa(500 psi)	26
	/T11	Pressure test/leak test certificate Test pressure:500 kPa(2000 inH2O)	26
	/T12	Pressure test/leak test certificate Test pressure:16 MPa(2300 psi)	26
013 Optional Features
	/N1	Right side high pressure. Without drain and vent plugs.	24
	/N2	Right side high pressure. IEC61518 pro- cess connection with female threads on cover flange, with blind kidney flange on back. Without drain and vent plug.	24
	/N3	Right side high pressure. /N1,/N2 and material certificate for cover flange, diaphragm, capsule body and blind kidney flange.	24
014 Optional Features
	/N4	Stainless steel tag plate wired onto the transmitter	27
016 Optional Features
	/A1	Gold-plated diaphragm	19
	/A2	Gold-plated diaphragm (10 micro meter)	20
017 Optional Features
	/AL	Status output	17
019 Optional Features
	/HAC	High accuracy type Reference accuracy: +/-0.025% of span (Refer to GS for details.)	13
021 Optional Features
	/EE	Software Download
027 Optional Features
	/HC	316 SST exterior parts	16
028 Optional Features
	/GS	Gold-plated capsule gasket Without drain and vent plugs	23
036 Optional Features
	/WCA	American Bureau of Shipping (ABS) Type Approval (For Output Signal code -D or -J)	12
	/WCB	Bureau Veritas Type Approval	12
	/WCD	Det Norske Veritas (DNV) Type Approval (For Output Signal code -D or - J)	12
	/WCL	Lloyd's Register of Shipping Type Approval (For Output Signal code -D or -J)	12
	/WCN	NK(Nippon Kaiji Kyokai) Type approval	12
039 Optional Features
	/YP	Parameter List
046 Optional Features
	/L4	Calibration certificate: Introduction and Yokogawa traceability control system
	/L5	Calibration certificate: Introduction, Yokogawa traceability control system, and primary standards list
	/L6	Calibration certificate: Introduction, Yokogawa traceability control system, primary standards list, and calibration equipments list
	/L9	Calibration certificate: Introduction, Yokogawa traceability control system, primary standards list, calibration equipments list and their test cert.
050 Optional Features
	/BS	Bug screen	29
051 Optional Features
	/PP	An additional blind plug	28

Your Product

Subgroup | Page

Gauge Pressure | Model EJX430A

Model

EJX430A

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted. Refer to the "Ordering Information" section of the GS noted.
How to build MS Code	One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear.

**Product Notes**
Note Id	Description
1	Select this option for 3rd party diaphragm seal attachment.
2	Applicable only for Wetted Parts Material code S.
3	Not applicable for Electrical Connection code 0, 5, 7, or 9.
4	Not applicable for Electrical Connection code 0, 5, 7, 9, or A.
5	Material of blind plug is aluminum alloy.
6	Material of blind plug is 304 SST.
7	Not applicable for Output Signal code -G.
8	Not applicable for Output Signal code -F.
9	Applicable only for Installation code B.
10	Applicable for Electrical Connection code 2, 4, 7, 9, C, or D.
11	Applicable for Electrical Connection code 2, 4, 7, 9, C, or D. Not applicable for Option code /AL.
12	Applicable only for Output Signal code -D, -E, or -J.
13	Applicable to Wetted Parts Material code S or L. Not applicable for Option code /A1, /A2, /K2, /K3, or /K6.
14	Not applicable for Amplifier Housing code 2 or 3.
15	Not applicable for Amplifier Housing code 2. Not applicable for Option code /P1, /P2, or /P7.
16	Material is 316 or 316L SST. This specification is included in Amplifier Housing code 2.
17	Not applicable for Output Signal code -F or -G.
18	Applicable for Wetted Parts Material code S, M, H, or T.
19	Applicable for Wetted Parts Material code S or L.
20	Applicable for Wetted Parts Material code S or L. Not applicable for Option code /FF1, /FS1, /FS15, or /FU1.
21	The unit of MWP on the name plate is the same unit as specified by these option codes. If no code is selected, MWP will be expressed in MPa.
22	Applicable for Installation code 3 or 7; and Wetted Parts. Material code S, M, H, or T.
23	Applicable for Wetted Parts Material code S; Process Connection code 0 or 5; and Installation code 8 or 9. Not applicable for Option code /U1, /N2, /N3, or /M11. No PTFE used for wetted parts.
24	Applicable for Wetted Parts Material code S, M, H, or T; Process Connection code 3, 4, or 5; Installation code 9; and Mounting Bracket code N.
25	Refer to 'Ordering Information' section of appropriate GS.
26	Not applicable for Process Connection code W.
27	Limited to 16 Characters Maximum. Must be special ordered if more digits are required.
28	Not applicable for electrical connection codes 0, 2, and 4.
29	Applicable for process connection codes 0, 1, 2, 3, 4, 5.

EJX430A Gauge Pressure Transmitter (GS 01C25E01-01EN)

01 Output Signal (Please make one selection)

02 Measurement Span (Capsule) (Please make one selection)

03 Wetted Parts Material (Please make one selection)

04 Process Connections (Please make one selection)

05 Bolts and Nuts Material (Please make one selection)

06 Installation (Please make one selection)

07 Amplifier Housing (Please make one selection)

08 Electrical Connection (2 Connectors) (Please make one selection)

09 Integral Indicator (Please make one selection)

10 Mounting Bracket (Please make one selection)

001 Optional Features

003 Optional Features

004 Optional Features

005 Optional Features

006 Optional Features

007 Optional Features

008 Optional Features

009 Optional Features

010 Optional Features

011 Optional Features

012 Optional Features

013 Optional Features

014 Optional Features

016 Optional Features

017 Optional Features

019 Optional Features

021 Optional Features

027 Optional Features

028 Optional Features

036 Optional Features

039 Optional Features

046 Optional Features

050 Optional Features

051 Optional Features

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Output Signal
(Please make one selection)

02 Measurement Span (Capsule)
(Please make one selection)

03 Wetted Parts Material
(Please make one selection)

04 Process Connections
(Please make one selection)

05 Bolts and Nuts Material
(Please make one selection)

06 Installation
(Please make one selection)

07 Amplifier Housing
(Please make one selection)

08 Electrical Connection (2 Connectors)
(Please make one selection)

09 Integral Indicator
(Please make one selection)

10 Mounting Bracket
(Please make one selection)