YCA Store | Products | Flowmeters | YEWFLO | digitalYEWFLO

Product Categories

#	Model/Spec/Part No.	Description	Notes
DY150 6 Inch ID			1
01 Amp (Please make one selection)
	-D	4 to 20mA DC, Pulse, BRAIN Communication
	-E	4 to 20mA DC, Pulse, HART 5 Communication
	-J	4 to 20mA DC, Pulse, HART 7 Communication
	-N	Remote Type Detector
02 Body Material
	W	CARBON STEEL
03 Shedder Material
	X	Others
04 Process Connection (Please make one selection)
	BA1	ANSI 150 Flange type (Raised Face)
	BA2	ANSI 300 Flange type (Raised Face)
	BA4	ANSI 600 Flange type (Raised Face)
	BA5	ANSI 900 Flange type (Raised Face)
	CA5	ANSI 900 Flange type (Ring Joint)
05 Electrical Connection
	-2	ANSI 1/2NPT Female
06 Indicator (Please make one selection)
	D	With Indicator
	N	None Indicator
001-003 Optional Features
	/HT	High Process Temperature Version
001-003 Optional Features
	/L2	Calibration Certificate, Level 2 Declaration and Calibration Equipment List
001-003 Optional Features
	/X1	Epoxy Coating
004A Certification
	/CF1	CSA Explosion proof
	/CF11	CSA Explosion proof : DUAL SEAL
	/CS1	CSA Intrinsically Safe Ex ia IIC T4...T1 and Ex nC IIC T4...T1 (Integral) Ex ia IIC T4 and Ex nC IIC T4 (Remote)
	/CS11	CSA Intrinsically Safe: DUAL SEAL Ex ia IIC T4...T1 and Ex nC IIC T4...T1 (Integral) Ex ia IIC T4 and Ex nC IIC T4 (Remote)
	/FF1	FM Explosion proof
	/FS1	FM Intrinsically Safe / Nonincendive
005-030 Optional Features
	/A	Lightning Protector
005-030 Optional Features
	/CRC	Converter Installing Direction 180 deg. Change
005-030 Optional Features
	/E01	Material Certificate(3.1B)(body)
	/E02	Material Certificate(3.1B)(body/shedder)
	/E03	Material Certificate(3.1B)(body/shedder bottom plug)
	/E04	Material Certificate(3.1B)(body/shedder/ bottom plug/welding rod)
005-030 Optional Features
	/K1	Degrease Treatment
005-030 Optional Features
	/M01	Material Certificate
005-030 Optional Features
	/M02	Material Certificate(Mill sheet) (Body/Shedder)
	/M03	Material Certificate(Mill sheet) (Body/Shedder/Bottom plug)
	/M04	Material Certificate(Mill sheet) (Body/Shedder/Bottom plug/Welding rod)
005-030 Optional Features
	/MV	Multi-Variable (built-in temperature sensor) type
005-030 Optional Features
	/PM1	PMI test certificate(Body)
	/PM2	PMI test certificate(Body/Shedder)
005-030 Optional Features
	/PT	Dye Penetrant test certificate (Welded portion for the bottom plug and the flange)
005-030 Optional Features
	/SCT	Stainless Steel Tag Plate
005-030 Optional Features
	/T01	Static Pressure and Leakage Test Certificate
005-030 Optional Features
	/T02	Hydrostatic pressure test certificate
005-030 Optional Features
	/WP	WQ,WPS,PQR(Welded portion for the bottom plug and flange)
005-030 Optional Features
	/X2	Pilling up coating to keep off corrosion

Your Product

Subgroup | Page

YEWFLO | digitalYEWFLO

Model

DY150

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	MODEL NUMBER: specify the Model Number by choosing one code from each section, multiple codes can be chosen from the "Options" section. OPTIONS: Must be listed in the sequence shown in the options section.
How to build MS Code	Specify the Model Number by choosing one code from each section, multiple codes can be chosen from the "Options" Section"
Example MS Code	DY080-DWXBA1-2D/FF1/HY/SCT is a 3.0" 150# flanged style meter, Carbon Body and HC shedder bar, integral electronics with display and BRAIN
Pricing	Total the amount shown to arrive at a list price.
Delivery	Please Consult Your Order Analyst for Delivery
Documents	The programming/parameter sheet produced by the Digital YEWFLO. Sizing Program MUST be included with your order. For other documents, see the documents section of these price sheets.
Misc.	Note: If no tag number is advised, tag will be left blank
High Temperature	/HT only available from 1" to 8" for 600# and 1" to 6" for /900#
Anti-Corriston Version (/HY)	/HY cannot be combined with /MV

**Product Notes**
Note Id	Description
1	/HY required unless /HT is selected
2	/HY only available up to 8" for 600# and 6" for /900#
3	/HT only available from 1" to 8" for 600# and 1" to 6" for /900#
4	/HT combined with /MV 1" to 8" for 600# and 1" to 6" for /900#
5	Output may be 4-20 mA and Pulse.
6	Unit will not function unless connected to a DYA Converter.
7	Call Factory for lead time. Not available with /R1 or /R2 option
8	Includes calibration certificate and flowtest traceable report. Meters manufactured and tested at YCA are traceable to NIST.
9	Option follows electronics. If Remote converter (-N) is selected option can be selected on DYA
10	Includes stamping of customer supplied code on the tag. Maximum length 24 characters x 2 lines. If a blank tag is wanted, the order MUST state "Blank Tag",
11	Body CMTR: Foundry test and certificate attesting to the composition of body casting with an endorsement by Yokogawa giving the S/N of the meter in which the casting was used.
12	Wetted CMTR: Same as body CMTR with the additional certificates for the shedder bar, plug and welding material.
13	Nitrogen Pressure Test is done as a standard procedure on all 0.5" thru 8" 150# and 300# meters. Also for 0.5" thru 1.5" 600# meters. All other sizes and flange ratings are hydrostatic pressure tested.
14	Hydrostatic Pressure Test (water) is done as a standard procedure on 10" & 12" 150# and 300# and 2" thru 8" 600# and 900# meters. Other sizes and flange ratings can be hydro tested by using this option.
15	NACE Material /NC can not combine with ASME welding documents submission /WP
16	PMI test certificate for meterbody
17	PMI test certificate for meterbody and shedder bar,
18	Dye Penetrant test certificate
19	Material Certificate:3.1 (3.1 certificate to be attached according to EN10204); meterbody
20	Material Certificate:3.1 (3.1 certificate to be attached according to EN10204); meterbody & shedder bar
21	Material Certificate:3.1 (3.1 certificate to be attached according to EN10204); meterbody & shedder bar & bottom plug
22	Material Certificate:3.1 (3.1 certificate to be attached according to EN10204); meterbody & shedder bar & bottom plug & welding rod
23	/HY cannot be combined with /MV

DY150 6 Inch ID

01 Amp (Please make one selection)

02 Body Material

03 Shedder Material

04 Process Connection (Please make one selection)

05 Electrical Connection

06 Indicator (Please make one selection)

001-003 Optional Features

001-003 Optional Features

001-003 Optional Features

004A Certification

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Amp
(Please make one selection)

04 Process Connection
(Please make one selection)

06 Indicator
(Please make one selection)