YCA Store | Products | Flowmeters | YEWFLO | digitalYEWFLO

Product Categories

#	Model/Spec/Part No.	Description	Notes
DY025 1 Inch ID
01 Amp (Please make one selection)
	-D	4 to 20mA DC,Pulse,BRAIN Communication	1,16
	-E	4 to 20mA DC, Pulse, HART 5 Communication	1,16
	-F	Digital communication (Foundation Fieldbus protocol)	7,16
	-J	4 to 20mA DC, Pulse, HART 7 Communication	1,16
	-N	Remote Type Detector	2
02 Body Material
	X	Others
03 Shedder Material
	X	Others
04 Process Connection (Please make one selection)
	AA1	ANSI 150 Wafer Type
	AA2	ANSI 300 Wafer Type
	AA4	ANSI 600 Wafer Type
	BA1	ANSI 150 Flange type (Raised Face)
	BA2	ANSI 300 Flange type (Raised Face)
	BA4	ANSI 600 Flange type (Raised Face)
	BA5	ANSI 900 Flange type (Raised Face)
	CA4	ANSI 600 Flange type (Ring Joint)
	CA5	ANSI 900 Flange type (Ring Joint)
05 Electrical Connection (Please make one selection)
	-2	ANSI 1/2NPT Female
	-4	ISO M20x1.5 Female
06 Indicator (Please make one selection)
	D	With Indicator
	N	None Indicator
001-003 Optional Features
	/HY	Anti-corrosion version 2
	/NC	NACE Material
001-003 Optional Features
	/L2	Calibration Certificate, Level 2 Declaration and Calibration Equipment List	11
001-003 Optional Features
	/X1	Epoxy Coating
004A Certification
	/CF1	CSA Explosion proof	16
	/CF11	CSA Explosion proof : DUAL SEAL	16
	/CS1	CSA Intrinsically Safe Ex ia IIC T4...T1 and Ex nC IIC T4...T1 (Integral) Ex ia IIC T4 and Ex nC IIC T4 (Remote)	16
	/CS11	CSA Intrinsically Safe: DUAL SEAL Ex ia IIC T4...T1 and Ex nC IIC T4...T1 (Integral) Ex ia IIC T4 and Ex nC IIC T4 (Remote)	16
	/FF1	FM Explosion proof
	/FS1	FM Intrinsically Safe / Nonincendive	16
	/FS16	FM Intrinsically Safe for FOUNDATION Fieldbus Communication Type AEx ia IIB/IIC, T4, Entity, FISCO and Nonincendive, FNICO	16
005-030 Optional Features
	/A	Lightning Protector	4
005-030 Optional Features
	/BL	Stainless Steel Bolt & Nut Assembly	3
005-030 Optional Features
	/CRC	Converter Installing Direction 180 deg. Change
005-030 Optional Features
	/E01	Material Certificate(3.1B)(body)
	/E02	Material Certificate(3.1B)(body/shedder)
	/E03	Material Certificate(3.1B)(body/shedder bottom plug)
	/E04	Material Certificate(3.1B)(body/shedder/ bottom plug/welding rod)
005-030 Optional Features
	/E1	Stainless steel housing	17
005-030 Optional Features
	/EE	Software Download (for FOUNDATION Fieldbus Protocol)	8
005-030 Optional Features
	/K1	Degrease Treatment
005-030 Optional Features
	/LC1	PID Function	8
005-030 Optional Features
	/M01	Material Certificate	12
005-030 Optional Features
	/M04	Material Certificate(Mill sheet) (Body/Shedder/Bottom plug/Welding rod)	13
005-030 Optional Features
	/MV	Multi-Variable (built-in temperature sensor) type
005-030 Optional Features
	/NM	Compliance with NAMUR43 Output signal limits: 4 mA to 20.5 mA Output status at CPU failure and hardware error is -2.5%, 3.6 mA or less.	4
005-030 Optional Features
	/PM1	PMI test certificate(Body)
	/PM2	PMI test certificate(Body/Shedder)
005-030 Optional Features
	/PT	Dye Penetrant test certificate (Welded portion for the bottom plug and the flange)
005-030 Optional Features
	/R1	Reduced Bore Type(one size down)	15
005-030 Optional Features
	/SCT	Stainless Steel Tag Plate	5
005-030 Optional Features
	/T01	Static Pressure and Leakage Test Certificate	9
005-030 Optional Features
	/T02	Hydrostatic pressure test certificate	10
005-030 Optional Features
	/WP	WQ,WPS,PQR(Welded portion for the bottom plug and flange)
005-030 Optional Features
	/X2	Pilling up coating to keep off corrosion

Your Product

Subgroup | Page

YEWFLO | digitalYEWFLO

Model

DY025

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	MODEL NUMBER: specify the Model Number by choosing one code from each section, multiple codes can be chosen from the "Options" section. OPTIONS: Must be listed in the sequence shown in the options section.
How to build MS Code	Specify the Model Number by choosing one code from each section, multiple codes can be chosen from the "Options" Section"
Example MS Code	DY080-DXXBA1-2D/FF1/HY/SCT is a 3.0" 150 # flange style meter, CF8M body and Hastelloy C shedder bar, integral electronics with display and BRAIN Communications; FM Explosion Proof Certification and
Pricing	Total the amount shown to arrive at a list price.
Delivery	Please Consult Your Order Analyst for Delivery.
Documents	The programming sheet produced by the Digital YEWFLO. Sizing Program MUST be included with your order. General Specifications GS01F06A00-01E-A Instruction Manual IM1F6A0-01E-A $10.00
PRESSURE LIMITS (psig) per ANSI B16.5	TEMP ANSI FLANGE RATING (PSIG) (°F) 150# 300# 600# 900# <100 275 720 1440 2160 200 235 620 1240 1860 300 215 560 1120 1680 400 195 515 1025 1540 500 170 480 955 1435 600 140 450 900 1355 650 125 445 890 1330 700 110 430 870 1305 750 95 425 855 1280 800 80 420 845 1265 850 65 420 835
MISC	Description: CF8M SS body, Hastelloy C Shedder Bar, Teflon coated Hastelloy C shedder bar gasket. Electronic Housing is NEMA 4X with ANSI 0.5" FNPT Electrical Connection. Simultaneous 4 to 20 mA DC and Pulse output. Digital Indicator/Display is optional. Wafer style meters are supplied with one set of carbon steel bolts, nuts and centering hardware. NOTE: If no tag number is advised, tag will be left blank.

**Product Notes**
Note Id	Description
1	Output may be 4-20 mA and Pulse.
2	Unit will not function unless connected to a DYA Converter.
3	Available on wafer style Meters Only.
4	Option follows the electronics. If Remote Converter (-N) is selected option can be selected on DYA Converter.
5	Includes stamping of customer supplied code on the tag. Maximum length 24 characters x 2 lines. If a blank tag is wanted, the order MUST state "Blank Tag".
6	Not available on 0.5 Inch Meters. Required when Process Temperature will exceed 500 deg F. Remote Style meters only
7	Not Available with CSA I.S. Certification
8	Applicable with Foundation Fieldbus (-F) only.
9	Nitrogen Pressure Test is done as a standard procedure on all 0.5" thru 8" 150# and 300# meters. Also for 0.5" thru 1.5" 600# meters. All other sizes and flange ratings are hydrostatic pressure tested.
10	Hydrostatic Pressure Test (water) is done as a standard procedure on 10" & 12" 150# and 300# and 2" thru 8" 600# and 900# meters. Other sizes and flange ratings can be hydro tested by using this option.
11	Includes calibration certificate and flowtest traceable report. Meters manufactured and tested at YCA are traceable to NIST.
12	Body CMTR: Foundry test and certificate attesting to the composition of body casting with an endorsement by Yokogawa giving the S/N of the meter in which the casting was used. Meters manufactured and tested in Japan or China are traceable to the National Institute of Advanced Industrial Science and Technology.
13	Wetted CMTR: Same as body CMTR with the additional certificates for the shedder bar, plug and welding material. This certificate is for the body only and does not include the shedder bar, plug and welding
14	/MV not available
15	Reduction meters available in 150#, BA1, and 300#, BA2 flanges only.
16	Not available with option /E1
17	Only available with Remote Units
18	PMI test certificate for meterbody
19	PMI test certificate for meterbody and shedder bar,
20	Dye Penetrant test certificate
21	Material Certificate:3.1 (3.1 certificate to be attached according to EN10204); meterbody
22	Material Certificate:3.1 (3.1 certificate to be attached according to EN10204); meterbody & shedder bar
23	Material Certificate:3.1 (3.1 certificate to be attached according to EN10204); meterbody & shedder bar & bottom plug
25	NACE Material /NC can not combine with ASME welding documents submission /WP.
24	Material Certificate:3.1 (3.1 certificate to be attached according to EN10204); meterbody & shedder bar & bottom plug & welding rod

DY025 1 Inch ID

01 Amp (Please make one selection)

02 Body Material

03 Shedder Material

04 Process Connection (Please make one selection)

05 Electrical Connection (Please make one selection)

06 Indicator (Please make one selection)

001-003 Optional Features

001-003 Optional Features

001-003 Optional Features

004A Certification

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

005-030 Optional Features

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Amp
(Please make one selection)

04 Process Connection
(Please make one selection)

05 Electrical Connection
(Please make one selection)

06 Indicator
(Please make one selection)