YCA Store | Products | Transmitters | Draft Range | Model EJA120E

Product Categories

#	Model/Spec/Part No.	Description	Notes
EJA120E Differential Pressure Transmitter (GS 01C31B03-01EN)
01 Output Signal (Please make one selection)
	-D	4 to 20 mA DC with digital communication (BRAIN protocol)
	-F	Digital communication (FOUNDATION Fieldbus protocol)
	-G	Digital communication (PROFIBUS PA protocol)
	-J	4 to 20 mA DC with digital communication (HART 5/HART 7 protocol)
	-Q	Low power, 1 to 5 V DC with digital communication (HART 7 protocol)
02 Measurement Span (Capsule)
	E	0.1to 1kPa (10 to 100mmH2O) (0.4 to 4 inH2O)(1 to 10mbar)
03 Wetted Parts Material
	S	Cover flange: ASTM CF-8M, Capsule: Hastelloy C-276(diaphragm), (F)316L SST(others), Vent plug: 316 SST, Process connector: ASTM CF-8M
04 Low-pressure side Process Connection (Please make one selection)
	0	Without process connector (RC 1/4 female on cover flange)
	1	With Rc1/4 female process connector
	2	With Rc1/2 female process connector
	3	With 1/4NPT female process connector
	4	With 1/2NPT female process connector
	5	Without process connector (1/4 NPT female on cover flange)
05 Cover Flange Bolts and Nuts Material (Please make one selection)
	C	ASTM grade660 stainless steel
	G	316L SST
	J	ASTM-B7 carbon steel
06 Installation (Please make one selection)
	-7	Vertical impulse piping type, left side high pressure, process connectors downside
	-8	Horizontal impulse piping type, right side high pressure
	-9	Horizontal impulse piping type, left side high pressure
	-U	Universal flange
07 Amplifier Housing (Please make one selection)
	1	Material: Cast-aluminum alloy
	2	Material: ASTM CF-8M	2
	3	Material: Cast aluminum alloy with corrosion resistance properties	1
08 Electrical Connection (Please make one selection)
	0	G 1/2 female, one electrical connection, without blind plugs
	2	1/2 NPT female, two electrical connections, without blind plugs
	4	M20 female, two electrical connections without blind plugs
	5	G 1/2 female, two electrical connections with a blind plug	3
	7	1/2 NPT female, two electrical connections with a blind plug	4
	9	M20 female, two electrical connections G 1/2 female, two electrical connections	3
	A	G 1/2 female, two electrical connections with a 316 SST blind plug
	C	1/2 NPT female, two electrical connections with a 316 SST blind plug
	D	M20 female, two electrical connectionswi with a 316 SST blind plug
09 Integral Indicator (Please make one selection)
	D	Digital indicator	5
	E	Digital indicator with a range setting switch	6
	N	None
10 Mounting Bracket (Please make one selection)
	B	304 SST 2-inch pipe mounting(flat type)
	D	304 SST or SCS13A 2-inch pipe mounting(L type)
	J	316 SST 2-inch pipe mounting(flat type)
	K	316 SST or SCS14A 2-inch pipe mounting(L type)
	N	None
	P	Position adjustable bracket for vertical piping installation, SUS316, 2-inch pipe mounting(L type)
001 Optional Features
	/CF1	CSA Explosionproof Approval (For Output Signal code -D, -J, -F, -G or -Q)	7
	/CS1	CSA Intrinsically Safe Approval (For Output Signal code -D or -J)	7
	/CS15	CSA Intrinsically Safe Approval (For Output Signal Code -F)	7
	/CU1	Combined /CF1 and /CS1 (For Output Signal code -D or -J)	7
	/FF1	FM Explosion proof Approval (For Output Signal code -D,-J,-F, -G or -Q)	7
	/FS1	FM Intrinsically Safe Approval (For Output Signal code -D or -J)	7
	/FS15	FM Intrinsically Safe and Nonincendive Approval (For Output Signal code -F)	7
	/FU1	Combined /FF1 and /FS1 (For Output Signal code -D or -J)	7
	/KF22	ATEX Flameproof Approval (For Output Signal code -D, -J, -F, or -G)	7
	/KN26	ATEX Intrinsically Safe Approval (Ex ic) (For Output Signal Code -F or -G)	7
	/KS21	ATEX Intrinsically Safe Approval (For Output Signal code -D or -J)	7
	/KS26	ATEX Intrinsically Safe Approval (For Output Signal Code -F or -G)	7
	/KU22	Combined /KF22, /KS21, and Ex ic (For Output Signal code -D or -J)	7
	/NF21	NEPSI Flameproof Approval (For Output Signal code -D or -J)	7
	/NS21	NEPSI Intrinsically safe Approval (For Output Signal code -D or -J)	7
	/NS25	NEPSI Intrinsic Safety Approval (For Output Signal code -F or -G)	7
	/PF22	KOSHA Flameproof Approval (For Output Signal code -D or -J)	7
	/PS21	KOSHA Intrinsically safe Approval (For Output Signal code -D or -J)	7
	/SF22	IECEx flameproof approval (For Output Signal code -D, -J, -F, -G or -Q)	7
	/SS26	IECEx Intrinsically safe Approval (For Output Signal code -F or -G)	7
	/SU22	IECEx Intrinsically safe and flameproof (For Output Signal code -D or -J)	7
	/UF1	INMETRO Flameproof Approval For Output Signal code -D or -J)	7
	/US1	INMETRO Intrinsically safe Approval (For Output Signal code -D or -J)	7
003 Optional Features
	/D1	P calibration (psi unit)
	/D3	bar calibration (bar unit)
	/D4	M calibration (kgf/cm2 unit)
004 Optional Features
	/P1	Color change, amplifier cover only Munsell code; N1.5, black	9
	/P2	Color change, amplifier cover only Munsell code; 7.5BG4/1.5, jade green	9
	/P7	Color change, amplifier cover only Metallic silver	9
	/PR	Color change, amplifier and terminal covers Munsell code ; 7.5 R4/14, Red
005 Optional Features
	/X2	High anti-corrosion coating
006 Optional Features
	/A	Lightning protector
007 Optional Features
	/K1	Degrease cleansing treatment
	/K41	Degrease cleansing treatment and implementation certificate	17
	/K45	Degrease cleansing and dehydrating treatment, and implementation certificate	17
	/K5	Degrease cleansing and dehydrating treatment
008 Optional Features
	/U1	Long vent	10
009 Optional Features
	/C1	Failure alarm down-scale
	/C2	NAMUR NE43 Compliant Output signal limits; Failure alarm down-scale
	/C3	NAMUR NE43 Compliant Output signal limits; Failure alarm up-scale
010 Optional Features
	/CA	Data Configuration for HART communication type (Software damping,Descriptor and Message)	14
	/CB	Data Configuration for BRAIN communication type (Software damping)	14
	/CC	Data Configuration for FOUNDATION Fieldbus communication type (Software damping)	14
	/CD	Data configuration for PROFIBUS PA communication type (Software damping)	14
	/CJ	Data configuration(for HART): Disabling external zero adjustment, Software damping, Descriptor and Message	14
	/CK	Data configuration(for BRAIN): Disables external zero adjustment, Software damping	14
011 Optional Features
	/M01	Material certificate:cover flange	12
	/M11	Material certificate:cover flange, process connector	13
	/MA1	Material certificate: Cover flange, diaphragm, capsule body
	/MC1	Material certificate: Cover flange, process connector, diaphragm, capsule body
	/MG1	Material certificate for wetted parts including cover flange, bolt and nut for cover flange, diaphragm, capsule body, vent and drain plug, vent screw, capsule gasket
	/MH1	Material certificate for wetted parts including cover flange, process connector, bolt and nut for cover flange, bolt for process connector, diaphragm, capsule body, vent and drain plug, vent screw, capsule gasket
012 Optional Features
	/T04	Pressure test/leak test certificate Test pressure:50 kPa(7.25 psi)
013 Optional Features
	/N1	Right side high pressure. Without drain and vent plugs.	11
	/N2	Right side high pressure. IEC61518 pro- cess connection with female threads on cover flanges, with blind kidney flanges on back. Without drain and vent plugs.	11
	/N3	Right side high pressure. /N1,/N2 and material certificate for cover flange, diaphragm, capsule body and blind kidney flange.	11
014 Optional Features
	/N4	Stainless steel tag plate wired onto the transmitter	16
019 Optional Features
	/HAC	High accuracy type	8
021 Optional Features
	/EE	Software Download function
027 Optional Features
	/HC	316 SST exterior parts
036 Optional Features
	/WCA	American Bureau of Shipping (ABS) Type Approval (For Output Signal code -D or -J)
	/WCB	Bureau Veritas Type Approval (For Output Signal code -D or -J)
	/WCD	Det Norske Veritas (DNV) Type Approval (For Output Signal code -D or - J)
	/WCL	Lloyd's Register of Shipping Type Approval (For Output Signal code -D or -J)
	/WCN	Nippon Kaiji Kyokai (NK) Type Approval (For Output Signal code -D or -J)
039 Optional Features
	/YP	Parameter List
046 Optional Features
	/L4	Calibration certificate: Introduction and Yokogawa traceability control system
	/L5	Calibration certificate: Introduction, Yokogawa traceability control system, and primary standards list
	/L6	Calibration certificate: Introduction, Yokogawa traceability control system, primary standards list, and calibration equipments list
	/L9	Calibration certificate: Introduction, Yokogawa traceability control system, primary standards list, calibration equipments list and their test cert.
050 Optional Features
	/BS	Bug screen
051 Optional Features
	/PP	An additional blind plug	18

Your Product

Subgroup | Page

Draft Range | Model EJA120E

Model

EJA120E

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted. Refer to the "Ordering Information" section of the GS noted.
How to build MS Code	One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear.
Example MS Code	EJA120E-JES4G-912EN/FF1/D1

**Product Notes**
Note Id	Description
1	Not applicable to Electrical Connection code 0, 5, 7, 9, or A.
2	Not applicable to Electrical Connection code 0, 5, 7 or 9.
3	Material of blind plug is aluminum alloy.
4	Material of blind plug is 304 SST.
5	Not applicable for Output Signal code -G.
6	Not applicable for Output Signal code -F.
7	Applicable for Electrical Connection code 2, 4, 7, 9, C, or D.
8	Not applicable for Output Signal code -Q.
9	Not applicable with Amplifier Housing code 2 or 3.
10	Applicable to Installation code 7.
11	Applicable for Process Connection code 3, 4, or 5; Installation code 9, and Mounting Bracket code N.
12	Applicable for Process Connections code 0 or 5.
13	Applicable for Process Connection code 1, 2, 3, or 4.
14	Refer to the indicated GS for information.
15	Tokuchu approval is required before an order for this option can be accepted.
16	Limited to 16 Characters Maximum. Must be special ordered if more digits are required.
17	Applicable for Wetted parts material code S.
18	Not applicable for electrical connection codes 0, 2, and 4.

EJA120E Differential Pressure Transmitter (GS 01C31B03-01EN)

01 Output Signal (Please make one selection)

02 Measurement Span (Capsule)

03 Wetted Parts Material

04 Low-pressure side Process Connection (Please make one selection)

05 Cover Flange Bolts and Nuts Material (Please make one selection)

06 Installation (Please make one selection)

07 Amplifier Housing (Please make one selection)

08 Electrical Connection (Please make one selection)

09 Integral Indicator (Please make one selection)

10 Mounting Bracket (Please make one selection)

001 Optional Features

003 Optional Features

004 Optional Features

005 Optional Features

006 Optional Features

007 Optional Features

008 Optional Features

009 Optional Features

010 Optional Features

011 Optional Features

012 Optional Features

013 Optional Features

014 Optional Features

019 Optional Features

021 Optional Features

027 Optional Features

036 Optional Features

039 Optional Features

046 Optional Features

050 Optional Features

051 Optional Features

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Output Signal
(Please make one selection)

04 Low-pressure side Process Connection
(Please make one selection)

05 Cover Flange Bolts and Nuts Material
(Please make one selection)

06 Installation
(Please make one selection)

07 Amplifier Housing
(Please make one selection)

08 Electrical Connection
(Please make one selection)

09 Integral Indicator
(Please make one selection)

10 Mounting Bracket
(Please make one selection)