YCA Store | Products | Transmitters | DSS | Model EJA430E

Product Categories

#	Model/Spec/Part No.	Description	Notes
EJA430E Gauge Pressure Transmitter (GS 01C31E01-01EN)
01 Output Signal (Please make one selection)
	-D	4 to 20 mA DC with digital communicaiton (BRAIN protocol)
	-F	Digital communication (FOUNDATION Fieldbus protocol)
	-G	Digital communication (PROFIBUS PA protocol)
	-J	4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
	-Q	Low power, 1 to 5 V DC with digital communication (HART 7 protocol)
02 Measurement Span (Capsule) (Please make one selection)
	A	0.03 to 3.5 MPa (4.3 to 500 psi) (0.3 to 35 bar)(0.3 to 35 kgf/cm2)
	B	0.14 to 16 MPa (20 to 2300 psi) (1.4 to 160 bar)(1.4 to 160 kgf/cm2)
03 Wetted Parts Material
	S	Cover flange: ASTM CF-8M, Capsule: Hastelloy C-276(diaphragm), (F)316L SST(others), Vent plug: 316 SST, Process connector: ASTM CF-8M
04 Process Connections (Please make one selection)
	B	Diaphragm seal system
	G	Diaphragm seal system for vacuum service
05 Bolts and Nuts Material (Please make one selection)
	C	ASTM grade660 stainless steel
	G	316L SST
	J	ASTM-B7 carbon steel
06 Installation
	-9	Horizontal impulse piping type, left side high pressure
07 Amplifier Housing (Please make one selection)
	1	Material:Cast-aluminum alloy
	2	Material: ASTM CF-8M
	3	Material: Cast aluminum alloy with corrosion resistance properties
08 Electrical Connection (Please make one selection)
	2	1/2 NPT female, two electrical connections without blind plugs
	4	M20 female, two electrical connections without blind plugs
	7	1/2 NPT female, two electrical connections with a blind plug
	9	M20 female, two electrical connections with a blind plug
	C	1/2 NPT female, two electrical connections with a 316 SST blind plug
	D	M20 female, two electrical connections with a 316 SST blind plug
	0	G 1/2 female, one electrical connection without blind plugs
	5	G1/2 female, two electrical connections with a blind plug
	A	G 1/2 female, two electrical connections with a 316 SST blind plug
09 Integral Indicator (Please make one selection)
	D	Digital indicator
	E	Digital indicator with a range setting switch
	N	None
10 Mounting Bracket (Please make one selection)
	B	304 SST 2-inch pipe mounting(flat type)
	J	316 SST 2-inch pipe mounting(flat type)
	N	None
001 Optional Features
	/CF1	CSA Explosionproof Approval (For Output Signal code -D, -J, -F, -G or -Q)
	/CS1	CSA Intrinsically Safe Approval (For Output Signal code -D or -J)
	/CS15	CSA Intrinsically Safe Approval (For Output Signal Code -F)
	/CU1	Combined /CF1 and /CS1 (For Output Signal code -D or -J)
	/FF1	FM Explosion proof Approval (For Output Signal code -D,-J,-F, -G or -Q)
	/FS1	FM Intrinsically Safe Approval (For Output Signal code -D or -J)
	/FS15	FM Intrinsically Safe and Nonincendive Approval (For Output Signal code -F)
	/FU1	Combined /FF1 and /FS1 (For Output Signal code -D or -J)
	/KF22	ATEX Flameproof Approval (For Output Signal code -D, -J, -F, or -G)
	/KN26	ATEX Intrinsically Safe Approval (Ex ic) (For Output Signal Code -F or -G)
	/KS21	ATEX Intrinsically Safe Approval (For Output Signal code -D or -J)
	/KS26	ATEX Intrinsically Safe Approval (For Output Signal Code -F or -G)
	/KU22	Combined /KF22, /KS21, and Ex ic (For Output Signal code -D or -J)
	/SS26	IECEx Intrinsically safe Approval (For Output Signal code -F or -G)
	/NF21	NEPSI Flameproof Approval (For Output Signal code -D or -J)
	/NS21	NEPSI Intrinsically safe Approval (For Output Signal code -D or -J)
	/NS25	NEPSI Intrinsic Safety Approval (For Output Signal code -F or -G)
	/PF22	KOSHA Flameproof Approval (For Output Signal code -D or -J)
	/PF23	Korea Flameproof and Dust Ignition Proof
	/PS21	KOSHA Intrinsically safe Approval (For Output Signal code -D or -J)
	/SF22	IECEx flameproof approval (For Output Signal code -D, -J, -F, -G or -Q)
	/SU22	IECEx Intrinsically safe and flameproof (For Output Signal code -D or -J)
	/UF1	INMETRO Flameproof Approval For Output Signal code -D or -J)
	/US1	INMETRO Intrinsically safe Approval (For Output Signal code -D or -J)
003 Optional Features
	/D1	P calibration (psi unit)
	/D3	bar calibration (bar unit)
	/D4	M calibration (kgf/cm2 unit)
004 Optional Features
	/PR	Color change, amplifier and terminal covers Munsell code; 7.5 R4/14, Red
	/P1	Color change, amplifier cover only Munsell code; N1.5, black
	/P2	Color change, amplifier cover only Munsell code; 7.5BG4/1.5, jade green
	/P7	Color change, amplifier cover only Metallic silver
005 Optional Features
	/X2	High anti-corrosion coating
006 Optional Features
	/A	Lightning protector
007 Optional Features
	/K13	Fluorinated oil filled capsule
009 Optional Features
	/C1	Failure alarm down-scale
	/C2	NAMUR NE43 Compliant Output signal limits; Failure alarm down-scale
	/C3	NAMUR NE43 Compliant Output signal limits; Failure alarm up-scale
010 Optional Features
	/CA	Data Configuration for HART communication type (Software damping, Descriptor and Message)
	/CB	Data Configuration for BRAIN communication type (Software damping)
	/CC	Data Configuration for FOUNFATION Fieldbus communication type (Software damping)
	/CD	Data configuration for PROFIBUS PA communication type (Software damping)
011 Optional Features
	/M51	Material certificate: bolt and nut for cover flange
014 Optional Features
	/N4	Stainless steel tag plate wired onto the transmitter	1
029 Optional Features
	/JH01	5 point calibration at 0, 25, 50, 75, and 100% (Output mode linear only)

Your Product

Subgroup | Page

DSS | Model EJA430E

Model

EJA430E

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted. Refer to the "Ordering Information" section of the GS noted.
How to build MS Code	One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear. The Specification Selection System (SSS) software can be utilized to build accurate model numbers and ensure proper selection based on application requirements.
Example MS Code	EJA430E-JASBG-912DN/FF1/M51/N4
How to determine lead-time	Options marked with the >> marker have a standard lead-time of 10 business days after receipt of order. All codes in the model must contain the >> marker in order to be eligible. Contact customer support for lead-time on all other models.

**Product Notes**
Note Id	Description
1	Limited to 16 Characters Maximum. Must be special ordered if more digits are required.

**Reference Links**
Link
Specification Selection System (SSS) Software

EJA430E Gauge Pressure Transmitter (GS 01C31E01-01EN)

01 Output Signal (Please make one selection)

02 Measurement Span (Capsule) (Please make one selection)

03 Wetted Parts Material

04 Process Connections (Please make one selection)

05 Bolts and Nuts Material (Please make one selection)

06 Installation

07 Amplifier Housing (Please make one selection)

08 Electrical Connection (Please make one selection)

09 Integral Indicator (Please make one selection)

10 Mounting Bracket (Please make one selection)

001 Optional Features

003 Optional Features

004 Optional Features

005 Optional Features

006 Optional Features

007 Optional Features

009 Optional Features

010 Optional Features

011 Optional Features

014 Optional Features

029 Optional Features

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Output Signal
(Please make one selection)

02 Measurement Span (Capsule)
(Please make one selection)

04 Process Connections
(Please make one selection)

05 Bolts and Nuts Material
(Please make one selection)

07 Amplifier Housing
(Please make one selection)

08 Electrical Connection
(Please make one selection)

09 Integral Indicator
(Please make one selection)

10 Mounting Bracket
(Please make one selection)