YCA Store | Products | Transmitters | Wireless Products | EJX118B (Combination Type)

Product Categories

#	Model/Spec/Part No.	Description	Notes
EJX118B Diaphragm Sealed Differential Pressure Transmitter (GS 01C27H01-01EN)			1
01 Output Signal
	-1	Wireless communication (ISA100.11a); successor of code -L
02 Measurement Span (Capsule) (Please make one selection)
	H	40 to 2,000 inH2O
	M	2 to 400 inH2O
03 Specifications
	S	Always S
04 Process Connection
	C	Always C
05 Cover Flange Bolts and Nuts Material (Please make one selection)
	C	ASTM grade660 stainless steel
	G	316L SST
	J	ASTM-B7M carbon steel
06 Installation
	-9	Horizontal impulse piping type, left side high pressure
07 Amplifier Housing (Please make one selection)
	9	Material: Cast-aluminum alloy for wireless communication type without antenna (N connector)
	7	Material: Cast-aluminum alloy for wireless communication type with integral antenna
	8	Material: Cast-aluminum alloy for wireless communication type with detachable antenna (2 dBi)
08 Electrical Connection
	J	No electrical connection battery powered type(battery case only; battery cells not included)	2
09 Integral Indicator
	D	Digital indicator
10 Mounting Bracket (Please make one selection)
	B	304SST 2-inch pipe mounting (flat type)
	N	None
11 Process Connection Style
	-Y	Combination type (Extended and Flush)
12 Flange Rating (Please make one selection)
	A1	ANSI class 150
	A2	ANSI class 300
	D2	DIN PN10/16
	D4	DIN PN25/40
	J1	JIS 10K
	J2	JIS 20K
	P1	JPI class 150
	P2	JPI class 300
13 Process Connection Size (Flange Size)
	W	High pressure side: 4-inch (100mm), Low pressure side: 3-inch (80mm)
14 Flange Material (Please make one selection)
	A	JIS S25C
	B	JIS SUS304
	C	JIS SUS316
15 Gasket Contact Surface (Please make one selection)
	1	Serration	3
	2	Flat (no serration)
16 Wetted Parts Material
	SY	Diaphragm: SUS316L Pipe: SUS316 Others: SUS316
17 Flushing Connection Ring
	0	None
18 Extension Length (Please make one selection)
	1	Length (X2) =50mm
	3	Length (X2) =100mm
	5	Length (X2) =150mm
19 Fill Fluid (Please make one selection)
	-A	for general use (silicone oil) [process temp.]-10 to 250 degC [ambient temp.]-10 to 60 degC
	-B	for general use (silicone oil) [process temp.]-30 to 180 degC [ambient temp.]-15 to 60 degC
	-C	for high temperature use (silicone oil) [process temp.]10 to 310 degC [ambient temp.]10 to 60 degC
	-D	for oil-prohibited use (fluorinated oil) [process temp.]-20 to 120 degC [ambient temp.]-10 to 60 degC
	-E	for low temperature use(ethylene glycol) [process temp.]-50 to 100 degC [ambient temp.]-40 to 60 degC
20 Capillary Connection
	C	High pressure side: Back of Diaphragm seal unit Low pressure side: Side of Diaphragm seal unit
21 Specifications
	2	Always 2
22 Capillary Length (Please make one selection)
	1	1m	4
	2	2m	4
	3	3m	4
	4	4m	4
	5	5m	4
	6	6m	4
	7	7m	4
	8	8m	4
	9	9m	4
	A	10m	4
001 Optional Features
	/CS17	CSA intrinsically safe and nonincendive approval
	/FS17	FM intrinsically safe and nonincendive approval
	/KS27	CENELEC ATEX (KEMA) intrinsically safe approval
	/SS27	IECEx Intrinsically safe approval
003 Optional Features
	/D1	P calibration (psi unit)	5
	/D3	bar calibration (bar unit)	5
	/D4	M calibration (kgf/cm2 unit)	5
005 Optional Features
	/X2	High anti-corrosion coating
007 Optional Features
	/K1	Degrease cleansing treatment
	/K5	Degrease cleansing and dehydrating treatment
011 Optional Features
	/M2Y	Material certificate: [High] flange, block, pipe, base [Low] flange,block
012 Optional Features
	/T51	Pressure test/leak test certificate Test pressure:2 MPa (290 psi)
	/T52	Pressure test/leak test certificate Test pressure:3 MPa (430 psi)
	/T54	Pressure test/leak test certificate Test pressure:5 MPa (720 psi)
	/T55	Pressure test/leak test certificate Test pressure:7 MPa (1000 psi)
016 Optional Features
	/A1	Gold-plated diaphragm
018 Optional Features
	/R	Operating temperature correction
021 Optional Features
	/V	Capillary without PVC sheaths

Parts / Accessories

(Multiple selections allowed, creates separate lines on the quote.)

Certifications (Separate Line Item)
	M1202JHEJXCS17	CSA /CS17 Certificate	6
	M1202JHEJXFS17	Factory Mutual (FM) /FS17 Certificate	6
	M1202JHEJXKS27	CENELEC ATEX (KEMA) /KS27 Certificate	6
	M1202JHEJXSS27	IECEx /SS27 Certificate	6
	M1244YS	DEGREASE CLEAN CERT. OF CONFORMANCE
Certified Drawing (Separate Line Item)
	M1202JHCDEJ001	EJA/EJX 2D Certified Drawing	6
Optional Accessories (Order as Separate Line Item)
	F9915NK	Battery Case ONLY - EJX, YTA, YTMX	6
	F9915NQ	Battery Pack Assembly (Includes Battery Case and two (2) Batteries)	6
	F9915NR	Two(2) Batteries - ISA100 and Sushi Pressure/ Temperature	6

Your Product

Subgroup | Page

Wireless Products | EJX118B (Combination Type)

Model

EJX118B

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted. Refer to the "Ordering Information" section of the GS noted.
How to build MS Code	One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear.
Example MS Code	Typically Stocked Model Code: N/A
Wireless Accessories	See ISA100 Wireless Accessory page(s) in this EPB for required antennas, cables, etc.

**Product Notes**
Note Id	Description
1	This product is regulated by international import/export controls. Government authorization by its residence country is required. Contact Customer Service for required documents.
2	Batteries sold seperately.
3	Applicable to Flange Rating code A1, A2, or A4; and Wetted Parts Material code SW ONLY.
4	Not applicable for Process Connection Size (Flange Size) code 8.
5	Not applicable for Process Connection Size (Flange Size) code 2 or 8
6	Not applicable for Process Connection Size (Flange Size) code 2 or 3.
7	Not applicable for Wetted Parts Material code TW; Not applicable for Process Connection Size code 8; Not applicable for Flushing Connection Ring code 1, 2, 3, or 4.
8	Not applicable for the combination of Process Connection Size (Flange Size) code 2 and Wetted Parts Material code HW, TW, or UW.
9	If a code is not selected from this section, the Maximum Working Pressure will be expressed in KPa on the Name Plate.
10	Applicable for Flushing Connection Ring code 0 ONLY.
11	Applicable for Wetted Parts Material code SW and HW ONLY.
12	Applicable for Flushing Connection Ring code 0
13	Applicable for Flushing Connection Ring code 1, 2, 3, or 4.
14	Order a separate line item.
15	Requires Fill Fluid code -D.
16	Requires Oil-Prohibited Use (Option) code /K1 or /K5.
17	Not applicable for Flushing Connection Ring code 1 or 2.
18	Not applicable for Gasket Contact Surface code 1.
19	1
20	1

EJX118B Diaphragm Sealed Differential Pressure Transmitter (GS 01C27H01-01EN)

01 Output Signal

02 Measurement Span (Capsule) (Please make one selection)

03 Specifications

04 Process Connection

05 Cover Flange Bolts and Nuts Material (Please make one selection)

06 Installation

07 Amplifier Housing (Please make one selection)

08 Electrical Connection

09 Integral Indicator

10 Mounting Bracket (Please make one selection)

11 Process Connection Style

12 Flange Rating (Please make one selection)

13 Process Connection Size (Flange Size)

14 Flange Material (Please make one selection)

15 Gasket Contact Surface (Please make one selection)

16 Wetted Parts Material

17 Flushing Connection Ring

18 Extension Length (Please make one selection)

19 Fill Fluid (Please make one selection)

20 Capillary Connection

21 Specifications

22 Capillary Length (Please make one selection)

001 Optional Features

003 Optional Features

005 Optional Features

007 Optional Features

011 Optional Features

012 Optional Features

016 Optional Features

018 Optional Features

021 Optional Features

Parts / Accessories

Certifications (Separate Line Item)

Certified Drawing (Separate Line Item)

Optional Accessories (Order as Separate Line Item)

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

02 Measurement Span (Capsule)
(Please make one selection)

05 Cover Flange Bolts and Nuts Material
(Please make one selection)

07 Amplifier Housing
(Please make one selection)

10 Mounting Bracket
(Please make one selection)

12 Flange Rating
(Please make one selection)

14 Flange Material
(Please make one selection)

15 Gasket Contact Surface
(Please make one selection)

18 Extension Length
(Please make one selection)

19 Fill Fluid
(Please make one selection)

22 Capillary Length
(Please make one selection)