YCA Store | Products | High Frequency Instruments | Digital Oscilloscopes | DLM3000HD Series - High Definition Oscilloscope

#	Model/Spec/Part No.	Description
DLM3054HD DLM3054HD High Definition Oscilloscope
01 Power cord
	-D	UL/CSA Standard and PSE compliant Rated voltage: 125 V
02 Language support
	-HE	English message and panel
001 Logic input
	/LN	No switchable logic input
002 Printer
	/B5	Built-in printer
003 Memory expansion
	/M1	Memory expansion to 25M/125M/250M Points
	/M2	Memory expansion to 50M/250M/500M Points
	/M3	Memory expansion to 125M/500M/1G Points
004 Probe power
	/P4	4 probe power terminals
005 Interface
	/C1	GP-IB interface + GO/NO-GO terminal
	/SY	Synchronous operation
006 Internal storage
	/C8	Internal storage
007 IEEE1588
	/CY	IEEE1588 master function
009 Calculation 1
	/G2	User-defined math function
	/G3	Power supply analysis function
	/GA	User-defined math function + Power supply analysis function
010 Protocol analysis 1
	/F1	UART + I2C + SPI trigger and analysis
011 Protocol analysis 2
	/F2	CAN + CAN FD + LIN trigger and analysis
012 Protocol analysis 3
	/F3	FlexRay trigger and analysis
013 Protocol analysis 4
	/F4	SENT trigger and analysis
014 Protocol analysis 5
	/F5	CXPI trigger and analysis
015 Protocol analysis 6
	/F6	PSI5 trigger and analysis
030 Probe
	/EX4	Replace whole standard probes with 701949s

(Multiple selections allowed, creates separate lines on the quote.)

Calibration and Warranty
	M1114DYA142	DLM3000 ISO17025 Cal Found/Left Data
	M1223UCA122	DLM3000 NIST Cal As Left Data
	M1223UCA123	DLM3000 3x Annual NIST Cal As Left Data
	M1223UCA124	DLM3000 5x Annual NIST Cal As Left Data
	M1223UDA01	Certificate of Conformance	9
	M1223UFA30	DLM3000 2-YR EXT WARRANTY, 5-YR TOTAL

Your Product

Digital Oscilloscopes | DLM3000HD Series - High Definition Oscilloscope

DLM3054HD

View Cart

**Product Notes**
Note Id	Description
1	Standard memory capacity: During continuous measurement: 12.5 M points; Single mode: 50 M points/125 M points (when odd channels only). Logic probes sold separately.
2	When selecting from these options, please select only one.
3	When odd channels only.
4	Specify this option when using current probes or other differential probes that don’t support probe interface.
5	When selecting from these options, please select only one.
6	This option for both main and sub units and a 701982 connection cable are required for synchronous operation.
7	When selecting from these options, please select only one.
8	When /EX4 option is selected, no 701937 is included.
9	Certificate of Conformance states instrument has been calibrated and meets specifications. It does not include a calibration report with data.