YCA Store | Products | Transmitters | DSS | Model EJAC80E

Product Categories

#	Model/Spec/Part No.	Description
EJAC80E Diaphragm Seal System
01 Measurement Type (Please make one selection)
	-D	Differential pressure
	-G	Gauge pressure
02 High Pressure Side Style (Please make one selection)
	0	None
	2	Direct mount flanged diaphragm seal
	8	Remote mount flanged diaphragm seal
03 Low Pressure Side Style (Please make one selection)
	0	None
	8	Remote mount flanged diaphragm seal
04 Measurement Span (Please make one selection)
	A	0.06 to 3.5 MPa(8.6 to 500 psi)
	B	0.46 to 16 MPa(67 to 2300 psi) URL:7 MPa(Extended type) Range is within the flange rating
	H	Remote seal:25 to 500 kPa (100 to 2000 inH2O) Direct mount:5 to 500 kPa (20 to 2000 inH2O)
	M	Remote seal:2.5 to 100 kPa (10 to 400 inH2O) Direct mount:1 to 100 kPa (4 to 400 inH2O)
	V	Remote seal:0.28 to 14 MPa Direct mount:0.14 to 14 MPa URL:7 MPa(Extended type) Range is within the flange rating
05 Process Connection High-si (Please make one selection)
	3	With 1/4NPT female process connector
	4	With 1/2NPT female process connector
	E	Extended type
	N	None
	W	Flush type
	1	With Rc1/4 female process connector
	2	With Rc1/2 female process connector
06 Wetted parts High-side (Please make one selection)
	C	SCS14A(SUS316 equiv.) for process connector
	H	Diaphragm: Hastelloy C-276 equivalent
	S	Diaphragm:SUS316L
	J	Diaphragm: Hastelloy C-276 equivalent, thickness 0.006inch (0.15mm)
	K	Diaphragm:Nickel
	M	Diaphragm:Monel equivalent
	N	None
	T	Diaphragm:Tantalum
	U	Diaphragm:Titanium
	V	Diaphragm:SUS316L SST thickness 0.005inch (0.14mm)
07 Process Connection Low-side (Please make one selection)
	3	With 1/4NPT female process connector
	4	With 1/2NPT female process connector
	E	Extended type
	N	None (L-side)
	W	Flush type
	1	With Rc1/4 female process connector
	2	With Rc1/2 female process connector
08 Wetted Parts L-side (Please make one selection)
	C	SCS14A(SUS316 equiv.) for Process connector
	H	Diaphragm: Hastelloy C-276 equivalent
	S	Diaphragm:SUS316L
	J	Diaphragm: Hastelloy C-276 equivalent, thickness 0.006inch (0.15mm)
	K	Diaphragm:Nickel
	M	Diaphragm:Monel equivalent
	N	None
	T	Diaphragm:Tantalum
	U	Diaphragm:Titanium
	V	Diaphragm:SUS316L thickness 0.005inch (0.14mm)
09 Fill Fluid (Please make one selection)
	A	for general use (silicone oil)
	B	for general use (silicone oil)
	D	for oil-prohibited use (fluorinated oil)
	1	for high temperature and high vacuum use (silicone oil)
	2	for high temperature and high vacuum use (silicone oil)
	4	for high vacuum use (silicone oil)
	E	for low temperature use (ethylene glycol)
	F	for low temperature use (silicone oil)
	P	Propylene glycol [process temp.]-10 to 120 degC [ambient temp.]-10 to 60 degC
10 Accessory High-side (Please make one selection)
	-1	Flushing Connection Ring for diaphragm seal
	-C	Bolts:ASTM grade660 SST for process connector
	-G	Bolts:SUS316L for process connector
	-J	Bolts:ASTM-B7 carbon steel for process connector
	-N	None
11 Accessory Low-side (Please make one selection)
	1	Flushing Connection Ring for diaphragm seal
	C	Bolts:ASTM grade660 SST for process connector
	G	Bolts:SUS316L for process connector
	J	Bolts:ASTM-B7 carbon steel for process connector
	N	None
007 Optional Features
	/K21	Degrease cleansing treatment
	/K25	Degrease cleansing and dehydrating treatment
	/K81	Degrease cleansing treatment and implementation certificate
	/K85	Degrease cleansing and dehydrating treatment, and implementation certificate
008 Optional Features
	/R	Operating temperature correction
011 Optional Features
	/M1C	Material certificate: [Low] process connector
	/M2C	Material certificate: [High] process connector
	/M7C	Material certificate: [Low] process connector, bolt
	/M8C	Material certificate: [High] process connector, bolt
012 Optional Features
	/T52	Pressure test/leak test certificate Test pressure:3 MPa (430 psi)
	/T53	Pressure test/leak test certificate Test pressure:3.5 MPa (500 psi)
	/T55	Pressure test/leak test certificate Test pressure:7 MPa (1000 psi)
	/T56	Pressure test/leak test certificate Test pressure:8 MPa (1160 psi)
	/T58	Pressure test/leak test certificate Test pressure:16 MPa (2300 psi)
	/T51	Pressure test/leak test certificate Test pressure:2 MPa (290 psi)
	/T54	Pressure test/leak test certificate Test pressure:5 MPa (720 psi)
	/T57	Pressure test/leak test certificate Test pressure:10 MPa (1450 psi)
013 Optional Features
	/JH03	10 minutes retention time of pressure and leak test
046 Optional Features
	/L4	Calibration certificate: Introduction and Yokogawa traceability control system
	/L5	Calibration certificate: Introduction, Yokogawa traceability control system, and primary standards list
	/L6	Calibration certificate: Introduction, Yokogawa traceability control system, primary standards list, and calibration equipments list
	/L9	Calibration certificate: Introduction, Yokogawa traceability control system, primary standards list, calibration equipments list and their test cert.

Your Product

Subgroup | Page

DSS | Model EJAC80E

Model

EJAC80E

Configuration

Parts/Accessories (separate line)

View Cart

**Reference Links**
Link
Specification Selection System (SSS) Software

EJAC80E Diaphragm Seal System

01 Measurement Type (Please make one selection)

02 High Pressure Side Style (Please make one selection)

03 Low Pressure Side Style (Please make one selection)

04 Measurement Span (Please make one selection)

05 Process Connection High-si (Please make one selection)

06 Wetted parts High-side (Please make one selection)

07 Process Connection Low-side (Please make one selection)

08 Wetted Parts L-side (Please make one selection)

09 Fill Fluid (Please make one selection)

10 Accessory High-side (Please make one selection)

11 Accessory Low-side (Please make one selection)

007 Optional Features

008 Optional Features

011 Optional Features

012 Optional Features

013 Optional Features

046 Optional Features

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Measurement Type
(Please make one selection)

02 High Pressure Side Style
(Please make one selection)

03 Low Pressure Side Style
(Please make one selection)

04 Measurement Span
(Please make one selection)

05 Process Connection High-si
(Please make one selection)

06 Wetted parts High-side
(Please make one selection)

07 Process Connection Low-side
(Please make one selection)

08 Wetted Parts L-side
(Please make one selection)

09 Fill Fluid
(Please make one selection)

10 Accessory High-side
(Please make one selection)

11 Accessory Low-side
(Please make one selection)