YCA Store | Products | Flowmeters | ADMAG | Integral/Remote Flowtube

Product Categories

#	Model/Spec/Part No.	Description
AXW900G Size 900mm (36 in.) Remote Flowtube
01 Converter - Output/Communication (Please make one selection)
	-B	Remote Sensor (for AXG1A)
	-D	Integral Type, BRAIN and I/O (Type A), Iout(Active) x 1, P/Sout(Passive) x 1
	-E	Integral Type, HART 7 and I/O (Type A), Iout(Active) x 1, P/Sout(Passive) x 1
	-F	FOUNDATION Fieldbus,
	-G	Integral, PROFIBUS PA
	-H	Integral Type, BRAIN and I/O (Type E), Iout(Active) x 1, P/Sout(Passive) x 2, Sin x 1
	-J	Integral Type, HART 7 and I/O (Type E), Iout(Active) x 1, P/Sout(Passive) x 2, Sin x 1
	-K	Integral Type, BRAIN and I/O (Type G), Iout(Active) x 1, P/Sout(Passive) x 1, P/Sout(Active, without resistor) x 1, Sin x 1
	-L	Integral Type, HART 7 and I/O (Type G), Iout(Active) x 1, P/Sout(Passive) x 1, P/Sout(Active, without resistor) x 1, Sin x 1
	-M	Integral Type, Modbus and I/O (Type 0), P/Sout(Passive) x 1
	-N	Remote Sensor (for AXFA11)
	-P	Integral Type, Modbus and I/O (Type 6), P/Sout(Passive) x 1, Iout(Active) x 1
	-W	Remote Sensor (for AXW4A)
02 Power Supply (Please make one selection)
	1	100-240V AC / 100-120V DC
	2	24V AC / DC
	N	None (Remote Sensor)
03 Lining (Please make one selection)
	D	Natural Soft Rubber Lining
	F	PTFE Lining
	H	Natural Hard Rubber Lining
	U	Polyurethane Rubber Lining
04 Electrode Material (Please make one selection)
	H	HASTELLOY C-276 Equivalent
	L	Stainless Steel 316L (AISI 316L SS Equivalent)
05 Electrode Structure
	1	Non-replaceable
06 Grounding Ring/Grounding Electrode Material
	N	None
07 Process Connection (Please make one selection)
	-CA1	ASME B16.47 Series A Class 150 Flange (Carbon Steel)
	-CB1	AWWA C207 Class D Flange (Carbon Steel)
	-CE1	EN 1092-1 PN10 Flange (Carbon Steel) (Fluid pressure up to 1 MPa)
	-CE2	EN 1092-1 PN16 Flange (Carbon Steel) (Fluid pressure up to 1 MPa)
	-CS1	AS2129 Table D Flange (Carbon Steel)
	-CS2	AS2129 Table E Flange (Carbon Steel)
	-CT1	AS4087 PN16 Flange (Carbon Steel)
08 Lay Length
	N	Standard
09 Electrical Connection (Please make one selection)
	-2	ANSI 1/2NPT Female
	-4	ISO M20x1.5 Female
10 Indicator (Please make one selection)
	1	With Indicator (English, Multi-language)
	N	Without Indicator / Remote Sensor
11 Calibration
	B	Standard
001 Grounding Ring
	/GR1	Grounding Rings, Stainless Steel 304 (AISI 304 SS Equivalent)
003 Mass Unit Setting
	/MU	Mass Unit Setting
005 Tag Plate
	/SCT	Stainless Steel Tag Plate
006 Direction Change of the El
	/RA	Rotated Terminal Box 90 degrees
	/RB	Rotated Terminal Box 180 degrees
	/RC	Rotated Terminal Box -90 degrees
007 Material Certificate
	/M01	Material Certificate
008 Hydrostatic Test
	/T01	Hydrostatic Test
009 Calibration Certificate
	/L2	Calibration Certificate, Level 2 Declaration and Calibration Equipment List
010 Specified Flow Calibration
	/SC	Specified Span Five-point Calibration
016 Output Signal on Failure
	/C1	Output Signal on Failure (Low), Current Output (Alarm):2.4 mA or less
	/C2	Output Signal on Failure (Low, NE 43), Current Output (Alarm):2.4 mA or less, Output Signal Range: 3.8 to 20.5 mA
	/C3	Output Signal on Failure (High, NE 43), Current Output (Alarm):21.6 mA or more, Output Signal Range: 3.8 to 20.5 mA
017 microSD Card (Mandatory for Integral Flowtube)
	/MC	microSD Card
057 F&B and Water supply Stand
	/NSF	NSF61 Drinking Water Certification

Your Product

Subgroup | Page

ADMAG | Integral/Remote Flowtube

Model

AXW900G

Configuration

Parts/Accessories (separate line)

View Cart

**Product Notes**
Note Id	Description
1	Set of 2 Grounding rings. Refer to "Cautions for Installation" on Necessary Gaskets
2	Users must consider the characteristics of selected wetted parts material and influence of process fluids.
3	Change the length of signal cable and excitation cable pre-wired with optional code DHC. The maximum cable length is 100 m in combination with the AXG4A transmitter, and 200 m in combination with the AXFA11 transmitter. When optional code L### is not selected, a 30-meter length signal cable and excitation cable are pre-wired.
4	Choose only with integral meter.
5	Choose only with Remote meter.
6	500 mm (20 in.) to 600 mm (24 in.) for lining code F, H, D, U. ASME B16.5 Class 150 Flange (Carbon Steel)
7	700 mm (28 in.) to 1000 mm (40 in.) for lining code F, H, D, U. ASME B16.47 Series A Class 150 Flange (Carbon Steel)
8	500 mm (20 in.) to 600 mm (24 in.) for lining code F, H, D, U
9	“None” is applicable only for metal piping and wiring for grounding will be necessary so that the electric potentials between flowtube and piping flange should be the same. If Grounding Ring is need please use optional code GR1.
10	Consult Factory if end-user is using with DeltaV

AXW900G Size 900mm (36 in.) Remote Flowtube

01 Converter - Output/Communication (Please make one selection)

02 Power Supply (Please make one selection)

03 Lining (Please make one selection)

04 Electrode Material (Please make one selection)

05 Electrode Structure

06 Grounding Ring/Grounding Electrode Material

07 Process Connection (Please make one selection)

08 Lay Length

09 Electrical Connection (Please make one selection)

10 Indicator (Please make one selection)

11 Calibration

001 Grounding Ring

003 Mass Unit Setting

005 Tag Plate

006 Direction Change of the El

007 Material Certificate

008 Hydrostatic Test

009 Calibration Certificate

010 Specified Flow Calibration

016 Output Signal on Failure

017 microSD Card (Mandatory for Integral Flowtube)

057 F&B and Water supply Stand

Category

Subgroup | Page

Model

Configuration

Parts/Accessories (separate line)

01 Converter - Output/Communication
(Please make one selection)

02 Power Supply
(Please make one selection)

03 Lining
(Please make one selection)

04 Electrode Material
(Please make one selection)

07 Process Connection
(Please make one selection)

09 Electrical Connection
(Please make one selection)

10 Indicator
(Please make one selection)