YCA Store | Products | Transmitters | DSS | Model C80FW

Product Categories

#	Model/Spec/Part No.	Description	Notes
C80FW Remote Mount Flanged Diaphragm Seal
01 Seal System Location (Please make one selection)
	-H	for high pressure side
	-L	for low pressure side
02 Seal Fill Fluid (Please make one selection)
	A	for general use (silicone oil) [process temp.]-10 to 315 degC [ambient temp.]-10 to 60 degC
	B	for general use (silicone oil) [process temp.]-30 to 210 degC [ambient temp.]-30 to 60 degC
	D	for oil-prohibited use (fluorinated oil) [process temp.]-20 to 120 degC [ambient temp.]-10 to 60 degC
	1	for high temperature and high vacuum use (silicone oil) [process temp.]-10 to 250 degC [ambient temp.]-10 to 60 degC
	2	for high temperature and high vacuum use (silicone oil) [process temp.]10 to 315 degC [ambient temp.]10 to 60 degC
	4	for high vacuum use (silicone oil) [process temp.]-10 to 100 degC [ambient temp.]-10 to 60 degC
	E	for low temperature use (ethylene glycol) [process temp.]-50 to 100 degC [ambient temp.]-40 to 60 degC
	F	for low temperature use (silicone oil) [process temp.]-70 to 100 degC [ambient temp.]-30 to 60 degC
	P	Propylene glycol [process temp.]-10 to 120 degC [ambient temp.]-10 to 60 degC
03 Transmitter Connection Type (Please make one selection)
	-S	for general use
	-C	with compensation capillary	1
04 Capillary Length (Please make one selection)
	1	1m
	2	2m
	3	3m
	4	4m
	5	5m
	6	6m
	7	7m
	8	8m
	9	9m
	A	10m
	B	11m
	C	12m
	D	13m
	E	14m
	F	15m
05 Capillary Inside Diameter (Please make one selection)
	1	Capillary I.D. 1.3mm
	2	Capillary I.D. 2.03mm
06 Capillary Type (Please make one selection)
	S	PVC sheath for general use
	V	Without PVC sheath for general use
	1	PVC sheath for high temperature and high vacuum use
	2	without PVC sheath for high temperature and high vacuum use
	3	PVC sheath red-color for high temperature and high vacuum use
	5	PVC sheath for high vacuum use
	6	Without PVC sheath for high vacuum use
	7	PVC sheath red-color for high vacuum use
	R	PVC sheath for process operating temperature correction
	T	PVC sheath red-color for process operating temperature correction
	W	PVC sheath red-color for general use
07 Capillary Tube Connection (Please make one selection)
	S	for general use
	C	Short type (Length:100mm)
	T	With corrosion protection
08 Process Connection size (Please make one selection)
	-2	2-inch (50mm)
	-3	3-inch (80mm)
	-8	1 1/2-inch (40mm)
09 Sealing Face (Please make one selection)
	F	Raised face (RF)
	J	Ring type joint (RJ)
10 Gasket Contact Surface (Please make one selection)
	1	Serration
	2	Flat (No serration)
11 Diaphragm Material (Please make one selection)
	H	[Diaphragm] Hastelloy C-276 equivalent
	S	[Diaphragm] 316L SST
	J	[Diaphragm] Hastelloy C-276 equivalent, thickness 0.006inch(0.15mm)
	K	[Diaphragm] Nickel
	M	[Diaphragm] Monel equivalent
	T	[Diaphragm] Tantalum
	U	[Diaphragm] Titanium
	V	[Diaphragm] 316L SST, thickness 0.005inch (0.14mm)
12 Sealing Face Material (Please make one selection)
	H	[Sealing face] Hastelloy C-276 equivalent
	S	316L SST [Sealing face] 316L SST
	K	[Sealing face] Nickel
	M	[Sealing face] Monel equivalent
	T	[Sealing face] Tantalum
	U	[Sealing face] Titanium
13 Diaphragm Diameter (Please make one selection)
	6	[Diaphragm O.D.] 61mm
	9	[Diaphragm O.D.] 90mm
14 Diaphragm Option (Please make one selection)
	N	None
	A	Gold plated diaphragm
	P	With platinum plate
15 ---------
	N	Always N
16 Capillary Connection (Please make one selection)
	A	Side of diaphragm seal unit
	B	Back of Diaphragm Seal Unit
17 Flange Size (Please make one selection)
	-2	2-inch (50mm)
	-3	3-inch (80mm)
	-8	1 1/2-inch (40mm)
18 Flange Standards (Please make one selection)
	A	ANSI
	D	DIN
	J	JIS
	P	JPI
19 Flange Pressure Rating (Please make one selection)
	1	class150
	2	class300
	4	class600
	5	class900
	6	class1500
	A	10K
	B	20K
	C	30K
	D	40K
	E	63K
	H	PN10/16
	K	PN25/40
	L	PN64
20 Flange Type (Please make one selection)
	S	for general use
	J	for Ring type joint (RJ)
21 Flange Material (Please make one selection)
	A	JIS S25C
	B	304 SST or F304 SST
	C	316 SST
	S	316L SST or F316L SST
22 Extended Outside Diameter
	-0	None
23 Extended Length
	0	None
24 --------
	N	Always N
007 Optional Features
	/K31	Degrease cleansing treatment
	/K35	Degrease cleansing and dehydrating treatment
011 Optional Features
	/MCW	Material certificate: flange, block
	/MDW	Material certificate: flange, block, diaphragm
	/MHW	Material certificate: flange, block, diaphragm, seal ring, capillary
015 Optional Features
	/TF1	Teflon film

Your Product

Subgroup | Page

DSS | Model C80FW

Model

C80FW

Configuration

Parts/Accessories (separate line)

View Cart

**General Notes**
Title	Description
How to Order	The descriptions of each item may be simplified and some details omitted. For complete details and specifications, refer to the GS noted. Refer to the "Ordering Information" section of the GS noted.
How to build MS Code	One code must be selected from each section except those marked (Optional). Codes must appear in the model code in the sequence in which they appear. The Specification Selection System (SSS) software can be utilized to build accurate model numbers and ensure proper selection based on application requirements.
Example MS Code	C80FW-LA-S52SS-2F2HH9NNA-3A1SC-00N/MCW
How to determine lead-time	Options marked with the >> marker have a standard lead-time of 10 business days after receipt of order. All codes in the model must contain the >> marker in order to be eligible. Contact customer support for lead-time on all other models.

**Product Notes**
Note Id	Description
1	"With compensation capillary" option applies to unbalanced systems only (high side direct mount seal, low side remote mount seal). Consult factory for other compensation capillary requirements.

**Reference Links**
Link
Specification Selection System (SSS) Software

C80FW Remote Mount Flanged Diaphragm Seal

01 Seal System Location (Please make one selection)

02 Seal Fill Fluid (Please make one selection)

03 Transmitter Connection Type (Please make one selection)

04 Capillary Length (Please make one selection)

05 Capillary Inside Diameter (Please make one selection)

06 Capillary Type (Please make one selection)

07 Capillary Tube Connection (Please make one selection)

08 Process Connection size (Please make one selection)

09 Sealing Face (Please make one selection)

10 Gasket Contact Surface (Please make one selection)

11 Diaphragm Material (Please make one selection)

12 Sealing Face Material (Please make one selection)

13 Diaphragm Diameter (Please make one selection)

14 Diaphragm Option (Please make one selection)

15 ---------

16 Capillary Connection (Please make one selection)

17 Flange Size (Please make one selection)

18 Flange Standards (Please make one selection)

19 Flange Pressure Rating (Please make one selection)

20 Flange Type (Please make one selection)

21 Flange Material (Please make one selection)

22 Extended Outside Diameter

23 Extended Length

24 --------

007 Optional Features

011 Optional Features

015 Optional Features

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Seal System Location
(Please make one selection)

02 Seal Fill Fluid
(Please make one selection)

03 Transmitter Connection Type
(Please make one selection)

04 Capillary Length
(Please make one selection)

05 Capillary Inside Diameter
(Please make one selection)

06 Capillary Type
(Please make one selection)

07 Capillary Tube Connection
(Please make one selection)

08 Process Connection size
(Please make one selection)

09 Sealing Face
(Please make one selection)

10 Gasket Contact Surface
(Please make one selection)

11 Diaphragm Material
(Please make one selection)

12 Sealing Face Material
(Please make one selection)

13 Diaphragm Diameter
(Please make one selection)

14 Diaphragm Option
(Please make one selection)

16 Capillary Connection
(Please make one selection)

17 Flange Size
(Please make one selection)

18 Flange Standards
(Please make one selection)

19 Flange Pressure Rating
(Please make one selection)

20 Flange Type
(Please make one selection)

21 Flange Material
(Please make one selection)