YCA Store | Products | Transmitters | Wireless Products | EJX210B (Extended Type)

Product Categories

#	Model/Spec/Part No.	Description	Notes
EJX210B Flange Mounted Differential Pressure Transmitter (GS 01C27C01-01EN)			1
01 Output Signal
	-1	Wireless communication (ISA100.11a); successor of code -L
02 Measurement Span (Capsule) (Please make one selection)
	H	20 to 2,000 inH2O
	M	2 to 400 inH2O
03 Low-pressure side Wetted Parts Material
	S	Cover flange: ASTM CF-8M, Capsule: Hastelloy C-276(diaphragm), (F)316L SST(others), Vent plug: 316 SST, Process connector: ASTM CF-8M
04 Low-pressure side Process Connection (Please make one selection)
	0	without process connector (Rc 1/4 female on cover flange)
	1	With Rc1/4 female process connector
	2	With Rc1/2 female process connector
	3	With 1/4NPT female process connector
	4	With 1/2NPT female process connector
	5	Without process connector (1/4 NPT female on cover flange)
05 Cover Flange Bolts and Nuts Material (Please make one selection)
	C	ASTM grade660 stainless steel
	G	316L SST
	J	ASTM-B7M carbon steel
06 Installation
	-9	Horizontal impulse piping type, left side high pressure
07 Amplifier Housing (Please make one selection)
	9	Material: Cast-aluminum alloy for wireless communication type without antenna (N connector)
	7	Material: Cast-aluminum alloy for wireless communication type with integral antenna
	8	Material: Cast-aluminum alloy for wireless communication type with detachable antenna (2 dBi)
08 Electrical Connection
	J	No electrical connection battery powered type(battery case only; battery cells not included)	11
09 Integral Indicator
	D	Digital indicator
10 Specifications
	N	Always N
11 Process Connection Style
	-E	Extended type
12 Flange Rating (Please make one selection)
	A1	ANSI class 150
	A2	ANSI class 300
	D2	DIN PN10/16
	D4	DIN PN25/40
	J1	JIS 10K
	J2	JIS 20K
	P1	JPI class 150
	P2	JPI class 300
13 Flange Size (Please make one selection)
	3	3-inch (80mm)
	4	4-inch (100mm)
14 Flange Material (Please make one selection)
	A	JIS S25C
	B	JIS SUS304
	C	JIS SUS316
15 Gasket Contact Surface (Please make one selection)
	1	Serration	2
	2	Flat (no serration)
16 High-pressure side Wetted Parts Material (Please make one selection)
	SE	Diaphragm: SUS316L Pipe: SUS316 Others: SUS316
	WE	Diaphragm: Hastelloy C-276 Pipe: SUS316 Others: SUS316
17 Flushing Connection Ring
	0	None
18 Extension Length (Please make one selection)
	1	Length (X2) =50mm
	3	Length (X2) =100mm
	5	Length (X2) =150mm
19 Fill Fluid
	-A	for high temperature use (silicone oil) [process temp.]-10 to 250 degC [ambient temp.]-10 to 85 degC
001 Optional Features
	/CS17	CSA intrinsically safe and nonincendive approval
	/FS17	FM intrinsically safe and nonincendive approval
	/KS27	CENELEC ATEX (KEMA) intrinsically safe approval
	/SS27	IECEx Intrinsically safe approval
003 Optional Features
	/D1	P calibration (psi unit)	3
	/D3	bar calibration (bar unit)	3
	/D4	M calibration (kgf/cm2 unit)	3
005 Optional Features
	/X2	High anti-corrosion coating
007 Optional Features
	/K1	Degrease cleansing treatment
	/K5	Degrease cleansing and dehydrating treatment
011 Optional Features
	/M0E	Material certificate: [High] flange, block, pipe, base [Low] cover Flange	5
	/M1E	Material certificate: [High] flange, block, pipe, base [Low] cover Flange, process connector	4
012 Optional Features
	/T51	Pressure test/leak test certificate Test pressure: 2 MPa (290 psi)	8
	/T52	Pressure test/leak test certificate Test pressure: 3 MPa (430 psi)	6
	/T54	Pressure test/leak test certificate Test pressure: 5 MPa (720 psi)	9
	/T55	Pressure test/leak test certificate Test pressure: 7 MPa (1000 psi)	7
016 Optional Features
	/A1	Gold-plated diaphragm

Parts / Accessories

(Multiple selections allowed, creates separate lines on the quote.)

Your Product

Subgroup | Page

Wireless Products | EJX210B (Extended Type)

Model

EJX210B

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted. Refer to the "Ordering Information" section of the GS noted.
How to build MS Code	One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear.
Example MS Code	EJX210B-1MS5G-99JDN-EA13B1WE01-A/FS17/D1 Typically Stocked Model Code: N/A
Wireless Accessories	See ISA100 Wireless Accessory page(s) in this EPB for required antennas, cables, etc.

**Product Notes**
Note Id	Description
1	This product is regulated by international import/export controls. Government authorization by its residence country is required. Contact Customer Service for required documents.
2	Applicable for Flange Rating code A1 or A2.
3	The unit of MWP on the name plate of the housing is the same as specified by Option code /D1, /D3, or /D4. If no code is selected , the unit of MWP will be kPa.
4	Applicable to Process Connection code 1, 2, 3, or 4.
5	Applicable to Process Connection code 0 or 5.
6	Applicable for Flange Rating code A1 or P1.
7	Applicable for Flange Rating code A2 or P2.
8	Applicable for Flange Rating code J1.
9	Applicable for Flange Rating code J2.
10	Order as a separate line item.
11	Batteries sold seperately.

Product Categories

EJX210B Flange Mounted Differential Pressure Transmitter (GS 01C27C01-01EN)

01 Output Signal

02 Measurement Span (Capsule)
(Please make one selection)

03 Low-pressure side Wetted Parts Material

04 Low-pressure side Process Connection
(Please make one selection)

05 Cover Flange Bolts and Nuts Material
(Please make one selection)

06 Installation

07 Amplifier Housing
(Please make one selection)

08 Electrical Connection

09 Integral Indicator

10 Specifications

11 Process Connection Style

12 Flange Rating
(Please make one selection)

13 Flange Size
(Please make one selection)

14 Flange Material
(Please make one selection)

15 Gasket Contact Surface
(Please make one selection)

16 High-pressure side Wetted Parts Material
(Please make one selection)

17 Flushing Connection Ring

18 Extension Length
(Please make one selection)

19 Fill Fluid

001 Optional Features

003 Optional Features

005 Optional Features

007 Optional Features

011 Optional Features

012 Optional Features

016 Optional Features

Parts / Accessories

Certificates (Separate Line Item)

Certified Drawing (Separate Line Item)

Optional Accessories (Order as Separate Line Item)

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

EJX210B Flange Mounted Differential Pressure Transmitter (GS 01C27C01-01EN)

01 Output Signal

02 Measurement Span (Capsule) (Please make one selection)

03 Low-pressure side Wetted Parts Material

04 Low-pressure side Process Connection (Please make one selection)

05 Cover Flange Bolts and Nuts Material (Please make one selection)

06 Installation

07 Amplifier Housing (Please make one selection)

08 Electrical Connection

09 Integral Indicator

10 Specifications

11 Process Connection Style

12 Flange Rating (Please make one selection)

13 Flange Size (Please make one selection)

14 Flange Material (Please make one selection)

15 Gasket Contact Surface (Please make one selection)

16 High-pressure side Wetted Parts Material (Please make one selection)

17 Flushing Connection Ring

18 Extension Length (Please make one selection)

19 Fill Fluid

001 Optional Features

003 Optional Features

005 Optional Features

007 Optional Features

011 Optional Features

012 Optional Features

016 Optional Features

Parts / Accessories

Certificates (Separate Line Item)

Certified Drawing (Separate Line Item)

Optional Accessories (Order as Separate Line Item)

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

02 Measurement Span (Capsule)
(Please make one selection)

04 Low-pressure side Process Connection
(Please make one selection)

05 Cover Flange Bolts and Nuts Material
(Please make one selection)

07 Amplifier Housing
(Please make one selection)

12 Flange Rating
(Please make one selection)

13 Flange Size
(Please make one selection)

14 Flange Material
(Please make one selection)

15 Gasket Contact Surface
(Please make one selection)

16 High-pressure side Wetted Parts Material
(Please make one selection)

18 Extension Length
(Please make one selection)