YCA Store | Products | Transmitters | Wireless Products | EJX110B

Product Categories

#	Model/Spec/Part No.	Description	Notes
EJX110B Differential Pressure Transmitter (GS 01C27B01-01EN)			15
01 Output Signal
	-1	Wireless communication (ISA100.11a); successor of code -L
02 Measurement Span (Capsule) (Please make one selection)
	H	10 to 2,000 inH2O
	M	2 to 400 inH2O
	F	0.4 to 20 inH2O	18
	L	0.4 to 40 inH2O	1, 3
	V	10 to 2,000 psi
03 Wetted Parts Material (Please make one selection)
	S	Cover flange: ASTM CF-8M, Capsule: Hastelloy C-276(diaphragm), (F)316L SST(others), Vent plug: 316 SST, Process connector: ASTM CF-8M	2, 4
	A	Cover flange: Hastelloy C-276 equiv. Capsule: Hastelloy C-276(diaphragm and others) Process connector: Hastelloy C-276 equiv. Vent plug: Hastelloy C-276
	B	Cover flange: Monel equivalent Capsule: Monel(diaphragm and others) Process connector: Monel equivalent vent plug: Monel
	D	Cover flange: Hastelloy C-276 equiv. Capsule: Tantalum(diaphragm and others) Process connector: Hastelloy C-276 equiv. Vent plug: Hastelloy C-276
	H	Cover flange: ASTM CF-8M Capsule: Hatelloy C-276(diaphragm and others) Process connector: ASTM CF-8M Vent plug: 316 SST
	M	Cover flange: ASTM CF-8M Capsule: Monel (diaphragm and others) Process connector: ASTM CF-8M Vent plug: 316 SST
	T	Cover flange: ASTM CF-8M Diaphragm: Tantalum Vent plug: 316 SST Process connector: ASTM CF-8M
04 Process Connections (Please make one selection)
	4	With 1/2NPT female process connector
	0	Without process connector (RC 1/4 female on cover flange)
	1	With Rc1/4 female process connector
	2	With Rc1/2 female process connector
	3	With 1/4NPT female process connector
	5	Without process connector (1/4 NPT female on cover flange)
	W	Assembled with low volume cover flanges for diaphragm seal units with two M12 x 1.25 female threads, and shipped with two new capsule gaskets	2
05 Bolts and Nuts Material (Please make one selection)
	G	316L SST
	C	ASTM grade660 stainless steel
	J	ASTM-B7M carbon steel
06 Installation (Please make one selection)
	-U	Universal flange	3
	-7	Vertical impulse piping type, left side high pressure, process connectors downside
	-8	Horizontal impluse piping type, right side high pressure
	-9	Horizontal impluse piping type, left side high pressure	2
	-B	Bottom process connection type, left side high pressure	17
07 Amplifier Housing (Please make one selection)
	9	Material: Cast-aluminum alloy for wireless communication type without antenna (N connector)
	7	Material: Cast-aluminum alloy for wireless communication type with integral antenna
	8	Material: Cast-aluminum alloy for wireless communication type with detachable antenna (2 dBi)
08 Electrical Connection
	J	No electrical connection battery powered type(battery case only; battery cells not included)	16
09 Integral Indicator
	D	Digital indicator
10 Mounting Bracket (Please make one selection)
	B	304 SST 2-inch pipe mounting(flat type)
	D	304 SST or SCS13A 2-inch pipe mounting (L type)
	K	316 SST or SCS14A 2-inch pipe mounting (L type)
	M	316 SST or SCS14A 2-inch pipe mounting (for bottom process connection)
	N	None
001 Optional Features
	/CS17	CSA intrinsically safe and nonincendive approval	19
	/FS17	FM intrinsically safe and nonincendive approval
	/KS27	CENELEC ATEX (KEMA) intrinsically safe approval	19
	/SS27	IECEx Intrinsically safe approval	19
003 Optional Features
	/D1	P calibration (psi unit)	6
	/D3	bar calibration (bar unit)	6
	/D4	M calibration (kgf/cm2 unit)	6
005 Optional Features
	/X2	High anti-corrosion coating
007 Optional Features
	/K1	Degrease cleansing treatment	5
	/K2	Degrease cleansing treatment and with fluorinated oil filled capsule	5
	/K3	Fluorinated oil filled capsule
	/K5	Degrease cleansing and dehydrating treatment	5
	/K6	Degrease cleansing and dehydrating treatment with fluorinated oil filled capsule	5
008 Optional Features
	/U1	Long vent	7
011 Optional Features
	/M01	Material certificate:cover flange
	/M11	Material certificate:cover flange, process connector
012 Optional Features
	/T12	Pressure test/leak test certificate Test pressure:16 MPa(2300 psi)	12
	/T13	Pressure test/leak test certificate Test pressure:25 MPa(3600 psi)	13
013 Optional Features
	/N1	Right side high pressure. Without drain and vent plugs.	10
	/N2	Right side high pressure. IEC61518 pro- cess connection with female threads on cover flanges, with blind kidney flanges on back. Without drain and vent plugs.	10
	/N3	Right side high pressure. /N1,/N2 and material certificate for cover flange, diaphragm, capsule body and blind kidney flange.	10
017 Optional Features
	/A1	Gold-plated diaphragm	3
023 Optional Features
	/PE3	European Pressure Equipment Directive Category III	11
028 Optional Features
	/GS	Gold-plated capsule gasket Without drain and vent plugs	8, 9
046 Optional Features
	/L4	Calibration certificate: Introduction and Yokogawa traceability control system
	/L5	Calibration certificate: Introduction, Yokogawa traceability control system, and primary standards list
	/L6	Calibration certificate: Introduction, Yokogawa traceability control system, primary standards list, and calibration equipments list
	/L9	Calibration certificate: Introduction, Yokogawa traceability control system, primary standards list, calibration equipments list and their test cert.

Parts / Accessories

(Multiple selections allowed, creates separate lines on the quote.)

Your Product

Subgroup | Page

Wireless Products | EJX110B

Model

EJX110B

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted. Refer to the "Ordering Information" section of the GS noted.
How to build MS Code	One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear.
Example MS Code	EJX110B-1MS4G-97JDB/FS17/D1

**Product Notes**
Note Id	Description
1	Do not use with remote diaphragm seal.
2	Select this code for remote diaphragm seal attachement.
3	Applicable only for Wetted Parts Material code S.
4	Construction materials conform to NACE material recommendations per MR01-75.
5	Applicable for Wetted Parts Material codes S, H, M, or T.
6	The unit of MWP on the name plate of the housing is the same unit as specified by Option code /D1, /D3, or /D4. If no code is selected, the unit of MWP will be kPa.
7	Applicable to Installation code -7 and Wetted Parts Material code S, H, M, or T.
8	Applicable for Wetted Parts Material code S; Process Connection code 0 or 5; and Installation code -8 or -9.
9	Not applicable with Option codes /U1, /N2, /N3, or /M11.
10	Applicable for Wetted Parts Material code S, H, M, or T; Process Connection code 3, 4, or 5; Installation code -9; and Mounting Bracket code N.
11	Applicable for Measurement Span (Capsule) M or H and Wetted Parts Material S.
12	Applicable for Measurement Span (Capsule) code L (All Wetted Parts Material codes) and Measure Span (Capsule) code M, H, or V with Wetted Parts Material code H, A, M, B, T, or D.
13	Applicable for Measurement Span (Capsule) code M, H, or V with Wetted Parts Material code S.
14	Order as a seperate line item.
15	This product is regulated by international import/export controls. Government authorization by its residence country is required. Contact Customer Service for required documents.
16	Batteries sold seperately.
17	Applicable for Wetted Part Material code S; Not applicable for Measurement Span F.
19	Applicable for Amplifier Housing code 7 only.
20	High gain antenna must be connected to the the transmitter by using remote antenna cables.

Product Categories

EJX110B Differential Pressure Transmitter (GS 01C27B01-01EN)

01 Output Signal

02 Measurement Span (Capsule)
(Please make one selection)

03 Wetted Parts Material
(Please make one selection)

04 Process Connections
(Please make one selection)

05 Bolts and Nuts Material
(Please make one selection)

06 Installation
(Please make one selection)

07 Amplifier Housing
(Please make one selection)

08 Electrical Connection

09 Integral Indicator

10 Mounting Bracket
(Please make one selection)

001 Optional Features

003 Optional Features

005 Optional Features

007 Optional Features

008 Optional Features

011 Optional Features

012 Optional Features

013 Optional Features

017 Optional Features

023 Optional Features

028 Optional Features

046 Optional Features

Parts / Accessories

Certificates (Separate Line Item)

Certified Drawings (Separate Line Item)

Optional Accessories (Order as Separate Line Item)

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

EJX110B Differential Pressure Transmitter (GS 01C27B01-01EN)

01 Output Signal

02 Measurement Span (Capsule) (Please make one selection)

03 Wetted Parts Material (Please make one selection)

04 Process Connections (Please make one selection)

05 Bolts and Nuts Material (Please make one selection)

06 Installation (Please make one selection)

07 Amplifier Housing (Please make one selection)

08 Electrical Connection

09 Integral Indicator

10 Mounting Bracket (Please make one selection)

001 Optional Features

003 Optional Features

005 Optional Features

007 Optional Features

008 Optional Features

011 Optional Features

012 Optional Features

013 Optional Features

017 Optional Features

023 Optional Features

028 Optional Features

046 Optional Features

Parts / Accessories

Certificates (Separate Line Item)

Certified Drawings (Separate Line Item)

Optional Accessories (Order as Separate Line Item)

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

02 Measurement Span (Capsule)
(Please make one selection)

03 Wetted Parts Material
(Please make one selection)

04 Process Connections
(Please make one selection)

05 Bolts and Nuts Material
(Please make one selection)

06 Installation
(Please make one selection)

07 Amplifier Housing
(Please make one selection)

10 Mounting Bracket
(Please make one selection)